Merge tag 'master-2014-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

John W. Linville says:

====================
pull request: wireless 2014-11-26

Please pull this little batch of fixes intended for the 3.18 stream...

For the iwlwifi one, Emmanuel says:

"Not all the firmware know how to handle the HOT_SPOT_CMD.
Make sure that the firmware will know this command before
sending it. This avoids a firmware crash."

Along with that, Larry sends a pair of rtlwifi fixes to address some
discrepancies from moving drivers out of staging.  Larry says:

"These two patches are needed to fix a regression introduced when
driver rtl8821ae was moved from staging to the regular wireless tree."

Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/wireless/iwlwifi/iwl-fw.h

@@ -155,6 +155,7 @@ enum iwl_ucode_tlv_api {
  * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
  * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
  *	which also implies support for the scheduler configuration command
+ * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
  */
 enum iwl_ucode_tlv_capa {
 	IWL_UCODE_TLV_CAPA_D0I3_SUPPORT			= BIT(0),
@@ -163,6 +164,7 @@ enum iwl_ucode_tlv_capa {
 	IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT	= BIT(10),
 	IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT		= BIT(11),
 	IWL_UCODE_TLV_CAPA_DQA_SUPPORT			= BIT(12),
+	IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT		= BIT(18),
 };
 
 /* The default calibrate table size if not specified by firmware file */

drivers/net/wireless/iwlwifi/mvm/mac80211.c

@@ -2448,9 +2448,15 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw,
 
 	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
-		/* Use aux roc framework (HS20) */
-		ret = iwl_mvm_send_aux_roc_cmd(mvm, channel,
-					       vif, duration);
+		if (mvm->fw->ucode_capa.capa[0] &
+		    IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT) {
+			/* Use aux roc framework (HS20) */
+			ret = iwl_mvm_send_aux_roc_cmd(mvm, channel,
+						       vif, duration);
+			goto out_unlock;
+		}
+		IWL_ERR(mvm, "hotspot not supported\n");
+		ret = -EINVAL;
 		goto out_unlock;
 	case NL80211_IFTYPE_P2P_DEVICE:
 		/* handle below */

drivers/net/wireless/rtlwifi/pci.c

@@ -2249,6 +2249,16 @@ int rtl_pci_probe(struct pci_dev *pdev,
 	/*like read eeprom and so on */
 	rtlpriv->cfg->ops->read_eeprom_info(hw);
 
+	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n");
+		err = -ENODEV;
+		goto fail3;
+	}
+	rtlpriv->cfg->ops->init_sw_leds(hw);
+
+	/*aspm */
+	rtl_pci_init_aspm(hw);
+
 	/* Init mac80211 sw */
 	err = rtl_init_core(hw);
 	if (err) {
@@ -2264,16 +2274,6 @@ int rtl_pci_probe(struct pci_dev *pdev,
 		goto fail3;
 	}
 
-	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n");
-		err = -ENODEV;
-		goto fail3;
-	}
-	rtlpriv->cfg->ops->init_sw_leds(hw);
-
-	/*aspm */
-	rtl_pci_init_aspm(hw);
-
 	err = ieee80211_register_hw(hw);
 	if (err) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,

drivers/net/wireless/rtlwifi/rtl8821ae/hw.c

@@ -3672,8 +3672,9 @@ static void rtl8821ae_update_hal_rate_mask(struct ieee80211_hw *hw,
 		mac->opmode == NL80211_IFTYPE_ADHOC)
 		macid = sta->aid + 1;
 	if (wirelessmode == WIRELESS_MODE_N_5G ||
-	    wirelessmode == WIRELESS_MODE_AC_5G)
-		ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ];
+	    wirelessmode == WIRELESS_MODE_AC_5G ||
+	    wirelessmode == WIRELESS_MODE_A)
+		ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ] << 4;
 	else
 		ratr_bitmap = sta->supp_rates[NL80211_BAND_2GHZ];