Commit d1dfe53b authored by Rusty Russell's avatar Rusty Russell Committed by Linus Torvalds

[PATCH] add help texts for sound_oss_Kconfig

From:  Steven Cole <elenstev@mesatop.com>

  This is a slightly improved version of the additional help texts for
  sound/oss/Kconfig.  The originals were obtained from 2.4.21-pre4.
parent 014ec19d
...@@ -37,20 +37,36 @@ config SOUND_CMPCI ...@@ -37,20 +37,36 @@ config SOUND_CMPCI
config SOUND_CMPCI_FM config SOUND_CMPCI_FM
bool "Enable legacy FM" bool "Enable legacy FM"
depends on SOUND_CMPCI depends on SOUND_CMPCI
help
Say Y here to enable the legacy FM (frequency-modulation) synthesis
support on a card using the CMI8338 or CMI8378 chipset.
Say N here if you don't need this.
config SOUND_CMPCI_FMIO config SOUND_CMPCI_FMIO
hex "FM I/O 388, 3C8, 3E0, 3E8" hex "FM I/O 388, 3C8, 3E0, 3E8"
depends on SOUND_CMPCI_FM depends on SOUND_CMPCI_FM
default "388" default "388"
help
Set the base I/O address for FM synthesis control on a card using
the CMI8338 or CMI8378 chipset.
The default is 388; other choices are 3c8, 3e0, or 3e8.
config SOUND_CMPCI_MIDI config SOUND_CMPCI_MIDI
bool "Enable legacy MPU-401" bool "Enable legacy MPU-401"
depends on SOUND_CMPCI depends on SOUND_CMPCI
help
Say Y here to enable the legacy MP401 MIDI synthesis support on a
card using the CMI8338 or CMI8378 chipset.
Say N here if you don't need this.
config SOUND_CMPCI_MPUIO config SOUND_CMPCI_MPUIO
hex "MPU-401 I/O 330, 320, 310, 300" hex "MPU-401 I/O 330, 320, 310, 300"
depends on SOUND_CMPCI_MIDI depends on SOUND_CMPCI_MIDI
default "330" default "330"
help
Set the base I/O address for MP401 MIDI synthesis control on a card
using the CMI8338 or CMI8378 chipset.
The default is 330; other choices are 320, 310, or 300.
config SOUND_CMPCI_JOYSTICK config SOUND_CMPCI_JOYSTICK
bool "Enable joystick" bool "Enable joystick"
...@@ -75,6 +91,10 @@ config SOUND_CMPCI_CM8738 ...@@ -75,6 +91,10 @@ config SOUND_CMPCI_CM8738
config SOUND_CMPCI_SPDIFINVERSE config SOUND_CMPCI_SPDIFINVERSE
bool "Inverse S/PDIF in for CMI8738" bool "Inverse S/PDIF in for CMI8738"
depends on SOUND_CMPCI_CM8738 depends on SOUND_CMPCI_CM8738
help
Say Y here to have the driver invert the signal presented on SPDIF IN
of a card using the CMI8338 or CMI8378 chipset.
Say N here if you don't need this.
config SOUND_CMPCI_SPDIFLOOP config SOUND_CMPCI_SPDIFLOOP
bool "Enable S/PDIF loop for CMI8738" bool "Enable S/PDIF loop for CMI8738"
...@@ -101,10 +121,16 @@ config SOUND_CMPCI_SPEAKERS ...@@ -101,10 +121,16 @@ config SOUND_CMPCI_SPEAKERS
config SOUND_CMPCI_LINE_REAR config SOUND_CMPCI_LINE_REAR
bool "Use Line-in as Read-out" bool "Use Line-in as Read-out"
depends on SOUND_CMPCI_CM8738 && SOUND_CMPCI_SPEAKERS!=2 depends on SOUND_CMPCI_CM8738 && SOUND_CMPCI_SPEAKERS!=2
help
Say Y here to enable using line-in jack as an output jack for a rear
speaker. Say N here if you don't need this.
config SOUND_CMPCI_LINE_BASS config SOUND_CMPCI_LINE_BASS
bool "Use Line-in as Bass" bool "Use Line-in as Bass"
depends on SOUND_CMPCI_CM8738 && SOUND_CMPCI_SPEAKERS!=2 depends on SOUND_CMPCI_CM8738 && SOUND_CMPCI_SPEAKERS!=2
help
Say Y here to enable using line-in jack as an output jack for a bass
speaker. Say N here if you don't need this.
config SOUND_EMU10K1 config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)" tristate "Creative SBLive! (EMU10K1)"
...@@ -237,6 +263,10 @@ config SOUND_VWSND ...@@ -237,6 +263,10 @@ config SOUND_VWSND
config SOUND_VRC5477 config SOUND_VRC5477
tristate "NEC Vrc5477 AC97 sound" tristate "NEC Vrc5477 AC97 sound"
depends on SOUND_PRIME!=n && DDB5477 && SOUND depends on SOUND_PRIME!=n && DDB5477 && SOUND
help
Say Y here to enable sound support for the NEC Vrc5477 chip, an
integrated, multi-function controller chip for MIPS CPUs. Works
with the AC97 codec.
config SOUND_TRIDENT config SOUND_TRIDENT
tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core" tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
...@@ -1015,6 +1045,10 @@ config SC6600_CDROM ...@@ -1015,6 +1045,10 @@ config SC6600_CDROM
int "SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)" int "SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)"
depends on SC6600 depends on SC6600
default "4" default "4"
help
This is used to activate the CD-ROM interface of the Audio Excel
DSP 16 card. Enter: 0 for Sony, 1 for Panasonic, 2 for IDE, 4 for no
CD-ROM present.
config SC6600_CDROMBASE config SC6600_CDROMBASE
hex "SC-6600 CDROM Interface I/O Address" hex "SC-6600 CDROM Interface I/O Address"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment