Commit d20e1b51 authored by Alan Stern's avatar Alan Stern Committed by Ben Hutchings

USB: avoid left shift by -1

commit 53e5f36f upstream.

UBSAN complains about a left shift by -1 in proc_do_submiturb().  This
can occur when an URB is submitted for a bulk or control endpoint on
a high-speed device, since the code doesn't bother to check the
endpoint type; normally only interrupt or isochronous endpoints have
a nonzero bInterval value.

Aside from the fact that the operation is illegal, it shouldn't matter
because the result isn't used.  Still, in theory it could cause a
hardware exception or other problem, so we should work around it.
This patch avoids doing the left shift unless the shift amount is >= 0.

The same piece of code has another problem.  When checking the device
speed (the exponential encoding for interrupt endpoints is used only
by high-speed or faster devices), we need to look for speed >=
USB_SPEED_SUPER as well as speed == USB_SPEED HIGH.  The patch adds
this check.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Reported-by: default avatarVittorio Zecca <zeccav@gmail.com>
Tested-by: default avatarVittorio Zecca <zeccav@gmail.com>
Suggested-by: default avatarBjørn Mork <bjorn@mork.no>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
parent 707fb09b
......@@ -1527,11 +1527,17 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
as->urb->start_frame = uurb->start_frame;
as->urb->number_of_packets = number_of_packets;
as->urb->stream_id = stream_id;
if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
ps->dev->speed == USB_SPEED_HIGH)
as->urb->interval = 1 << min(15, ep->desc.bInterval - 1);
else
as->urb->interval = ep->desc.bInterval;
if (ep->desc.bInterval) {
if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
ps->dev->speed == USB_SPEED_HIGH ||
ps->dev->speed >= USB_SPEED_SUPER)
as->urb->interval = 1 <<
min(15, ep->desc.bInterval - 1);
else
as->urb->interval = ep->desc.bInterval;
}
as->urb->context = as;
as->urb->complete = async_completed;
for (totlen = u = 0; u < number_of_packets; u++) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment