Commit d21c356b authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] libata: fix ata_xfer_tbl termination
  [PATCH] libata: make ata_qc_issue complete failed qcs
  [PATCH] libata: fix ata_qc_issue failure path
  [PATCH] ata_piix: fix ich6/m_map_db
  [libata] ahci: add ATI SB600 PCI IDs
parents 108b42b4 be9a50c8
......@@ -293,6 +293,10 @@ static const struct pci_device_id ahci_pci_tbl[] = {
board_ahci }, /* JMicron JMB360 */
{ 0x197b, 0x2363, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_ahci }, /* JMicron JMB363 */
{ PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_ahci }, /* ATI SB600 non-raid */
{ PCI_VENDOR_ID_ATI, 0x4381, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_ahci }, /* ATI SB600 raid */
{ } /* terminate list */
};
......
......@@ -301,7 +301,7 @@ static struct piix_map_db ich6_map_db = {
.mask = 0x3,
.map = {
/* PM PS SM SS MAP */
{ P0, P1, P2, P3 }, /* 00b */
{ P0, P2, P1, P3 }, /* 00b */
{ IDE, IDE, P1, P3 }, /* 01b */
{ P0, P2, IDE, IDE }, /* 10b */
{ RV, RV, RV, RV },
......@@ -312,7 +312,7 @@ static struct piix_map_db ich6m_map_db = {
.mask = 0x3,
.map = {
/* PM PS SM SS MAP */
{ P0, P1, P2, P3 }, /* 00b */
{ P0, P2, RV, RV }, /* 00b */
{ RV, RV, RV, RV },
{ P0, P2, IDE, IDE }, /* 10b */
{ RV, RV, RV, RV },
......
......@@ -278,7 +278,7 @@ static void ata_unpack_xfermask(unsigned int xfer_mask,
}
static const struct ata_xfer_ent {
unsigned int shift, bits;
int shift, bits;
u8 base;
} ata_xfer_tbl[] = {
{ ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 },
......@@ -989,9 +989,7 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
qc->private_data = &wait;
qc->complete_fn = ata_qc_complete_internal;
qc->err_mask = ata_qc_issue(qc);
if (qc->err_mask)
ata_qc_complete(qc);
ata_qc_issue(qc);
spin_unlock_irqrestore(&ap->host_set->lock, flags);
......@@ -3997,15 +3995,14 @@ static inline int ata_should_dma_map(struct ata_queued_cmd *qc)
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
* RETURNS:
* Zero on success, AC_ERR_* mask on failure
*/
unsigned int ata_qc_issue(struct ata_queued_cmd *qc)
void ata_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
qc->ap->active_tag = qc->tag;
qc->flags |= ATA_QCFLAG_ACTIVE;
if (ata_should_dma_map(qc)) {
if (qc->flags & ATA_QCFLAG_SG) {
if (ata_sg_setup(qc))
......@@ -4020,17 +4017,18 @@ unsigned int ata_qc_issue(struct ata_queued_cmd *qc)
ap->ops->qc_prep(qc);
qc->ap->active_tag = qc->tag;
qc->flags |= ATA_QCFLAG_ACTIVE;
return ap->ops->qc_issue(qc);
qc->err_mask |= ap->ops->qc_issue(qc);
if (unlikely(qc->err_mask))
goto err;
return;
sg_err:
qc->flags &= ~ATA_QCFLAG_DMAMAP;
return AC_ERR_SYSTEM;
qc->err_mask |= AC_ERR_SYSTEM;
err:
ata_qc_complete(qc);
}
/**
* ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
* @qc: command to issue to device
......
......@@ -1431,9 +1431,7 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev,
goto early_finish;
/* select device, send command to hardware */
qc->err_mask = ata_qc_issue(qc);
if (qc->err_mask)
ata_qc_complete(qc);
ata_qc_issue(qc);
VPRINTK("EXIT\n");
return;
......@@ -2199,9 +2197,7 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
qc->complete_fn = atapi_sense_complete;
qc->err_mask = ata_qc_issue(qc);
if (qc->err_mask)
ata_qc_complete(qc);
ata_qc_issue(qc);
DPRINTK("EXIT\n");
}
......
......@@ -47,7 +47,7 @@ extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
extern void ata_port_flush_task(struct ata_port *ap);
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern unsigned int ata_qc_issue(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment