Commit d27637ec authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO fixes from Greg KH:
 "Here are some small Staging and IIO driver fixes for 5.10-rc5. They
  include:

   - IIO fixes for reported regressions and problems

   - new device ids for IIO drivers

   - new device id for rtl8723bs driver

   - staging ralink driver Kconfig dependency fix

   - staging mt7621-pci bus resource fix

  All of these have been in linux-next all week with no reported issues"

* tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode
  iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum
  docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI
  iio: light: fix kconfig dependency bug for VCNL4035
  iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used
  iio/adc: ingenic: Fix battery VREF for JZ4770 SoC
  staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids
  staging: ralink-gdma: fix kconfig dependency bug for DMA_RALINK
  staging: mt7621-pci: avoid to request pci bus resources
  iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout
  counter/ti-eqep: Fix regmap max_register
  iio: adc: stm32-adc: fix a regression when using dma and irq
  iio: adc: mediatek: fix unset field
  iio: cros_ec: Use default frequencies when EC returns invalid information
parents de758035 2dde2821
......@@ -109,30 +109,6 @@ Description:
When counting down the counter start from preset value
and fire event when reach 0.
What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
Description:
Reading returns the list possible quadrature modes.
What: /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
Description:
Configure the device counter quadrature modes:
channel_A:
Encoder A input servers as the count input and B as
the UP/DOWN direction control input.
channel_B:
Encoder B input serves as the count input and A as
the UP/DOWN direction control input.
quadrature:
Encoder A and B inputs are mixed to get direction
and count with a scale of 0.25.
What: /sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
......
......@@ -368,7 +368,7 @@ static const struct regmap_config ti_eqep_regmap32_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = 0x24,
.max_register = QUPRD,
};
static const struct regmap_config ti_eqep_regmap16_config = {
......@@ -376,7 +376,7 @@ static const struct regmap_config ti_eqep_regmap16_config = {
.reg_bits = 16,
.val_bits = 16,
.reg_stride = 2,
.max_register = 0x1e,
.max_register = QCPRDLAT,
};
static int ti_eqep_probe(struct platform_device *pdev)
......
......@@ -126,6 +126,12 @@ enum kx_chipset {
KX_MAX_CHIPS /* this must be last */
};
enum kx_acpi_type {
ACPI_GENERIC,
ACPI_SMO8500,
ACPI_KIOX010A,
};
struct kxcjk1013_data {
struct i2c_client *client;
struct iio_trigger *dready_trig;
......@@ -143,7 +149,7 @@ struct kxcjk1013_data {
bool motion_trigger_on;
int64_t timestamp;
enum kx_chipset chipset;
bool is_smo8500_device;
enum kx_acpi_type acpi_type;
};
enum kxcjk1013_axis {
......@@ -270,6 +276,32 @@ static const struct {
{19163, 1, 0},
{38326, 0, 1} };
#ifdef CONFIG_ACPI
enum kiox010a_fn_index {
KIOX010A_SET_LAPTOP_MODE = 1,
KIOX010A_SET_TABLET_MODE = 2,
};
static int kiox010a_dsm(struct device *dev, int fn_index)
{
acpi_handle handle = ACPI_HANDLE(dev);
guid_t kiox010a_dsm_guid;
union acpi_object *obj;
if (!handle)
return -ENODEV;
guid_parse("1f339696-d475-4e26-8cad-2e9f8e6d7a91", &kiox010a_dsm_guid);
obj = acpi_evaluate_dsm(handle, &kiox010a_dsm_guid, 1, fn_index, NULL);
if (!obj)
return -EIO;
ACPI_FREE(obj);
return 0;
}
#endif
static int kxcjk1013_set_mode(struct kxcjk1013_data *data,
enum kxcjk1013_mode mode)
{
......@@ -347,6 +379,13 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
{
int ret;
#ifdef CONFIG_ACPI
if (data->acpi_type == ACPI_KIOX010A) {
/* Make sure the kbd and touchpad on 2-in-1s using 2 KXCJ91008-s work */
kiox010a_dsm(&data->client->dev, KIOX010A_SET_LAPTOP_MODE);
}
#endif
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_WHO_AM_I);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading who_am_i\n");
......@@ -1247,7 +1286,7 @@ static irqreturn_t kxcjk1013_data_rdy_trig_poll(int irq, void *private)
static const char *kxcjk1013_match_acpi_device(struct device *dev,
enum kx_chipset *chipset,
bool *is_smo8500_device)
enum kx_acpi_type *acpi_type)
{
const struct acpi_device_id *id;
......@@ -1256,7 +1295,9 @@ static const char *kxcjk1013_match_acpi_device(struct device *dev,
return NULL;
if (strcmp(id->id, "SMO8500") == 0)
*is_smo8500_device = true;
*acpi_type = ACPI_SMO8500;
else if (strcmp(id->id, "KIOX010A") == 0)
*acpi_type = ACPI_KIOX010A;
*chipset = (enum kx_chipset)id->driver_data;
......@@ -1299,7 +1340,7 @@ static int kxcjk1013_probe(struct i2c_client *client,
} else if (ACPI_HANDLE(&client->dev)) {
name = kxcjk1013_match_acpi_device(&client->dev,
&data->chipset,
&data->is_smo8500_device);
&data->acpi_type);
} else
return -ENODEV;
......@@ -1316,7 +1357,7 @@ static int kxcjk1013_probe(struct i2c_client *client,
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &kxcjk1013_info;
if (client->irq > 0 && !data->is_smo8500_device) {
if (client->irq > 0 && data->acpi_type != ACPI_SMO8500) {
ret = devm_request_threaded_irq(&client->dev, client->irq,
kxcjk1013_data_rdy_trig_poll,
kxcjk1013_event_handler,
......
......@@ -71,7 +71,7 @@
#define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS 10
#define JZ4740_ADC_BATTERY_HIGH_VREF (7500 * 0.986)
#define JZ4740_ADC_BATTERY_HIGH_VREF_BITS 12
#define JZ4770_ADC_BATTERY_VREF 6600
#define JZ4770_ADC_BATTERY_VREF 1200
#define JZ4770_ADC_BATTERY_VREF_BITS 12
#define JZ_ADC_IRQ_AUX BIT(0)
......@@ -177,13 +177,12 @@ static void ingenic_adc_set_config(struct ingenic_adc *adc,
mutex_unlock(&adc->lock);
}
static void ingenic_adc_enable(struct ingenic_adc *adc,
int engine,
bool enabled)
static void ingenic_adc_enable_unlocked(struct ingenic_adc *adc,
int engine,
bool enabled)
{
u8 val;
mutex_lock(&adc->lock);
val = readb(adc->base + JZ_ADC_REG_ENABLE);
if (enabled)
......@@ -192,20 +191,41 @@ static void ingenic_adc_enable(struct ingenic_adc *adc,
val &= ~BIT(engine);
writeb(val, adc->base + JZ_ADC_REG_ENABLE);
}
static void ingenic_adc_enable(struct ingenic_adc *adc,
int engine,
bool enabled)
{
mutex_lock(&adc->lock);
ingenic_adc_enable_unlocked(adc, engine, enabled);
mutex_unlock(&adc->lock);
}
static int ingenic_adc_capture(struct ingenic_adc *adc,
int engine)
{
u32 cfg;
u8 val;
int ret;
ingenic_adc_enable(adc, engine, true);
/*
* Disable CMD_SEL temporarily, because it causes wrong VBAT readings,
* probably due to the switch of VREF. We must keep the lock here to
* avoid races with the buffer enable/disable functions.
*/
mutex_lock(&adc->lock);
cfg = readl(adc->base + JZ_ADC_REG_CFG);
writel(cfg & ~JZ_ADC_REG_CFG_CMD_SEL, adc->base + JZ_ADC_REG_CFG);
ingenic_adc_enable_unlocked(adc, engine, true);
ret = readb_poll_timeout(adc->base + JZ_ADC_REG_ENABLE, val,
!(val & BIT(engine)), 250, 1000);
if (ret)
ingenic_adc_enable(adc, engine, false);
ingenic_adc_enable_unlocked(adc, engine, false);
writel(cfg, adc->base + JZ_ADC_REG_CFG);
mutex_unlock(&adc->lock);
return ret;
}
......
......@@ -9,9 +9,9 @@
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/iopoll.h>
#include <linux/io.h>
#include <linux/iio/iio.h>
......@@ -276,6 +276,8 @@ static int mt6577_auxadc_probe(struct platform_device *pdev)
goto err_disable_clk;
}
adc_dev->dev_comp = device_get_match_data(&pdev->dev);
mutex_init(&adc_dev->lock);
mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,
......
......@@ -41,18 +41,16 @@
* struct stm32_adc_common_regs - stm32 common registers
* @csr: common status register offset
* @ccr: common control register offset
* @eoc1_msk: adc1 end of conversion flag in @csr
* @eoc2_msk: adc2 end of conversion flag in @csr
* @eoc3_msk: adc3 end of conversion flag in @csr
* @eoc_msk: array of eoc (end of conversion flag) masks in csr for adc1..n
* @ovr_msk: array of ovr (overrun flag) masks in csr for adc1..n
* @ier: interrupt enable register offset for each adc
* @eocie_msk: end of conversion interrupt enable mask in @ier
*/
struct stm32_adc_common_regs {
u32 csr;
u32 ccr;
u32 eoc1_msk;
u32 eoc2_msk;
u32 eoc3_msk;
u32 eoc_msk[STM32_ADC_MAX_ADCS];
u32 ovr_msk[STM32_ADC_MAX_ADCS];
u32 ier;
u32 eocie_msk;
};
......@@ -282,21 +280,20 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
.csr = STM32F4_ADC_CSR,
.ccr = STM32F4_ADC_CCR,
.eoc1_msk = STM32F4_EOC1 | STM32F4_OVR1,
.eoc2_msk = STM32F4_EOC2 | STM32F4_OVR2,
.eoc3_msk = STM32F4_EOC3 | STM32F4_OVR3,
.eoc_msk = { STM32F4_EOC1, STM32F4_EOC2, STM32F4_EOC3},
.ovr_msk = { STM32F4_OVR1, STM32F4_OVR2, STM32F4_OVR3},
.ier = STM32F4_ADC_CR1,
.eocie_msk = STM32F4_EOCIE | STM32F4_OVRIE,
.eocie_msk = STM32F4_EOCIE,
};
/* STM32H7 common registers definitions */
static const struct stm32_adc_common_regs stm32h7_adc_common_regs = {
.csr = STM32H7_ADC_CSR,
.ccr = STM32H7_ADC_CCR,
.eoc1_msk = STM32H7_EOC_MST | STM32H7_OVR_MST,
.eoc2_msk = STM32H7_EOC_SLV | STM32H7_OVR_SLV,
.eoc_msk = { STM32H7_EOC_MST, STM32H7_EOC_SLV},
.ovr_msk = { STM32H7_OVR_MST, STM32H7_OVR_SLV},
.ier = STM32H7_ADC_IER,
.eocie_msk = STM32H7_EOCIE | STM32H7_OVRIE,
.eocie_msk = STM32H7_EOCIE,
};
static const unsigned int stm32_adc_offset[STM32_ADC_MAX_ADCS] = {
......@@ -318,6 +315,7 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
{
struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
int i;
u32 status;
chained_irq_enter(chip, desc);
......@@ -335,17 +333,12 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
* before invoking the interrupt handler (e.g. call ISR only for
* IRQ-enabled ADCs).
*/
if (status & priv->cfg->regs->eoc1_msk &&
stm32_adc_eoc_enabled(priv, 0))
generic_handle_irq(irq_find_mapping(priv->domain, 0));
if (status & priv->cfg->regs->eoc2_msk &&
stm32_adc_eoc_enabled(priv, 1))
generic_handle_irq(irq_find_mapping(priv->domain, 1));
if (status & priv->cfg->regs->eoc3_msk &&
stm32_adc_eoc_enabled(priv, 2))
generic_handle_irq(irq_find_mapping(priv->domain, 2));
for (i = 0; i < priv->cfg->num_irqs; i++) {
if ((status & priv->cfg->regs->eoc_msk[i] &&
stm32_adc_eoc_enabled(priv, i)) ||
(status & priv->cfg->regs->ovr_msk[i]))
generic_handle_irq(irq_find_mapping(priv->domain, i));
}
chained_irq_exit(chip, desc);
};
......
......@@ -154,6 +154,7 @@ struct stm32_adc;
* @start_conv: routine to start conversions
* @stop_conv: routine to stop conversions
* @unprepare: optional unprepare routine (disable, power-down)
* @irq_clear: routine to clear irqs
* @smp_cycles: programmable sampling time (ADC clock cycles)
*/
struct stm32_adc_cfg {
......@@ -166,6 +167,7 @@ struct stm32_adc_cfg {
void (*start_conv)(struct iio_dev *, bool dma);
void (*stop_conv)(struct iio_dev *);
void (*unprepare)(struct iio_dev *);
void (*irq_clear)(struct iio_dev *indio_dev, u32 msk);
const unsigned int *smp_cycles;
};
......@@ -621,6 +623,13 @@ static void stm32f4_adc_stop_conv(struct iio_dev *indio_dev)
STM32F4_ADON | STM32F4_DMA | STM32F4_DDS);
}
static void stm32f4_adc_irq_clear(struct iio_dev *indio_dev, u32 msk)
{
struct stm32_adc *adc = iio_priv(indio_dev);
stm32_adc_clr_bits(adc, adc->cfg->regs->isr_eoc.reg, msk);
}
static void stm32h7_adc_start_conv(struct iio_dev *indio_dev, bool dma)
{
struct stm32_adc *adc = iio_priv(indio_dev);
......@@ -659,6 +668,13 @@ static void stm32h7_adc_stop_conv(struct iio_dev *indio_dev)
stm32_adc_clr_bits(adc, STM32H7_ADC_CFGR, STM32H7_DMNGT_MASK);
}
static void stm32h7_adc_irq_clear(struct iio_dev *indio_dev, u32 msk)
{
struct stm32_adc *adc = iio_priv(indio_dev);
/* On STM32H7 IRQs are cleared by writing 1 into ISR register */
stm32_adc_set_bits(adc, adc->cfg->regs->isr_eoc.reg, msk);
}
static int stm32h7_adc_exit_pwr_down(struct iio_dev *indio_dev)
{
struct stm32_adc *adc = iio_priv(indio_dev);
......@@ -1235,17 +1251,40 @@ static int stm32_adc_read_raw(struct iio_dev *indio_dev,
}
}
static void stm32_adc_irq_clear(struct iio_dev *indio_dev, u32 msk)
{
struct stm32_adc *adc = iio_priv(indio_dev);
adc->cfg->irq_clear(indio_dev, msk);
}
static irqreturn_t stm32_adc_threaded_isr(int irq, void *data)
{
struct iio_dev *indio_dev = data;
struct stm32_adc *adc = iio_priv(indio_dev);
const struct stm32_adc_regspec *regs = adc->cfg->regs;
u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);
if (status & regs->isr_ovr.mask)
/* Check ovr status right now, as ovr mask should be already disabled */
if (status & regs->isr_ovr.mask) {
/*
* Clear ovr bit to avoid subsequent calls to IRQ handler.
* This requires to stop ADC first. OVR bit state in ISR,
* is propaged to CSR register by hardware.
*/
adc->cfg->stop_conv(indio_dev);
stm32_adc_irq_clear(indio_dev, regs->isr_ovr.mask);
dev_err(&indio_dev->dev, "Overrun, stopping: restart needed\n");
return IRQ_HANDLED;
}
return IRQ_HANDLED;
if (!(status & mask))
dev_err_ratelimited(&indio_dev->dev,
"Unexpected IRQ: IER=0x%08x, ISR=0x%08x\n",
mask, status);
return IRQ_NONE;
}
static irqreturn_t stm32_adc_isr(int irq, void *data)
......@@ -1254,6 +1293,10 @@ static irqreturn_t stm32_adc_isr(int irq, void *data)
struct stm32_adc *adc = iio_priv(indio_dev);
const struct stm32_adc_regspec *regs = adc->cfg->regs;
u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);
if (!(status & mask))
return IRQ_WAKE_THREAD;
if (status & regs->isr_ovr.mask) {
/*
......@@ -2046,6 +2089,7 @@ static const struct stm32_adc_cfg stm32f4_adc_cfg = {
.start_conv = stm32f4_adc_start_conv,
.stop_conv = stm32f4_adc_stop_conv,
.smp_cycles = stm32f4_adc_smp_cycles,
.irq_clear = stm32f4_adc_irq_clear,
};
static const struct stm32_adc_cfg stm32h7_adc_cfg = {
......@@ -2057,6 +2101,7 @@ static const struct stm32_adc_cfg stm32h7_adc_cfg = {
.prepare = stm32h7_adc_prepare,
.unprepare = stm32h7_adc_unprepare,
.smp_cycles = stm32h7_adc_smp_cycles,
.irq_clear = stm32h7_adc_irq_clear,
};
static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
......@@ -2069,6 +2114,7 @@ static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
.prepare = stm32h7_adc_prepare,
.unprepare = stm32h7_adc_unprepare,
.smp_cycles = stm32h7_adc_smp_cycles,
.irq_clear = stm32h7_adc_irq_clear,
};
static const struct of_device_id stm32_adc_of_match[] = {
......
......@@ -256,7 +256,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
struct cros_ec_sensorhub *sensor_hub = dev_get_drvdata(dev->parent);
struct cros_ec_dev *ec = sensor_hub->ec;
struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
u32 ver_mask;
u32 ver_mask, temp;
int frequencies[ARRAY_SIZE(state->frequencies) / 2] = { 0 };
int ret, i;
......@@ -311,10 +311,16 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
&frequencies[2],
&state->fifo_max_event_count);
} else {
frequencies[1] = state->resp->info_3.min_frequency;
frequencies[2] = state->resp->info_3.max_frequency;
state->fifo_max_event_count =
state->resp->info_3.fifo_max_event_count;
if (state->resp->info_3.max_frequency == 0) {
get_default_min_max_freq(state->resp->info.type,
&frequencies[1],
&frequencies[2],
&temp);
} else {
frequencies[1] = state->resp->info_3.min_frequency;
frequencies[2] = state->resp->info_3.max_frequency;
}
state->fifo_max_event_count = state->resp->info_3.fifo_max_event_count;
}
for (i = 0; i < ARRAY_SIZE(frequencies); i++) {
state->frequencies[2 * i] = frequencies[i] / 1000;
......
......@@ -156,11 +156,13 @@ static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
{
struct st_lsm6dsx_sensor *sensor;
u32 odr;
u32 odr, timeout;
sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
odr = (hw->enable_mask & BIT(ST_LSM6DSX_ID_ACC)) ? sensor->odr : 12500;
msleep((2000000U / odr) + 1);
/* set 10ms as minimum timeout for i2c slave configuration */
timeout = max_t(u32, 2000000U / odr + 1, 10);
msleep(timeout);
}
/*
......
......@@ -544,6 +544,7 @@ config VCNL4000
config VCNL4035
tristate "VCNL4035 combined ALS and proximity sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
depends on I2C
......
......@@ -653,16 +653,11 @@ static int mt7621_pcie_init_virtual_bridges(struct mt7621_pcie *pcie)
return 0;
}
static int mt7621_pcie_request_resources(struct mt7621_pcie *pcie,
struct list_head *res)
static void mt7621_pcie_add_resources(struct mt7621_pcie *pcie,
struct list_head *res)
{
struct device *dev = pcie->dev;
pci_add_resource_offset(res, &pcie->io, pcie->offset.io);
pci_add_resource_offset(res, &pcie->mem, pcie->offset.mem);
pci_add_resource(res, &pcie->busn);
return devm_request_pci_bus_resources(dev, res);
}
static int mt7621_pcie_register_host(struct pci_host_bridge *host,
......@@ -738,11 +733,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
setup_cm_memory_region(pcie);
err = mt7621_pcie_request_resources(pcie, &res);
if (err) {
dev_err(dev, "Error requesting resources\n");
return err;
}
mt7621_pcie_add_resources(pcie, &res);
err = mt7621_pcie_register_host(bridge, &res);
if (err) {
......
......@@ -2,6 +2,7 @@
config DMA_RALINK
tristate "RALINK DMA support"
depends on RALINK && !SOC_RT288X
depends on DMADEVICES
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
......@@ -20,6 +20,7 @@ static const struct sdio_device_id sdio_ids[] = {
{ SDIO_DEVICE(0x024c, 0x0525), },
{ SDIO_DEVICE(0x024c, 0x0623), },
{ SDIO_DEVICE(0x024c, 0x0626), },
{ SDIO_DEVICE(0x024c, 0x0627), },
{ SDIO_DEVICE(0x024c, 0xb723), },
{ /* end: all zeroes */ },
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment