gpiolib: provide a dedicated function for setting lineinfo

We'll soon be filling out the gpioline_info structure in multiple
places. Add a separate function that given a gpio_desc sets all relevant
fields.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

drivers/gpio/gpiolib.c

@@ -1147,6 +1147,60 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 	return ret;
 }
 
+static void gpio_desc_to_lineinfo(struct gpio_desc *desc,
+				  struct gpioline_info *info)
+{
+	struct gpio_chip *chip = desc->gdev->chip;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	if (desc->name) {
+		strncpy(info->name, desc->name, sizeof(info->name));
+		info->name[sizeof(info->name) - 1] = '\0';
+	} else {
+		info->name[0] = '\0';
+	}
+
+	if (desc->label) {
+		strncpy(info->consumer, desc->label, sizeof(info->consumer));
+		info->consumer[sizeof(info->consumer) - 1] = '\0';
+	} else {
+		info->consumer[0] = '\0';
+	}
+
+	/*
+	 * Userspace only need to know that the kernel is using this GPIO so
+	 * it can't use it.
+	 */
+	info->flags = 0;
+	if (test_bit(FLAG_REQUESTED, &desc->flags) ||
+	    test_bit(FLAG_IS_HOGGED, &desc->flags) ||
+	    test_bit(FLAG_USED_AS_IRQ, &desc->flags) ||
+	    test_bit(FLAG_EXPORT, &desc->flags) ||
+	    test_bit(FLAG_SYSFS, &desc->flags) ||
+	    !pinctrl_gpio_can_use_line(chip->base + info->line_offset))
+		info->flags |= GPIOLINE_FLAG_KERNEL;
+	if (test_bit(FLAG_IS_OUT, &desc->flags))
+		info->flags |= GPIOLINE_FLAG_IS_OUT;
+	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+		info->flags |= GPIOLINE_FLAG_ACTIVE_LOW;
+	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
+		info->flags |= (GPIOLINE_FLAG_OPEN_DRAIN |
+				GPIOLINE_FLAG_IS_OUT);
+	if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
+		info->flags |= (GPIOLINE_FLAG_OPEN_SOURCE |
+				GPIOLINE_FLAG_IS_OUT);
+	if (test_bit(FLAG_BIAS_DISABLE, &desc->flags))
+		info->flags |= GPIOLINE_FLAG_BIAS_DISABLE;
+	if (test_bit(FLAG_PULL_DOWN, &desc->flags))
+		info->flags |= GPIOLINE_FLAG_BIAS_PULL_DOWN;
+	if (test_bit(FLAG_PULL_UP, &desc->flags))
+		info->flags |= GPIOLINE_FLAG_BIAS_PULL_UP;
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
 /*
  * gpio_ioctl() - ioctl handler for the GPIO chardev
  */
@@ -1187,49 +1241,7 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		if (IS_ERR(desc))
 			return PTR_ERR(desc);
 
-		if (desc->name) {
-			strncpy(lineinfo.name, desc->name,
-				sizeof(lineinfo.name));
-			lineinfo.name[sizeof(lineinfo.name)-1] = '\0';
-		} else {
-			lineinfo.name[0] = '\0';
-		}
-		if (desc->label) {
-			strncpy(lineinfo.consumer, desc->label,
-				sizeof(lineinfo.consumer));
-			lineinfo.consumer[sizeof(lineinfo.consumer)-1] = '\0';
-		} else {
-			lineinfo.consumer[0] = '\0';
-		}
-
-		/*
-		 * Userspace only need to know that the kernel is using
-		 * this GPIO so it can't use it.
-		 */
-		lineinfo.flags = 0;
-		if (test_bit(FLAG_REQUESTED, &desc->flags) ||
-		    test_bit(FLAG_IS_HOGGED, &desc->flags) ||
-		    test_bit(FLAG_USED_AS_IRQ, &desc->flags) ||
-		    test_bit(FLAG_EXPORT, &desc->flags) ||
-		    test_bit(FLAG_SYSFS, &desc->flags) ||
-		    !pinctrl_gpio_can_use_line(chip->base + lineinfo.line_offset))
-			lineinfo.flags |= GPIOLINE_FLAG_KERNEL;
-		if (test_bit(FLAG_IS_OUT, &desc->flags))
-			lineinfo.flags |= GPIOLINE_FLAG_IS_OUT;
-		if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
-			lineinfo.flags |= GPIOLINE_FLAG_ACTIVE_LOW;
-		if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
-			lineinfo.flags |= (GPIOLINE_FLAG_OPEN_DRAIN |
-					   GPIOLINE_FLAG_IS_OUT);
-		if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
-			lineinfo.flags |= (GPIOLINE_FLAG_OPEN_SOURCE |
-					   GPIOLINE_FLAG_IS_OUT);
-		if (test_bit(FLAG_BIAS_DISABLE, &desc->flags))
-			lineinfo.flags |= GPIOLINE_FLAG_BIAS_DISABLE;
-		if (test_bit(FLAG_PULL_DOWN, &desc->flags))
-			lineinfo.flags |= GPIOLINE_FLAG_BIAS_PULL_DOWN;
-		if (test_bit(FLAG_PULL_UP, &desc->flags))
-			lineinfo.flags |= GPIOLINE_FLAG_BIAS_PULL_UP;
+		gpio_desc_to_lineinfo(desc, &lineinfo);
 
 		if (copy_to_user(ip, &lineinfo, sizeof(lineinfo)))
 			return -EFAULT;