Commit d2c02da5 authored by Simon Wood's avatar Simon Wood Committed by Jiri Kosina

HID:hid-lg4ff: Switch autocentering off when strength is set to zero.

When the autocenter is set to zero, this patch issues a command to
totally disable the autocenter - this results in less resistance
in the wheel.
Reported-by: default avatarElias Vanderstuyft <elias.vds@gmail.com>
Signed-off-by: default avatarSimon Wood <simon@mungewell.org>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent f8c23156
...@@ -220,6 +220,20 @@ static void hid_lg4ff_set_autocenter_default(struct input_dev *dev, u16 magnitud ...@@ -220,6 +220,20 @@ static void hid_lg4ff_set_autocenter_default(struct input_dev *dev, u16 magnitud
__s32 *value = report->field[0]->value; __s32 *value = report->field[0]->value;
__u32 expand_a, expand_b; __u32 expand_a, expand_b;
/* De-activate Auto-Center */
if (magnitude == 0) {
value[0] = 0xf5;
value[1] = 0x00;
value[2] = 0x00;
value[3] = 0x00;
value[4] = 0x00;
value[5] = 0x00;
value[6] = 0x00;
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
return;
}
if (magnitude <= 0xaaaa) { if (magnitude <= 0xaaaa) {
expand_a = 0x0c * magnitude; expand_a = 0x0c * magnitude;
expand_b = 0x80 * magnitude; expand_b = 0x80 * magnitude;
...@@ -237,6 +251,17 @@ static void hid_lg4ff_set_autocenter_default(struct input_dev *dev, u16 magnitud ...@@ -237,6 +251,17 @@ static void hid_lg4ff_set_autocenter_default(struct input_dev *dev, u16 magnitud
value[6] = 0x00; value[6] = 0x00;
hid_hw_request(hid, report, HID_REQ_SET_REPORT); hid_hw_request(hid, report, HID_REQ_SET_REPORT);
/* Activate Auto-Center */
value[0] = 0x14;
value[1] = 0x00;
value[2] = 0x00;
value[3] = 0x00;
value[4] = 0x00;
value[5] = 0x00;
value[6] = 0x00;
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
} }
/* Sends autocentering command compatible with Formula Force EX */ /* Sends autocentering command compatible with Formula Force EX */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment