Commit d2f372ba authored by Nir Dotan's avatar Nir Dotan Committed by David S. Miller

mlxsw: pci: Increase PCI SW reset timeout

Spectrum-2 PHY layer introduces a calibration period which is a part of the
Spectrum-2 firmware boot process. Hence increase the SW timeout waiting for
the firmware to come out of boot. This does not increase system boot time
in cases where the firmware PHY calibration process is done quickly.

Fixes: c3ab4354 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Signed-off-by: default avatarNir Dotan <nird@mellanox.com>
Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c9ebea04
...@@ -27,7 +27,7 @@ ...@@ -27,7 +27,7 @@
#define MLXSW_PCI_SW_RESET 0xF0010 #define MLXSW_PCI_SW_RESET 0xF0010
#define MLXSW_PCI_SW_RESET_RST_BIT BIT(0) #define MLXSW_PCI_SW_RESET_RST_BIT BIT(0)
#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 5000 #define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 13000
#define MLXSW_PCI_SW_RESET_WAIT_MSECS 100 #define MLXSW_PCI_SW_RESET_WAIT_MSECS 100
#define MLXSW_PCI_FW_READY 0xA1844 #define MLXSW_PCI_FW_READY 0xA1844
#define MLXSW_PCI_FW_READY_MASK 0xFFFF #define MLXSW_PCI_FW_READY_MASK 0xFFFF
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment