Commit d2f3e9eb authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC low-priority fixes from Olof Johansson:
 "This branch contains a handful of fixes for various platforms that
  weren't serious enough to be included in late 3.11-rc releases.  Most
  of them are for minor cleanups and cosmetic fixes.

  There's also a bit of code removal here, one board file removal for
  clps711x, and removal of some legacy device creation on OMAP2+"

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
  ARM: OMAP2: use 'int' instead of 'unsigned' for variable 'gpmc_irq_start'
  ARM: OMAP2: remove useless variable 'ret'
  ARM: OMAP: dma: fix error return code in omap_system_dma_probe()
  ARM: OMAP2+: fix wrong address when loading PRM_FRAC_INCREMENTOR_DENUMERATOR_RELOAD
  ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards
  ARM: OMAP2: Use a consistent AM33XX SoC option description
  ARM: OMAP2+: Remove legacy device creation for McPDM and DMIC
  ARM: clps711x: edb7211: Remove extra iotable_init() call
  ARM: clps711x: autcpu12: Remove incorrect config checking
  ARM: clps711x: Drop fortunet board support
  ARM: clps711x: Remove the special name for the syscon driver
  ARM: dts: Fix memory node in skeleton64.dtsi
  ARM: Keystone: Convert device tree file to use IRQ defines
  ARM: keystone: use #include to include skeleton.dtsi
  ARM: keystone: Drop the un-necessary dsb from keystone_cpu_smc()
  ARM: Keystone: No need to preserve r12 across smc call
  ARM: keystone: remove redundant smp_init_cpus definition
  ARM: keystone: drop useless HAVE_SCHED_CLOCK
  ARM: dove: fix missing __init section of dove_mpp_gpio_mode
  ARM: shmobile: armadillo800eva-reference: fix compiler warning
  ...
parents 1bda20da 2bbc31ef
...@@ -55,12 +55,47 @@ __tmp_stack: ...@@ -55,12 +55,47 @@ __tmp_stack:
__continue: __continue:
#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */ #endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
/* Set board ID necessary for boot */ adr r0, dtb_info
ldr r7, 1f @ Set machine type register ldmia r0, {r1, r3, r4, r5, r7}
mov r8, #0 @ pass null pointer as atag
sub r0, r0, r1 @ calculate the delta offset
add r5, r5, r0 @ _edata
ldr lr, [r5, #0] @ check if valid DTB is present
cmp lr, r3
bne 0f
add r9, r7, #31 @ rounded up to a multiple
bic r9, r9, #31 @ ... of 32 bytes
add r6, r9, r5 @ copy from _edata
add r9, r9, r4 @ to MEMORY_START
1: ldmdb r6!, {r0 - r3, r10 - r12, lr}
cmp r6, r5
stmdb r9!, {r0 - r3, r10 - r12, lr}
bhi 1b
/* Success: Zero board ID, pointer to start of memory for atag/dtb */
mov r7, #0
mov r8, r4
b 2f b 2f
1 : .long MACH_TYPE .align 2
dtb_info:
.word dtb_info
#ifndef __ARMEB__
.word 0xedfe0dd0 @ sig is 0xd00dfeed big endian
#else
.word 0xd00dfeed
#endif
.word MEMORY_START
.word _edata
.word 0x4000 @ maximum DTB size
0:
/* Failure: Zero board ID, NULL atag/dtb */
mov r7, #0
mov r8, #0 @ pass null pointer as atag
2 : 2 :
#endif /* CONFIG_ZBOOT_ROM */ #endif /* CONFIG_ZBOOT_ROM */
...@@ -7,7 +7,9 @@ ...@@ -7,7 +7,9 @@
*/ */
/dts-v1/; /dts-v1/;
/include/ "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
/ { / {
model = "Texas Instruments Keystone 2 SoC"; model = "Texas Instruments Keystone 2 SoC";
...@@ -67,18 +69,23 @@ gic: interrupt-controller { ...@@ -67,18 +69,23 @@ gic: interrupt-controller {
timer { timer {
compatible = "arm,armv7-timer"; compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>, interrupts =
<1 14 0xf08>, <GIC_PPI 13
<1 11 0xf08>, (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<1 10 0x308>; <GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
}; };
pmu { pmu {
compatible = "arm,cortex-a15-pmu"; compatible = "arm,cortex-a15-pmu";
interrupts = <0 20 0xf01>, interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
<0 21 0xf01>, <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<0 22 0xf01>, <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
<0 23 0xf01>; <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
}; };
soc { soc {
...@@ -100,7 +107,7 @@ uart0: serial@02530c00 { ...@@ -100,7 +107,7 @@ uart0: serial@02530c00 {
reg-io-width = <4>; reg-io-width = <4>;
reg = <0x02530c00 0x100>; reg = <0x02530c00 0x100>;
clock-frequency = <133120000>; clock-frequency = <133120000>;
interrupts = <0 277 0xf01>; interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
}; };
uart1: serial@02531000 { uart1: serial@02531000 {
...@@ -110,7 +117,7 @@ uart1: serial@02531000 { ...@@ -110,7 +117,7 @@ uart1: serial@02531000 {
reg-io-width = <4>; reg-io-width = <4>;
reg = <0x02531000 0x100>; reg = <0x02531000 0x100>;
clock-frequency = <133120000>; clock-frequency = <133120000>;
interrupts = <0 280 0xf01>; interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
}; };
}; };
......
...@@ -9,5 +9,5 @@ / { ...@@ -9,5 +9,5 @@ / {
#size-cells = <2>; #size-cells = <2>;
chosen { }; chosen { };
aliases { }; aliases { };
memory { device_type = "memory"; reg = <0 0>; }; memory { device_type = "memory"; reg = <0 0 0 0>; };
}; };
...@@ -33,9 +33,6 @@ config ARCH_P720T ...@@ -33,9 +33,6 @@ config ARCH_P720T
Say Y here if you intend to run this kernel on the ARM Prospector Say Y here if you intend to run this kernel on the ARM Prospector
720T. 720T.
config ARCH_FORTUNET
bool "FORTUNET"
config EP72XX_ROM_BOOT config EP72XX_ROM_BOOT
bool "EP721x/EP731x ROM boot" bool "EP721x/EP731x ROM boot"
help help
......
...@@ -10,5 +10,4 @@ obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o ...@@ -10,5 +10,4 @@ obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o
obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o
obj-$(CONFIG_ARCH_CLEP7312) += board-clep7312.o obj-$(CONFIG_ARCH_CLEP7312) += board-clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += board-edb7211.o obj-$(CONFIG_ARCH_EDB7211) += board-edb7211.o
obj-$(CONFIG_ARCH_FORTUNET) += board-fortunet.o
obj-$(CONFIG_ARCH_P720T) += board-p720t.o obj-$(CONFIG_ARCH_P720T) += board-p720t.o
...@@ -259,11 +259,7 @@ static void __init autcpu12_init(void) ...@@ -259,11 +259,7 @@ static void __init autcpu12_init(void)
static void __init autcpu12_init_late(void) static void __init autcpu12_init_late(void)
{ {
gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios)); gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios));
platform_device_register(&autcpu12_nand_pdev);
if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) {
/* We are need both drivers to handle NAND */
platform_device_register(&autcpu12_nand_pdev);
}
} }
MACHINE_START(AUTCPU12, "autronix autcpu12") MACHINE_START(AUTCPU12, "autronix autcpu12")
......
...@@ -126,21 +126,6 @@ static struct gpio edb7211_gpios[] __initconst = { ...@@ -126,21 +126,6 @@ static struct gpio edb7211_gpios[] __initconst = {
{ EDB7211_LCDBL, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT" }, { EDB7211_LCDBL, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT" },
}; };
static struct map_desc edb7211_io_desc[] __initdata = {
{ /* Memory-mapped extra keyboard row */
.virtual = IO_ADDRESS(EDB7211_EXTKBD_BASE),
.pfn = __phys_to_pfn(EDB7211_EXTKBD_BASE),
.length = SZ_1M,
.type = MT_DEVICE,
},
};
void __init edb7211_map_io(void)
{
clps711x_map_io();
iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc));
}
/* Reserve screen memory region at the start of main system memory. */ /* Reserve screen memory region at the start of main system memory. */
static void __init edb7211_reserve(void) static void __init edb7211_reserve(void)
{ {
...@@ -195,7 +180,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") ...@@ -195,7 +180,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
.nr_irqs = CLPS711X_NR_IRQS, .nr_irqs = CLPS711X_NR_IRQS,
.fixup = fixup_edb7211, .fixup = fixup_edb7211,
.reserve = edb7211_reserve, .reserve = edb7211_reserve,
.map_io = edb7211_map_io, .map_io = clps711x_map_io,
.init_early = clps711x_init_early, .init_early = clps711x_init_early,
.init_irq = clps711x_init_irq, .init_irq = clps711x_init_irq,
.init_time = clps711x_timer_init, .init_time = clps711x_timer_init,
......
/*
* linux/arch/arm/mach-clps711x/fortunet.c
*
* Derived from linux/arch/arm/mach-integrator/arch.c
*
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/initrd.h>
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/memory.h>
#include "common.h"
struct meminfo memmap = {
.nr_banks = 1,
.bank = {
{
.start = 0xC0000000,
.size = 0x01000000,
},
},
};
typedef struct tag_IMAGE_PARAMS
{
int ramdisk_ok;
int ramdisk_address;
int ramdisk_size;
int ram_size;
int extra_param_type;
int extra_param_ptr;
int command_line;
} IMAGE_PARAMS;
#define IMAGE_PARAMS_PHYS 0xC01F0000
static void __init
fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
{
IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS);
*cmdline = phys_to_virt(ip->command_line);
#ifdef CONFIG_BLK_DEV_INITRD
if(ip->ramdisk_ok)
{
initrd_start = __phys_to_virt(ip->ramdisk_address);
initrd_end = initrd_start + ip->ramdisk_size;
}
#endif
memmap.bank[0].size = ip->ram_size;
*mi = memmap;
}
MACHINE_START(FORTUNET, "ARM-FortuNet")
/* Maintainer: FortuNet Inc. */
.nr_irqs = CLPS711X_NR_IRQS,
.fixup = fortunet_fixup,
.map_io = clps711x_map_io,
.init_early = clps711x_init_early,
.init_irq = clps711x_init_irq,
.init_time = clps711x_timer_init,
.handle_irq = clps711x_handle_irq,
.restart = clps711x_restart,
MACHINE_END
...@@ -57,7 +57,7 @@ static void __init clps711x_add_syscon(void) ...@@ -57,7 +57,7 @@ static void __init clps711x_add_syscon(void)
unsigned i; unsigned i;
for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++) for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++)
platform_device_register_simple("clps711x-syscon", i + 1, platform_device_register_simple("syscon", i + 1,
&clps711x_syscon_res[i], 1); &clps711x_syscon_res[i], 1);
} }
......
...@@ -47,7 +47,7 @@ static const struct dove_mpp_grp dove_mpp_grp[] = { ...@@ -47,7 +47,7 @@ static const struct dove_mpp_grp dove_mpp_grp[] = {
/* Enable gpio for a range of pins. mode should be a combination of /* Enable gpio for a range of pins. mode should be a combination of
GPIO_OUTPUT_OK | GPIO_INPUT_OK */ GPIO_OUTPUT_OK | GPIO_INPUT_OK */
static void dove_mpp_gpio_mode(int start, int end, int gpio_mode) static void __init dove_mpp_gpio_mode(int start, int end, int gpio_mode)
{ {
int i; int i;
......
...@@ -7,7 +7,6 @@ config ARCH_KEYSTONE ...@@ -7,7 +7,6 @@ config ARCH_KEYSTONE
select HAVE_SMP select HAVE_SMP
select CLKSRC_MMIO select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
select HAVE_SCHED_CLOCK
select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_ERRATA_798181 if SMP select ARM_ERRATA_798181 if SMP
help help
......
...@@ -38,6 +38,5 @@ static int keystone_smp_boot_secondary(unsigned int cpu, ...@@ -38,6 +38,5 @@ static int keystone_smp_boot_secondary(unsigned int cpu,
} }
struct smp_operations keystone_smp_ops __initdata = { struct smp_operations keystone_smp_ops __initdata = {
.smp_init_cpus = arm_dt_init_cpu_maps,
.smp_boot_secondary = keystone_smp_boot_secondary, .smp_boot_secondary = keystone_smp_boot_secondary,
}; };
...@@ -22,8 +22,7 @@ ...@@ -22,8 +22,7 @@
* Return: Non zero value on failure * Return: Non zero value on failure
*/ */
ENTRY(keystone_cpu_smc) ENTRY(keystone_cpu_smc)
stmfd sp!, {r4-r12, lr} stmfd sp!, {r4-r11, lr}
smc #0 smc #0
dsb ldmfd sp!, {r4-r11, pc}
ldmfd sp!, {r4-r12, pc}
ENDPROC(keystone_cpu_smc) ENDPROC(keystone_cpu_smc)
...@@ -65,7 +65,7 @@ config SOC_OMAP5 ...@@ -65,7 +65,7 @@ config SOC_OMAP5
select ARM_ERRATA_798181 if SMP select ARM_ERRATA_798181 if SMP
config SOC_AM33XX config SOC_AM33XX
bool "AM33XX support" bool "TI AM33XX"
depends on ARCH_MULTI_V7 depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM select ARM_CPU_SUSPEND if PM
......
...@@ -24,8 +24,8 @@ void am33xx_restart(enum reboot_mode mode, const char *cmd) ...@@ -24,8 +24,8 @@ void am33xx_restart(enum reboot_mode mode, const char *cmd)
{ {
/* TODO: Handle mode and cmd if necessary */ /* TODO: Handle mode and cmd if necessary */
am33xx_prm_rmw_reg_bits(AM33XX_GLOBAL_WARM_SW_RST_MASK, am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK,
AM33XX_GLOBAL_WARM_SW_RST_MASK, AM33XX_RST_GLOBAL_WARM_SW_MASK,
AM33XX_PRM_DEVICE_MOD, AM33XX_PRM_DEVICE_MOD,
AM33XX_PRM_RSTCTRL_OFFSET); AM33XX_PRM_RSTCTRL_OFFSET);
......
...@@ -110,8 +110,6 @@ static void __init am3517_crane_i2c_init(void) ...@@ -110,8 +110,6 @@ static void __init am3517_crane_i2c_init(void)
static void __init am3517_crane_init(void) static void __init am3517_crane_init(void)
{ {
int ret;
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init(); omap_serial_init();
omap_sdrc_init(NULL, NULL); omap_sdrc_init(NULL, NULL);
......
...@@ -327,44 +327,6 @@ static void omap_init_audio(void) ...@@ -327,44 +327,6 @@ static void omap_init_audio(void)
static inline void omap_init_audio(void) {} static inline void omap_init_audio(void) {}
#endif #endif
#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
static void __init omap_init_mcpdm(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
oh = omap_hwmod_lookup("mcpdm");
if (!oh)
return;
pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n");
}
#else
static inline void omap_init_mcpdm(void) {}
#endif
#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \
defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE)
static void __init omap_init_dmic(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
oh = omap_hwmod_lookup("dmic");
if (!oh)
return;
pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n");
}
#else
static inline void omap_init_dmic(void) {}
#endif
#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \ #if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE) defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
...@@ -565,8 +527,6 @@ static int __init omap2_init_devices(void) ...@@ -565,8 +527,6 @@ static int __init omap2_init_devices(void)
omap_init_mbox(); omap_init_mbox();
/* If dtb is there, the devices will be created dynamically */ /* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) { if (!of_have_populated_dt()) {
omap_init_dmic();
omap_init_mcpdm();
omap_init_mcspi(); omap_init_mcspi();
omap_init_sham(); omap_init_sham();
omap_init_aes(); omap_init_aes();
......
...@@ -149,7 +149,7 @@ struct omap3_gpmc_regs { ...@@ -149,7 +149,7 @@ struct omap3_gpmc_regs {
static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ]; static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
static struct irq_chip gpmc_irq_chip; static struct irq_chip gpmc_irq_chip;
static unsigned gpmc_irq_start; static int gpmc_irq_start;
static struct resource gpmc_mem_root; static struct resource gpmc_mem_root;
static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static struct resource gpmc_cs_mem[GPMC_CS_NUM];
......
...@@ -537,7 +537,7 @@ static void __init realtime_counter_init(void) ...@@ -537,7 +537,7 @@ static void __init realtime_counter_init(void)
reg |= num; reg |= num;
__raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET); __raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET);
reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) & reg = __raw_readl(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) &
NUMERATOR_DENUMERATOR_MASK; NUMERATOR_DENUMERATOR_MASK;
reg |= den; reg |= den;
__raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); __raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
......
...@@ -190,10 +190,10 @@ static void __init eva_init(void) ...@@ -190,10 +190,10 @@ static void __init eva_init(void)
} }
#define RESCNT2 IOMEM(0xe6188020) #define RESCNT2 IOMEM(0xe6188020)
static void eva_restart(char mode, const char *cmd) static void eva_restart(enum reboot_mode mode, const char *cmd)
{ {
/* Do soft power on reset */ /* Do soft power on reset */
writel((1 << 31), RESCNT2); writel(1 << 31, RESCNT2);
} }
static const char *eva_boards_compat_dt[] __initdata = { static const char *eva_boards_compat_dt[] __initdata = {
......
...@@ -596,7 +596,7 @@ static struct clk_lookup lookups[] = { ...@@ -596,7 +596,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]),
CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]),
CLKDEV_DEV_ID("renesas_tpu_pwm", &mstp_clks[MSTP304]), CLKDEV_DEV_ID("renesas-tpu-pwm", &mstp_clks[MSTP304]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]),
CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]), CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]),
......
...@@ -37,13 +37,15 @@ ENTRY(shmobile_boot_scu) ...@@ -37,13 +37,15 @@ ENTRY(shmobile_boot_scu)
lsl r1, r1, #3 @ we will shift by cpu_id * 8 bits lsl r1, r1, #3 @ we will shift by cpu_id * 8 bits
ldr r2, [r0, #8] @ SCU Power Status Register ldr r2, [r0, #8] @ SCU Power Status Register
mov r3, #3 mov r3, #3
bic r2, r2, r3, lsl r1 @ Clear bits of our CPU (Run Mode) lsl r3, r3, r1
bic r2, r2, r3 @ Clear bits of our CPU (Run Mode)
str r2, [r0, #8] @ write back str r2, [r0, #8] @ write back
b shmobile_invalidate_start b shmobile_invalidate_start
ENDPROC(shmobile_boot_scu) ENDPROC(shmobile_boot_scu)
.text .text
.align 2
.globl shmobile_scu_base .globl shmobile_scu_base
shmobile_scu_base: shmobile_scu_base:
.space 4 .space 4
...@@ -24,12 +24,16 @@ ENDPROC(shmobile_invalidate_start) ...@@ -24,12 +24,16 @@ ENDPROC(shmobile_invalidate_start)
* This will be mapped at address 0 by SBAR register. * This will be mapped at address 0 by SBAR register.
* We need _long_ jump to the physical address. * We need _long_ jump to the physical address.
*/ */
.arm
.align 12 .align 12
ENTRY(shmobile_boot_vector) ENTRY(shmobile_boot_vector)
ldr r0, 2f ldr r0, 2f
ldr pc, 1f ldr r1, 1f
bx r1
ENDPROC(shmobile_boot_vector) ENDPROC(shmobile_boot_vector)
.align 2
.globl shmobile_boot_fn .globl shmobile_boot_fn
shmobile_boot_fn: shmobile_boot_fn:
1: .space 4 1: .space 4
......
#ifndef ZBOOT_H #ifndef ZBOOT_H
#define ZBOOT_H #define ZBOOT_H
#include <asm/mach-types.h>
#include <mach/zboot_macros.h> #include <mach/zboot_macros.h>
/************************************************** /**************************************************
...@@ -11,7 +10,6 @@ ...@@ -11,7 +10,6 @@
**************************************************/ **************************************************/
#ifdef CONFIG_MACH_MACKEREL #ifdef CONFIG_MACH_MACKEREL
#define MACH_TYPE MACH_TYPE_MACKEREL
#define MEMORY_START 0x40000000 #define MEMORY_START 0x40000000
#include "mach/head-mackerel.txt" #include "mach/head-mackerel.txt"
#else #else
......
...@@ -41,6 +41,7 @@ ...@@ -41,6 +41,7 @@
sh7372_resume_core_standby_sysc: sh7372_resume_core_standby_sysc:
ldr pc, 1f ldr pc, 1f
.align 2
.globl sh7372_cpu_resume .globl sh7372_cpu_resume
sh7372_cpu_resume: sh7372_cpu_resume:
1: .space 4 1: .space 4
...@@ -96,6 +97,7 @@ sh7372_do_idle_sysc: ...@@ -96,6 +97,7 @@ sh7372_do_idle_sysc:
1: 1:
b 1b b 1b
.align 2
kernel_flush: kernel_flush:
.word v7_flush_dcache_all .word v7_flush_dcache_all
#endif #endif
...@@ -2083,6 +2083,7 @@ static int omap_system_dma_probe(struct platform_device *pdev) ...@@ -2083,6 +2083,7 @@ static int omap_system_dma_probe(struct platform_device *pdev)
dma_irq = platform_get_irq_byname(pdev, irq_name); dma_irq = platform_get_irq_byname(pdev, irq_name);
if (dma_irq < 0) { if (dma_irq < 0) {
dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq); dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
ret = dma_irq;
goto exit_dma_lch_fail; goto exit_dma_lch_fail;
} }
ret = setup_irq(dma_irq, &omap24xx_dma_irq); ret = setup_irq(dma_irq, &omap24xx_dma_irq);
......
...@@ -159,9 +159,6 @@ static int syscon_probe(struct platform_device *pdev) ...@@ -159,9 +159,6 @@ static int syscon_probe(struct platform_device *pdev)
static const struct platform_device_id syscon_ids[] = { static const struct platform_device_id syscon_ids[] = {
{ "syscon", }, { "syscon", },
#ifdef CONFIG_ARCH_CLPS711X
{ "clps711x-syscon", },
#endif
{ } { }
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment