drm/i915: move module parameters into a struct, in a new file

With 20+ module parameters, I think referring to them via a struct
improves clarity over just having a bunch of globals. While at it, move
the parameter initialization and definitions into a new file
i915_params.c to reduce clutter in i915_drv.c.

Apart from the ill-named i915_enable_rc6, i915_enable_fbc and
i915_enable_ppgtt parameters, for which we lose the "i915_" prefix
internally, the module parameters now look the same both on the kernel
command line and in code. For example, "i915.modeset".

The downsides of the change are losing static on a couple of variables
and not having the initialization and module_param_named() right next to
each other. On the other hand, all module parameters are now defined in
one place at i915_params.c. Plus you can do this to find all module
parameter references:

$ git grep "i915\." -- drivers/gpu/drm/i915

v2:
- move the definitions into a new file
- s/i915_params/i915/
- make i915_try_reset i915.reset, for consistency
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/Makefile

@@ -14,6 +14,7 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o \
 	  i915_gem_gtt.o \
 	  i915_gem_stolen.o \
 	  i915_gem_tiling.o \
+	  i915_params.o \
 	  i915_sysfs.o \
 	  i915_trace_points.o \
 	  i915_ums.o \

drivers/gpu/drm/i915/i915_drv.c

@@ -38,120 +38,6 @@
 #include <linux/module.h>
 #include <drm/drm_crtc_helper.h>
 
-static int i915_modeset __read_mostly = -1;
-module_param_named(modeset, i915_modeset, int, 0400);
-MODULE_PARM_DESC(modeset,
-		"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
-		"1=on, -1=force vga console preference [default])");
-
-int i915_panel_ignore_lid __read_mostly = 1;
-module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
-MODULE_PARM_DESC(panel_ignore_lid,
-		"Override lid status (0=autodetect, 1=autodetect disabled [default], "
-		"-1=force lid closed, -2=force lid open)");
-
-unsigned int i915_powersave __read_mostly = 1;
-module_param_named(powersave, i915_powersave, int, 0600);
-MODULE_PARM_DESC(powersave,
-		"Enable powersavings, fbc, downclocking, etc. (default: true)");
-
-int i915_semaphores __read_mostly = -1;
-module_param_named(semaphores, i915_semaphores, int, 0400);
-MODULE_PARM_DESC(semaphores,
-		"Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
-
-int i915_enable_rc6 __read_mostly = -1;
-module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
-MODULE_PARM_DESC(i915_enable_rc6,
-		"Enable power-saving render C-state 6. "
-		"Different stages can be selected via bitmask values "
-		"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
-		"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
-		"default: -1 (use per-chip default)");
-
-int i915_enable_fbc __read_mostly = -1;
-module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
-MODULE_PARM_DESC(i915_enable_fbc,
-		"Enable frame buffer compression for power savings "
-		"(default: -1 (use per-chip default))");
-
-unsigned int i915_lvds_downclock __read_mostly = 0;
-module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
-MODULE_PARM_DESC(lvds_downclock,
-		"Use panel (LVDS/eDP) downclocking for power savings "
-		"(default: false)");
-
-int i915_lvds_channel_mode __read_mostly;
-module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
-MODULE_PARM_DESC(lvds_channel_mode,
-		 "Specify LVDS channel mode "
-		 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
-
-int i915_panel_use_ssc __read_mostly = -1;
-module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
-MODULE_PARM_DESC(lvds_use_ssc,
-		"Use Spread Spectrum Clock with panels [LVDS/eDP] "
-		"(default: auto from VBT)");
-
-int i915_vbt_sdvo_panel_type __read_mostly = -1;
-module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
-MODULE_PARM_DESC(vbt_sdvo_panel_type,
-		"Override/Ignore selection of SDVO panel mode in the VBT "
-		"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
-
-static bool i915_try_reset __read_mostly = true;
-module_param_named(reset, i915_try_reset, bool, 0600);
-MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
-
-bool i915_enable_hangcheck __read_mostly = true;
-module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
-MODULE_PARM_DESC(enable_hangcheck,
-		"Periodically check GPU activity for detecting hangs. "
-		"WARNING: Disabling this can cause system wide hangs. "
-		"(default: true)");
-
-int i915_enable_ppgtt __read_mostly = -1;
-module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0400);
-MODULE_PARM_DESC(i915_enable_ppgtt,
-		"Override PPGTT usage. "
-		"(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
-
-int i915_enable_psr __read_mostly = 0;
-module_param_named(enable_psr, i915_enable_psr, int, 0600);
-MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
-
-unsigned int i915_preliminary_hw_support __read_mostly = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT);
-module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600);
-MODULE_PARM_DESC(preliminary_hw_support,
-		"Enable preliminary hardware support.");
-
-int i915_disable_power_well __read_mostly = 1;
-module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
-MODULE_PARM_DESC(disable_power_well,
-		 "Disable the power well when possible (default: true)");
-
-int i915_enable_ips __read_mostly = 1;
-module_param_named(enable_ips, i915_enable_ips, int, 0600);
-MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
-
-bool i915_fastboot __read_mostly = 0;
-module_param_named(fastboot, i915_fastboot, bool, 0600);
-MODULE_PARM_DESC(fastboot, "Try to skip unnecessary mode sets at boot time "
-		 "(default: false)");
-
-int i915_enable_pc8 __read_mostly = 1;
-module_param_named(enable_pc8, i915_enable_pc8, int, 0600);
-MODULE_PARM_DESC(enable_pc8, "Enable support for low power package C states (PC8+) (default: true)");
-
-int i915_pc8_timeout __read_mostly = 5000;
-module_param_named(pc8_timeout, i915_pc8_timeout, int, 0600);
-MODULE_PARM_DESC(pc8_timeout, "Number of msecs of idleness required to enter PC8+ (default: 5000)");
-
-bool i915_prefault_disable __read_mostly;
-module_param_named(prefault_disable, i915_prefault_disable, bool, 0600);
-MODULE_PARM_DESC(prefault_disable,
-		"Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only.");
-
 static struct drm_driver driver;
 
 static const struct intel_device_info intel_i830_info = {
@@ -480,12 +366,12 @@ bool i915_semaphore_is_enabled(struct drm_device *dev)
 
 	/* Until we get further testing... */
 	if (IS_GEN8(dev)) {
-		WARN_ON(!i915_preliminary_hw_support);
+		WARN_ON(!i915.preliminary_hw_support);
 		return false;
 	}
 
-	if (i915_semaphores >= 0)
-		return i915_semaphores;
+	if (i915.semaphores >= 0)
+		return i915.semaphores;
 
 #ifdef CONFIG_INTEL_IOMMU
 	/* Enable semaphores on SNB when IO remapping is off */
@@ -750,7 +636,7 @@ int i915_reset(struct drm_device *dev)
 	bool simulated;
 	int ret;
 
-	if (!i915_try_reset)
+	if (!i915.reset)
 		return 0;
 
 	mutex_lock(&dev->struct_mutex);
@@ -818,7 +704,7 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct intel_device_info *intel_info =
 		(struct intel_device_info *) ent->driver_data;
 
-	if (IS_PRELIMINARY_HW(intel_info) && !i915_preliminary_hw_support) {
+	if (IS_PRELIMINARY_HW(intel_info) && !i915.preliminary_hw_support) {
 		DRM_INFO("This hardware requires preliminary hardware support.\n"
 			 "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
 		return -ENODEV;
@@ -1049,14 +935,14 @@ static int __init i915_init(void)
 	 * the default behavior.
 	 */
 #if defined(CONFIG_DRM_I915_KMS)
-	if (i915_modeset != 0)
+	if (i915.modeset != 0)
 		driver.driver_features |= DRIVER_MODESET;
 #endif
-	if (i915_modeset == 1)
+	if (i915.modeset == 1)
 		driver.driver_features |= DRIVER_MODESET;
 
 #ifdef CONFIG_VGA_CONSOLE
-	if (vgacon_text_force() && i915_modeset == -1)
+	if (vgacon_text_force() && i915.modeset == -1)
 		driver.driver_features &= ~DRIVER_MODESET;
 #endif
 

drivers/gpu/drm/i915/i915_drv.h

@@ -1891,31 +1891,39 @@ struct drm_i915_file_private {
 
 extern const struct drm_ioctl_desc i915_ioctls[];
 extern int i915_max_ioctl;
-extern int i915_panel_ignore_lid __read_mostly;
-extern unsigned int i915_powersave __read_mostly;
-extern int i915_semaphores __read_mostly;
-extern unsigned int i915_lvds_downclock __read_mostly;
-extern int i915_lvds_channel_mode __read_mostly;
-extern int i915_panel_use_ssc __read_mostly;
-extern int i915_vbt_sdvo_panel_type __read_mostly;
-extern int i915_enable_rc6 __read_mostly;
-extern int i915_enable_fbc __read_mostly;
-extern bool i915_enable_hangcheck __read_mostly;
-extern int i915_enable_ppgtt __read_mostly;
-extern int i915_enable_psr __read_mostly;
-extern unsigned int i915_preliminary_hw_support __read_mostly;
-extern int i915_disable_power_well __read_mostly;
-extern int i915_enable_ips __read_mostly;
-extern bool i915_fastboot __read_mostly;
-extern int i915_enable_pc8 __read_mostly;
-extern int i915_pc8_timeout __read_mostly;
-extern bool i915_prefault_disable __read_mostly;
 
 extern int i915_suspend(struct drm_device *dev, pm_message_t state);
 extern int i915_resume(struct drm_device *dev);
 extern int i915_master_create(struct drm_device *dev, struct drm_master *master);
 extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master);
 
+/* i915_params.c */
+struct i915_params {
+	int modeset;
+	int panel_ignore_lid;
+	unsigned int powersave;
+	int semaphores;
+	unsigned int lvds_downclock;
+	int lvds_channel_mode;
+	int panel_use_ssc;
+	int vbt_sdvo_panel_type;
+	int enable_rc6;
+	int enable_fbc;
+	bool enable_hangcheck;
+	int enable_ppgtt;
+	int enable_psr;
+	unsigned int preliminary_hw_support;
+	int disable_power_well;
+	int enable_ips;
+	bool fastboot;
+	int enable_pc8;
+	int pc8_timeout;
+	bool prefault_disable;
+	bool reset;
+	int invert_brightness;
+};
+extern struct i915_params i915 __read_mostly;
+
 				/* i915_dma.c */
 void i915_update_dri1_breadcrumb(struct drm_device *dev);
 extern void i915_kernel_lost_context(struct drm_device * dev);
@@ -2295,10 +2303,10 @@ static inline void i915_gem_chipset_flush(struct drm_device *dev)
 int i915_gem_init_ppgtt(struct drm_device *dev, struct i915_hw_ppgtt *ppgtt);
 static inline bool intel_enable_ppgtt(struct drm_device *dev, bool full)
 {
-	if (i915_enable_ppgtt == 0 || !HAS_ALIASING_PPGTT(dev))
+	if (i915.enable_ppgtt == 0 || !HAS_ALIASING_PPGTT(dev))
 		return false;
 
-	if (i915_enable_ppgtt == 1 && full)
+	if (i915.enable_ppgtt == 1 && full)
 		return false;
 
 #ifdef CONFIG_INTEL_IOMMU

drivers/gpu/drm/i915/i915_gem.c

@@ -476,7 +476,7 @@ i915_gem_shmem_pread(struct drm_device *dev,
 
 		mutex_unlock(&dev->struct_mutex);
 
-		if (likely(!i915_prefault_disable) && !prefaulted) {
+		if (likely(!i915.prefault_disable) && !prefaulted) {
 			ret = fault_in_multipages_writeable(user_data, remain);
 			/* Userspace is tricking us, but we've already clobbered
 			 * its pages with the prefault and promised to write the
@@ -868,7 +868,7 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 		       args->size))
 		return -EFAULT;
 
-	if (likely(!i915_prefault_disable)) {
+	if (likely(!i915.prefault_disable)) {
 		ret = fault_in_multipages_readable(to_user_ptr(args->data_ptr),
 						   args->size);
 		if (ret)

drivers/gpu/drm/i915/i915_gem_execbuffer.c

@@ -896,7 +896,7 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec,
 		if (!access_ok(VERIFY_WRITE, ptr, length))
 			return -EFAULT;
 
-		if (likely(!i915_prefault_disable)) {
+		if (likely(!i915.prefault_disable)) {
 			if (fault_in_multipages_readable(ptr, length))
 				return -EFAULT;
 		}

drivers/gpu/drm/i915/i915_gem_gtt.c

@@ -1542,7 +1542,7 @@ static inline unsigned int gen8_get_total_gtt_size(u16 bdw_gmch_ctl)
 	if (bdw_gmch_ctl)
 		bdw_gmch_ctl = 1 << bdw_gmch_ctl;
 	if (bdw_gmch_ctl > 4) {
-		WARN_ON(!i915_preliminary_hw_support);
+		WARN_ON(!i915.preliminary_hw_support);
 		return 4<<20;
 	}
 

drivers/gpu/drm/i915/i915_irq.c

@@ -2495,7 +2495,7 @@ static void i915_hangcheck_elapsed(unsigned long data)
 #define HUNG 20
 #define FIRE 30
 
-	if (!i915_enable_hangcheck)
+	if (!i915.enable_hangcheck)
 		return;
 
 	for_each_ring(ring, dev_priv, i) {
@@ -2597,7 +2597,7 @@ static void i915_hangcheck_elapsed(unsigned long data)
 void i915_queue_hangcheck(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	if (!i915_enable_hangcheck)
+	if (!i915.enable_hangcheck)
 		return;
 
 	mod_timer(&dev_priv->gpu_error.hangcheck_timer,

drivers/gpu/drm/i915/i915_params.c

+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include "i915_drv.h"
+
+struct i915_params i915 __read_mostly = {
+	.modeset = -1,
+	.panel_ignore_lid = 1,
+	.powersave = 1,
+	.semaphores = -1,
+	.lvds_downclock = 0,
+	.lvds_channel_mode = 0,
+	.panel_use_ssc = -1,
+	.vbt_sdvo_panel_type = -1,
+	.enable_rc6 = -1,
+	.enable_fbc = -1,
+	.enable_hangcheck = true,
+	.enable_ppgtt = -1,
+	.enable_psr = 0,
+	.preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
+	.disable_power_well = 1,
+	.enable_ips = 1,
+	.fastboot = 0,
+	.enable_pc8 = 1,
+	.pc8_timeout = 5000,
+	.prefault_disable = 0,
+	.reset = true,
+	.invert_brightness = 0,
+};
+
+module_param_named(modeset, i915.modeset, int, 0400);
+MODULE_PARM_DESC(modeset,
+	"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
+	"1=on, -1=force vga console preference [default])");
+
+module_param_named(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
+MODULE_PARM_DESC(panel_ignore_lid,
+	"Override lid status (0=autodetect, 1=autodetect disabled [default], "
+	"-1=force lid closed, -2=force lid open)");
+
+module_param_named(powersave, i915.powersave, int, 0600);
+MODULE_PARM_DESC(powersave,
+	"Enable powersavings, fbc, downclocking, etc. (default: true)");
+
+module_param_named(semaphores, i915.semaphores, int, 0400);
+MODULE_PARM_DESC(semaphores,
+	"Use semaphores for inter-ring sync "
+	"(default: -1 (use per-chip defaults))");
+
+module_param_named(i915_enable_rc6, i915.enable_rc6, int, 0400);
+MODULE_PARM_DESC(i915_enable_rc6,
+	"Enable power-saving render C-state 6. "
+	"Different stages can be selected via bitmask values "
+	"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
+	"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
+	"default: -1 (use per-chip default)");
+
+module_param_named(i915_enable_fbc, i915.enable_fbc, int, 0600);
+MODULE_PARM_DESC(i915_enable_fbc,
+	"Enable frame buffer compression for power savings "
+	"(default: -1 (use per-chip default))");
+
+module_param_named(lvds_downclock, i915.lvds_downclock, int, 0400);
+MODULE_PARM_DESC(lvds_downclock,
+	"Use panel (LVDS/eDP) downclocking for power savings "
+	"(default: false)");
+
+module_param_named(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
+MODULE_PARM_DESC(lvds_channel_mode,
+	 "Specify LVDS channel mode "
+	 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
+
+module_param_named(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
+MODULE_PARM_DESC(lvds_use_ssc,
+	"Use Spread Spectrum Clock with panels [LVDS/eDP] "
+	"(default: auto from VBT)");
+
+module_param_named(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
+MODULE_PARM_DESC(vbt_sdvo_panel_type,
+	"Override/Ignore selection of SDVO panel mode in the VBT "
+	"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
+
+module_param_named(reset, i915.reset, bool, 0600);
+MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
+
+module_param_named(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
+MODULE_PARM_DESC(enable_hangcheck,
+	"Periodically check GPU activity for detecting hangs. "
+	"WARNING: Disabling this can cause system wide hangs. "
+	"(default: true)");
+
+module_param_named(i915_enable_ppgtt, i915.enable_ppgtt, int, 0400);
+MODULE_PARM_DESC(i915_enable_ppgtt,
+	"Override PPGTT usage. "
+	"(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
+
+module_param_named(enable_psr, i915.enable_psr, int, 0600);
+MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
+
+module_param_named(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
+MODULE_PARM_DESC(preliminary_hw_support,
+	"Enable preliminary hardware support.");
+
+module_param_named(disable_power_well, i915.disable_power_well, int, 0600);
+MODULE_PARM_DESC(disable_power_well,
+	"Disable the power well when possible (default: true)");
+
+module_param_named(enable_ips, i915.enable_ips, int, 0600);
+MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
+
+module_param_named(fastboot, i915.fastboot, bool, 0600);
+MODULE_PARM_DESC(fastboot,
+	"Try to skip unnecessary mode sets at boot time (default: false)");
+
+module_param_named(enable_pc8, i915.enable_pc8, int, 0600);
+MODULE_PARM_DESC(enable_pc8,
+	"Enable support for low power package C states (PC8+) (default: true)");
+
+module_param_named(pc8_timeout, i915.pc8_timeout, int, 0600);
+MODULE_PARM_DESC(pc8_timeout,
+	"Number of msecs of idleness required to enter PC8+ (default: 5000)");
+
+module_param_named(prefault_disable, i915.prefault_disable, bool, 0600);
+MODULE_PARM_DESC(prefault_disable,
+	"Disable page prefaulting for pread/pwrite/reloc (default:false). "
+	"For developers only.");
+
+module_param_named(invert_brightness, i915.invert_brightness, int, 0600);
+MODULE_PARM_DESC(invert_brightness,
+	"Invert backlight brightness "
+	"(-1 force normal, 0 machine defaults, 1 force inversion), please "
+	"report PCI device ID, subsystem vendor and subsystem device ID "
+	"to dri-devel@lists.freedesktop.org, if your machine needs it. "
+	"It will then be included in an upcoming module version.");

drivers/gpu/drm/i915/intel_bios.c

@@ -259,7 +259,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
 			downclock = dvo_timing->clock;
 	}
 
-	if (downclock < panel_dvo_timing->clock && i915_lvds_downclock) {
+	if (downclock < panel_dvo_timing->clock && i915.lvds_downclock) {
 		dev_priv->lvds_downclock_avail = 1;
 		dev_priv->lvds_downclock = downclock * 10;
 		DRM_DEBUG_KMS("LVDS downclock is found in VBT. "
@@ -318,7 +318,7 @@ parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
 	struct drm_display_mode *panel_fixed_mode;
 	int index;
 
-	index = i915_vbt_sdvo_panel_type;
+	index = i915.vbt_sdvo_panel_type;
 	if (index == -2) {
 		DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n");
 		return;

drivers/gpu/drm/i915/intel_display.c

@@ -2372,7 +2372,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	 * whether the platform allows pfit disable with pipe active, and only
 	 * then update the pipesrc and pfit state, even on the flip path.
 	 */
-	if (i915_fastboot) {
+	if (i915.fastboot) {
 		const struct drm_display_mode *adjusted_mode =
 			&intel_crtc->config.adjusted_mode;
 
@@ -4580,7 +4580,7 @@ static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
 static void hsw_compute_ips_config(struct intel_crtc *crtc,
 				   struct intel_crtc_config *pipe_config)
 {
-	pipe_config->ips_enabled = i915_enable_ips &&
+	pipe_config->ips_enabled = i915.enable_ips &&
 				   hsw_crtc_supports_ips(crtc) &&
 				   pipe_config->pipe_bpp <= 24;
 }
@@ -4781,8 +4781,8 @@ intel_link_compute_m_n(int bits_per_pixel, int nlanes,
 
 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
 {
-	if (i915_panel_use_ssc >= 0)
-		return i915_panel_use_ssc != 0;
+	if (i915.panel_use_ssc >= 0)
+		return i915.panel_use_ssc != 0;
 	return dev_priv->vbt.lvds_use_ssc
 		&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
 }
@@ -4841,7 +4841,7 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
 
 	crtc->lowfreq_avail = false;
 	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
-	    reduced_clock && i915_powersave) {
+	    reduced_clock && i915.powersave) {
 		I915_WRITE(FP1(pipe), fp2);
 		crtc->config.dpll_hw_state.fp1 = fp2;
 		crtc->lowfreq_avail = true;
@@ -6345,7 +6345,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	if (intel_crtc->config.has_dp_encoder)
 		intel_dp_set_m_n(intel_crtc);
 
-	if (is_lvds && has_reduced_clock && i915_powersave)
+	if (is_lvds && has_reduced_clock && i915.powersave)
 		intel_crtc->lowfreq_avail = true;
 	else
 		intel_crtc->lowfreq_avail = false;
@@ -6713,7 +6713,7 @@ static void __hsw_enable_package_c8(struct drm_i915_private *dev_priv)
 		return;
 
 	schedule_delayed_work(&dev_priv->pc8.enable_work,
-			      msecs_to_jiffies(i915_pc8_timeout));
+			      msecs_to_jiffies(i915.pc8_timeout));
 }
 
 static void __hsw_disable_package_c8(struct drm_i915_private *dev_priv)
@@ -6812,7 +6812,7 @@ static void hsw_update_package_c8(struct drm_device *dev)
 	if (!HAS_PC8(dev_priv->dev))
 		return;
 
-	if (!i915_enable_pc8)
+	if (!i915.enable_pc8)
 		return;
 
 	mutex_lock(&dev_priv->pc8.lock);
@@ -8210,7 +8210,7 @@ void intel_mark_idle(struct drm_device *dev)
 
 	hsw_package_c8_gpu_idle(dev_priv);
 
-	if (!i915_powersave)
+	if (!i915.powersave)
 		return;
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
@@ -8230,7 +8230,7 @@ void intel_mark_fb_busy(struct drm_i915_gem_object *obj,
 	struct drm_device *dev = obj->base.dev;
 	struct drm_crtc *crtc;
 
-	if (!i915_powersave)
+	if (!i915.powersave)
 		return;
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
@@ -9893,7 +9893,7 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
 			struct intel_crtc *intel_crtc =
 				to_intel_crtc(set->crtc);
 
-			if (intel_crtc->active && i915_fastboot) {
+			if (intel_crtc->active && i915.fastboot) {
 				DRM_DEBUG_KMS("crtc has no fb, will flip\n");
 				config->fb_changed = true;
 			} else {
@@ -10144,7 +10144,7 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 		 * flipping, so increasing its cost here shouldn't be a big
 		 * deal).
 		 */
-		if (i915_fastboot && ret == 0)
+		if (i915.fastboot && ret == 0)
 			intel_modeset_check_state(set->crtc->dev);
 	}
 
@@ -11382,7 +11382,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 	 */
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list,
 			    base.head) {
-		if (crtc->active && i915_fastboot) {
+		if (crtc->active && i915.fastboot) {
 			intel_crtc_mode_from_pipe_config(crtc, &crtc->config);
 
 			DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",

drivers/gpu/drm/i915/intel_dp.c

@@ -1725,7 +1725,7 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
 		return false;
 	}
 
-	if (!i915_enable_psr) {
+	if (!i915.enable_psr) {
 		DRM_DEBUG_KMS("PSR disable by flag\n");
 		return false;
 	}

drivers/gpu/drm/i915/intel_lvds.c

@@ -848,8 +848,8 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	/* use the module option value if specified */
-	if (i915_lvds_channel_mode > 0)
-		return i915_lvds_channel_mode == 2;
+	if (i915.lvds_channel_mode > 0)
+		return i915.lvds_channel_mode == 2;
 
 	if (dmi_check_system(intel_dual_link_lvds))
 		return true;
@@ -1036,7 +1036,7 @@ void intel_lvds_init(struct drm_device *dev)
 					intel_find_panel_downclock(dev,
 					fixed_mode, connector);
 				if (intel_connector->panel.downclock_mode !=
-					NULL &&	i915_lvds_downclock) {
+					NULL &&	i915.lvds_downclock) {
 					/* We found the downclock for LVDS. */
 					dev_priv->lvds_downclock_avail = true;
 					dev_priv->lvds_downclock =

drivers/gpu/drm/i915/intel_panel.c

@@ -323,13 +323,6 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 	pipe_config->gmch_pfit.lvds_border_bits = border;
 }
 
-static int i915_panel_invert_brightness;
-MODULE_PARM_DESC(invert_brightness, "Invert backlight brightness "
-	"(-1 force normal, 0 machine defaults, 1 force inversion), please "
-	"report PCI device ID, subsystem vendor and subsystem device ID "
-	"to dri-devel@lists.freedesktop.org, if your machine needs it. "
-	"It will then be included in an upcoming module version.");
-module_param_named(invert_brightness, i915_panel_invert_brightness, int, 0600);
 static u32 intel_panel_compute_brightness(struct intel_connector *connector,
 					  u32 val)
 {
@@ -339,10 +332,10 @@ static u32 intel_panel_compute_brightness(struct intel_connector *connector,
 
 	WARN_ON(panel->backlight.max == 0);
 
-	if (i915_panel_invert_brightness < 0)
+	if (i915.invert_brightness < 0)
 		return val;
 
-	if (i915_panel_invert_brightness > 0 ||
+	if (i915.invert_brightness > 0 ||
 	    dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS) {
 		return panel->backlight.max - val;
 	}
@@ -808,13 +801,13 @@ intel_panel_detect(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	/* Assume that the BIOS does not lie through the OpRegion... */
-	if (!i915_panel_ignore_lid && dev_priv->opregion.lid_state) {
+	if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
 		return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
 			connector_status_connected :
 			connector_status_disconnected;
 	}
 
-	switch (i915_panel_ignore_lid) {
+	switch (i915.panel_ignore_lid) {
 	case -2:
 		return connector_status_connected;
 	case -1:

drivers/gpu/drm/i915/intel_pm.c

@@ -469,7 +469,7 @@ void intel_update_fbc(struct drm_device *dev)
 		return;
 	}
 
-	if (!i915_powersave) {
+	if (!i915.powersave) {
 		if (set_no_fbc_reason(dev_priv, FBC_MODULE_PARAM))
 			DRM_DEBUG_KMS("fbc disabled per module param\n");
 		return;
@@ -508,13 +508,13 @@ void intel_update_fbc(struct drm_device *dev)
 	obj = intel_fb->obj;
 	adjusted_mode = &intel_crtc->config.adjusted_mode;
 
-	if (i915_enable_fbc < 0 &&
+	if (i915.enable_fbc < 0 &&
 	    INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev)) {
 		if (set_no_fbc_reason(dev_priv, FBC_CHIP_DEFAULT))
 			DRM_DEBUG_KMS("disabled per chip default\n");
 		goto out_disable;
 	}
-	if (!i915_enable_fbc) {
+	if (!i915.enable_fbc) {
 		if (set_no_fbc_reason(dev_priv, FBC_MODULE_PARAM))
 			DRM_DEBUG_KMS("fbc disabled per module param\n");
 		goto out_disable;
@@ -3154,8 +3154,8 @@ int intel_enable_rc6(const struct drm_device *dev)
 		return 0;
 
 	/* Respect the kernel parameter if it is set */
-	if (i915_enable_rc6 >= 0)
-		return i915_enable_rc6;
+	if (i915.enable_rc6 >= 0)
+		return i915.enable_rc6;
 
 	/* Disable RC6 on Ironlake */
 	if (INTEL_INFO(dev)->gen == 5)
@@ -5279,7 +5279,7 @@ static void __intel_power_well_put(struct drm_device *dev,
 	WARN_ON(!power_well->count);
 
 	if (!--power_well->count && power_well->set &&
-	    i915_disable_power_well) {
+	    i915.disable_power_well) {
 		power_well->set(dev, power_well, false);
 		hsw_enable_package_c8(dev_priv);
 	}