Commit d37e02d8 authored by Huang Shijie's avatar Huang Shijie Committed by David Woodhouse

mtd: gpmi: add a new field for HW_GPMI_CTRL1

add the WRN_DLY_SEL field for HW_GPMI_CTRL1.
This field is used as delay for gpmi write strobe.
Signed-off-by: default avatarHuang Shijie <b32955@freescale.com>
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent ae70ba2d
......@@ -731,6 +731,7 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
hw->use_half_periods = dll_use_half_periods;
hw->sample_delay_factor = sample_delay_factor;
hw->device_busy_timeout = GPMI_DEFAULT_BUSY_TIMEOUT;
hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS;
/* Return success. */
return 0;
......@@ -769,6 +770,11 @@ void gpmi_begin(struct gpmi_nand_data *this)
/* [3] The following code is to set the HW_GPMI_CTRL1. */
/* Set the WRN_DLY_SEL */
writel(BM_GPMI_CTRL1_WRN_DLY_SEL, gpmi_regs + HW_GPMI_CTRL1_CLR);
writel(BF_GPMI_CTRL1_WRN_DLY_SEL(hw.wrn_dly_sel),
gpmi_regs + HW_GPMI_CTRL1_SET);
/* DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD. */
writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR);
......
......@@ -195,6 +195,7 @@ struct gpmi_nand_data {
* @use_half_periods: Indicates the clock is running slowly, so the
* NFC DLL should use half-periods.
* @sample_delay_factor: The sample delay factor.
* @wrn_dly_sel: The delay on the GPMI write strobe.
*/
struct gpmi_nfc_hardware_timing {
/* for HW_GPMI_TIMING0 */
......@@ -209,6 +210,7 @@ struct gpmi_nfc_hardware_timing {
/* for HW_GPMI_CTRL1 */
bool use_half_periods;
uint8_t sample_delay_factor;
uint8_t wrn_dly_sel;
};
/**
......
......@@ -108,6 +108,15 @@
#define HW_GPMI_CTRL1_CLR 0x00000068
#define HW_GPMI_CTRL1_TOG 0x0000006c
#define BP_GPMI_CTRL1_WRN_DLY_SEL 22
#define BM_GPMI_CTRL1_WRN_DLY_SEL (0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL)
#define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \
(((v) << BP_GPMI_CTRL1_WRN_DLY_SEL) & BM_GPMI_CTRL1_WRN_DLY_SEL)
#define BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS 0x0
#define BV_GPMI_CTRL1_WRN_DLY_SEL_6_TO_10NS 0x1
#define BV_GPMI_CTRL1_WRN_DLY_SEL_7_TO_12NS 0x2
#define BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY 0x3
#define BM_GPMI_CTRL1_BCH_MODE (1 << 18)
#define BP_GPMI_CTRL1_DLL_ENABLE 17
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment