Commit d3965191 authored by Tero Kristo's avatar Tero Kristo Committed by Kevin Hilman

ARM: OMAP3+: voltage: remove unused volt_setup_time parameter

This is no longer needed as the ramp times are calculated from
voltage deltas + slew rates.
Signed-off-by: default avatarTero Kristo <t-kristo@ti.com>
Signed-off-by: default avatarKevin Hilman <khilman@ti.com>
parent 5a84dc5b
...@@ -141,7 +141,6 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) ...@@ -141,7 +141,6 @@ static u8 twl6030_uv_to_vsel(unsigned long uv)
static struct omap_voltdm_pmic omap3_mpu_pmic = { static struct omap_voltdm_pmic omap3_mpu_pmic = {
.slew_rate = 4000, .slew_rate = 4000,
.step_size = 12500, .step_size = 12500,
.volt_setup_time = 0xfff,
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
...@@ -158,7 +157,6 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = { ...@@ -158,7 +157,6 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = {
static struct omap_voltdm_pmic omap3_core_pmic = { static struct omap_voltdm_pmic omap3_core_pmic = {
.slew_rate = 4000, .slew_rate = 4000,
.step_size = 12500, .step_size = 12500,
.volt_setup_time = 0xfff,
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
...@@ -175,7 +173,6 @@ static struct omap_voltdm_pmic omap3_core_pmic = { ...@@ -175,7 +173,6 @@ static struct omap_voltdm_pmic omap3_core_pmic = {
static struct omap_voltdm_pmic omap4_mpu_pmic = { static struct omap_voltdm_pmic omap4_mpu_pmic = {
.slew_rate = 4000, .slew_rate = 4000,
.step_size = 12660, .step_size = 12660,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
...@@ -193,7 +190,6 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { ...@@ -193,7 +190,6 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = {
static struct omap_voltdm_pmic omap4_iva_pmic = { static struct omap_voltdm_pmic omap4_iva_pmic = {
.slew_rate = 4000, .slew_rate = 4000,
.step_size = 12660, .step_size = 12660,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
...@@ -211,7 +207,6 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { ...@@ -211,7 +207,6 @@ static struct omap_voltdm_pmic omap4_iva_pmic = {
static struct omap_voltdm_pmic omap4_core_pmic = { static struct omap_voltdm_pmic omap4_core_pmic = {
.slew_rate = 4000, .slew_rate = 4000,
.step_size = 12660, .step_size = 12660,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
......
...@@ -129,7 +129,6 @@ struct voltagedomain { ...@@ -129,7 +129,6 @@ struct voltagedomain {
struct omap_voltdm_pmic { struct omap_voltdm_pmic {
int slew_rate; int slew_rate;
int step_size; int step_size;
u16 volt_setup_time;
u16 i2c_slave_addr; u16 i2c_slave_addr;
u16 volt_reg_addr; u16 volt_reg_addr;
u16 cmd_reg_addr; u16 cmd_reg_addr;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment