Commit d3cb2de2 authored by Bard Liao's avatar Bard Liao Committed by Mark Brown

ASoC: rt5659: add rt5659 codec driver

This is the initial codec driver for rt5659.
Signed-off-by: default avatarBard Liao <bardliao@realtek.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 8005c49d
RT5659/RT5658 audio CODEC
This device supports I2C only.
Required properties:
- compatible : One of "realtek,rt5659" or "realtek,rt5658".
- reg : The I2C address of the device.
- interrupts : The CODEC's interrupt output.
Optional properties:
- realtek,in1-differential
- realtek,in3-differential
- realtek,in4-differential
Boolean. Indicate MIC1/3/4 input are differential, rather than single-ended.
- realtek,dmic1-data-pin
0: dmic1 is not used
1: using IN2N pin as dmic1 data pin
2: using GPIO5 pin as dmic1 data pin
3: using GPIO9 pin as dmic1 data pin
4: using GPIO11 pin as dmic1 data pin
- realtek,dmic2-data-pin
0: dmic2 is not used
1: using IN2P pin as dmic2 data pin
2: using GPIO6 pin as dmic2 data pin
3: using GPIO10 pin as dmic2 data pin
4: using GPIO12 pin as dmic2 data pin
- realtek,jd-src
0: No JD is used
1: using JD3 as JD source
- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
- realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
Pins on the device (for linking into audio routes) for RT5659/RT5658:
* DMIC L1
* DMIC R1
* DMIC L2
* DMIC R2
* IN1P
* IN1N
* IN2P
* IN2N
* IN3P
* IN3N
* IN4P
* IN4N
* HPOL
* HPOR
* SPOL
* SPOR
* LOUTL
* LOUTR
* MONOOUT
* PDML
* PDMR
* SPDIF
Example:
rt5659 {
compatible = "realtek,rt5659";
reg = <0x1b>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
/*
* linux/sound/rt5659.h -- Platform data for RT5659
*
* Copyright 2013 Realtek Microelectronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __LINUX_SND_RT5659_H
#define __LINUX_SND_RT5659_H
enum rt5659_dmic1_data_pin {
RT5659_DMIC1_NULL,
RT5659_DMIC1_DATA_IN2N,
RT5659_DMIC1_DATA_GPIO5,
RT5659_DMIC1_DATA_GPIO9,
RT5659_DMIC1_DATA_GPIO11,
};
enum rt5659_dmic2_data_pin {
RT5659_DMIC2_NULL,
RT5659_DMIC2_DATA_IN2P,
RT5659_DMIC2_DATA_GPIO6,
RT5659_DMIC2_DATA_GPIO10,
RT5659_DMIC2_DATA_GPIO12,
};
enum rt5659_jd_src {
RT5659_JD_NULL,
RT5659_JD3,
};
struct rt5659_platform_data {
bool in1_diff;
bool in3_diff;
bool in4_diff;
int ldo1_en; /* GPIO for LDO1_EN */
int reset; /* GPIO for RESET */
enum rt5659_dmic1_data_pin dmic1_data_pin;
enum rt5659_dmic2_data_pin dmic2_data_pin;
enum rt5659_jd_src jd_src;
};
#endif
......@@ -93,6 +93,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_RT5640 if I2C
select SND_SOC_RT5645 if I2C
select SND_SOC_RT5651 if I2C
select SND_SOC_RT5659 if I2C
select SND_SOC_RT5670 if I2C
select SND_SOC_RT5677 if I2C && SPI_MASTER
select SND_SOC_SGTL5000 if I2C
......@@ -526,11 +527,13 @@ config SND_SOC_RL6231
default y if SND_SOC_RT5640=y
default y if SND_SOC_RT5645=y
default y if SND_SOC_RT5651=y
default y if SND_SOC_RT5659=y
default y if SND_SOC_RT5670=y
default y if SND_SOC_RT5677=y
default m if SND_SOC_RT5640=m
default m if SND_SOC_RT5645=m
default m if SND_SOC_RT5651=m
default m if SND_SOC_RT5659=m
default m if SND_SOC_RT5670=m
default m if SND_SOC_RT5677=m
......@@ -562,6 +565,9 @@ config SND_SOC_RT5645
config SND_SOC_RT5651
tristate
config SND_SOC_RT5659
tristate
config SND_SOC_RT5670
tristate
......
......@@ -89,6 +89,7 @@ snd-soc-rt5631-objs := rt5631.o
snd-soc-rt5640-objs := rt5640.o
snd-soc-rt5645-objs := rt5645.o
snd-soc-rt5651-objs := rt5651.o
snd-soc-rt5659-objs := rt5659.o
snd-soc-rt5670-objs := rt5670.o
snd-soc-rt5677-objs := rt5677.o
snd-soc-rt5677-spi-objs := rt5677-spi.o
......@@ -284,6 +285,7 @@ obj-$(CONFIG_SND_SOC_RT5631) += snd-soc-rt5631.o
obj-$(CONFIG_SND_SOC_RT5640) += snd-soc-rt5640.o
obj-$(CONFIG_SND_SOC_RT5645) += snd-soc-rt5645.o
obj-$(CONFIG_SND_SOC_RT5651) += snd-soc-rt5651.o
obj-$(CONFIG_SND_SOC_RT5659) += snd-soc-rt5659.o
obj-$(CONFIG_SND_SOC_RT5670) += snd-soc-rt5670.o
obj-$(CONFIG_SND_SOC_RT5677) += snd-soc-rt5677.o
obj-$(CONFIG_SND_SOC_RT5677_SPI) += snd-soc-rt5677-spi.o
......
This source diff could not be displayed because it is too large. You can view the blob instead.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment