iio: imu: st_lsm6dsx: add system power management support

Add system sleep power management support to st_lsm6dsx driver.
In particular during suspend phase each sensor is disabled and
hw fifo is configured in bypass in order to avoid subsequent
I/O operations. The patch has been tested on HiKey board device
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h

@@ -135,6 +135,8 @@ struct st_lsm6dsx_hw {
 #endif /* CONFIG_SPI_MASTER */
 };
 
+extern const struct dev_pm_ops st_lsm6dsx_pm_ops;
+
 int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
 		     const struct st_lsm6dsx_transfer_function *tf_ops);
 int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor);

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c

@@ -36,6 +36,7 @@
 #include <linux/delay.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
+#include <linux/pm.h>
 
 #include <linux/platform_data/st_sensors_pdata.h>
 
@@ -731,6 +732,59 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
 }
 EXPORT_SYMBOL(st_lsm6dsx_probe);
 
+#ifdef CONFIG_PM
+static int st_lsm6dsx_suspend(struct device *dev)
+{
+	struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
+	struct st_lsm6dsx_sensor *sensor;
+	int i, err = 0;
+
+	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		sensor = iio_priv(hw->iio_devs[i]);
+		if (!(hw->enable_mask & BIT(sensor->id)))
+			continue;
+
+		err = st_lsm6dsx_write_with_mask(hw,
+				st_lsm6dsx_odr_table[sensor->id].reg.addr,
+				st_lsm6dsx_odr_table[sensor->id].reg.mask, 0);
+		if (err < 0)
+			return err;
+	}
+
+	if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS)
+		err = st_lsm6dsx_flush_fifo(hw);
+
+	return err;
+}
+
+static int st_lsm6dsx_resume(struct device *dev)
+{
+	struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
+	struct st_lsm6dsx_sensor *sensor;
+	int i, err = 0;
+
+	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		sensor = iio_priv(hw->iio_devs[i]);
+		if (!(hw->enable_mask & BIT(sensor->id)))
+			continue;
+
+		err = st_lsm6dsx_set_odr(sensor, sensor->odr);
+		if (err < 0)
+			return err;
+	}
+
+	if (hw->enable_mask)
+		err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
+
+	return err;
+}
+#endif /* CONFIG_PM */
+
+const struct dev_pm_ops st_lsm6dsx_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(st_lsm6dsx_suspend, st_lsm6dsx_resume)
+};
+EXPORT_SYMBOL(st_lsm6dsx_pm_ops);
+
 MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@st.com>");
 MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
 MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx driver");

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c

@@ -98,6 +98,7 @@ MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
 static struct i2c_driver st_lsm6dsx_driver = {
 	.driver = {
 		.name = "st_lsm6dsx_i2c",
+		.pm = &st_lsm6dsx_pm_ops,
 		.of_match_table = of_match_ptr(st_lsm6dsx_i2c_of_match),
 	},
 	.probe = st_lsm6dsx_i2c_probe,

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c

@@ -115,6 +115,7 @@ MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
 static struct spi_driver st_lsm6dsx_driver = {
 	.driver = {
 		.name = "st_lsm6dsx_spi",
+		.pm = &st_lsm6dsx_pm_ops,
 		.of_match_table = of_match_ptr(st_lsm6dsx_spi_of_match),
 	},
 	.probe = st_lsm6dsx_spi_probe,