ARM: SAMSUNG: Gracefully exit on suspend failure

As per the Exynos5250 User Manual:
When there are pending interrupt events, WFI/WFE instruction are
ignored. To cancel the power-down sequence follow these steps:
1) Disable system power-down using CENTRAL_SEQ_CONFIGURATION register
2) Clear WAKEUP_STAT register
3) Enable interrupt service routine for CPU

Code for early wakeup for exynos already exists. Remove the panic
on suspend failure, clear the wakeup state register and return 1
from cpu_suspend to indicate a failed suspend (to a user daemon).

Older Samsung SoCs have similar panics and I have removed them all.
Haven't touched the S3C2410 sleep code.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-exynos/pm.c

@@ -91,8 +91,8 @@ static int exynos_cpu_suspend(unsigned long arg)
 	/* issue the standby signal into the pm unit. */
 	cpu_do_idle();
 
-	/* we should never get past here */
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 static void exynos_pm_prepare(void)
@@ -282,6 +282,8 @@ static void exynos_pm_resume(void)
 	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
 		tmp |= S5P_CENTRAL_LOWPWR_CFG;
 		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+		/* clear the wakeup state register */
+		__raw_writel(0x0, S5P_WAKEUP_STAT);
 		/* No need to perform below restore code */
 		goto early_wakeup;
 	}

arch/arm/mach-s3c24xx/pm-s3c2412.c

@@ -48,7 +48,8 @@ static int s3c2412_cpu_suspend(unsigned long arg)
 
 	s3c2412_sleep_enter();
 
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 static void s3c2412_pm_prepare(void)

arch/arm/mach-s3c24xx/pm-s3c2416.c

@@ -34,7 +34,8 @@ static int s3c2416_cpu_suspend(unsigned long arg)
 
 	s3c2412_sleep_enter();
 
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 static void s3c2416_pm_prepare(void)

arch/arm/mach-s3c64xx/pm.c

@@ -296,7 +296,8 @@ static int s3c64xx_cpu_suspend(unsigned long arg)
 
 	/* we should never get past here */
 
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 /* mapping of interrupts to parts of the wakeup mask */

arch/arm/mach-s5p64x0/pm.c

@@ -103,8 +103,8 @@ static int s5p64x0_cpu_suspend(unsigned long arg)
 	    "mcr p15, 0, %0, c7, c10, 4\n\t"
 	    "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp));
 
-	/* we should never get past here */
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 /* mapping of interrupts to parts of the wakeup mask */

arch/arm/mach-s5pv210/pm.c

@@ -104,8 +104,8 @@ static int s5pv210_cpu_suspend(unsigned long arg)
 	    "mcr p15, 0, %0, c7, c10, 4\n\t"
 	    "wfi" : : "r" (tmp));
 
-	/* we should never get past here */
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 static void s5pv210_pm_prepare(void)

arch/arm/plat-samsung/pm.c

@@ -243,6 +243,7 @@ int (*pm_cpu_sleep)(unsigned long);
 
 static int s3c_pm_enter(suspend_state_t state)
 {
+	int ret;
 	/* ensure the debug is initialised (if enabled) */
 
 	s3c_pm_debug_init();
@@ -300,7 +301,9 @@ static int s3c_pm_enter(suspend_state_t state)
 	 * we resume as it saves its own register state and restores it
 	 * during the resume.  */
 
-	cpu_suspend(0, pm_cpu_sleep);
+	ret = cpu_suspend(0, pm_cpu_sleep);
+	if (ret)
+		return ret;
 
 	/* restore the system state */