Commit d4201854 authored by Maximilian Luz's avatar Maximilian Luz Committed by Hans de Goede

platform/surface: aggregator_registry: Add KIP device hub

Add a Surface System Aggregator Module (SSAM) client device hub for
hot-removable devices managed via the KIP subsystem.

The KIP subsystem (full name unknown, abbreviation has been obtained
through reverse engineering) is a subsystem that manages hot-removable
SSAM client devices. Specifically, it manages HID input devices
contained in the detachable keyboard cover of the Surface Pro 8 and
Surface Pro X.

The KIP subsystem handles a single group of devices (e.g. all devices
contained in the keyboard cover) and cannot handle devices individually.
Thus we model it as a client device hub, which (hot-)removes all devices
contained under it once removal of the hub (e.g. keyboard cover) has
been detected and (re-)adds all devices once the physical hub device has
been (re-)attached. To do this, use the previously generified SSAM
subsystem hub framework.
Signed-off-by: default avatarMaximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-12-luzmaximilian@gmail.comReviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
parent 58a4d884
...@@ -551,6 +551,93 @@ static struct ssam_device_driver ssam_base_hub_driver = { ...@@ -551,6 +551,93 @@ static struct ssam_device_driver ssam_base_hub_driver = {
}; };
/* -- SSAM KIP-subsystem hub driver. ---------------------------------------- */
/*
* Some devices may need a bit of time to be fully usable after being
* (re-)connected. This delay has been determined via experimentation.
*/
#define SSAM_KIP_UPDATE_CONNECT_DELAY msecs_to_jiffies(250)
#define SSAM_EVENT_KIP_CID_CONNECTION 0x2c
SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_get_connection_state, u8, {
.target_category = SSAM_SSH_TC_KIP,
.target_id = 0x01,
.command_id = 0x2c,
.instance_id = 0x00,
});
static int ssam_kip_get_connection_state(struct ssam_hub *hub, enum ssam_hub_state *state)
{
int status;
u8 connected;
status = ssam_retry(__ssam_kip_get_connection_state, hub->sdev->ctrl, &connected);
if (status < 0) {
dev_err(&hub->sdev->dev, "failed to query KIP connection state: %d\n", status);
return status;
}
*state = connected ? SSAM_HUB_CONNECTED : SSAM_HUB_DISCONNECTED;
return 0;
}
static u32 ssam_kip_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
{
struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
if (event->command_id != SSAM_EVENT_KIP_CID_CONNECTION)
return 0; /* Return "unhandled". */
if (event->length < 1) {
dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length);
return 0;
}
ssam_hub_update(hub, event->data[0]);
return SSAM_NOTIF_HANDLED;
}
static int ssam_kip_hub_probe(struct ssam_device *sdev)
{
struct ssam_hub *hub;
hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL);
if (!hub)
return -ENOMEM;
hub->notif.base.priority = INT_MAX; /* This notifier should run first. */
hub->notif.base.fn = ssam_kip_hub_notif;
hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM;
hub->notif.event.id.target_category = SSAM_SSH_TC_KIP,
hub->notif.event.id.instance = 0,
hub->notif.event.mask = SSAM_EVENT_MASK_TARGET;
hub->notif.event.flags = SSAM_EVENT_SEQUENCED;
hub->connect_delay = SSAM_KIP_UPDATE_CONNECT_DELAY;
hub->get_state = ssam_kip_get_connection_state;
return ssam_hub_setup(sdev, hub);
}
static const struct ssam_device_id ssam_kip_hub_match[] = {
{ SSAM_VDEV(HUB, 0x01, SSAM_SSH_TC_KIP, 0x00) },
{ },
};
static struct ssam_device_driver ssam_kip_hub_driver = {
.probe = ssam_kip_hub_probe,
.remove = ssam_hub_remove,
.match_table = ssam_kip_hub_match,
.driver = {
.name = "surface_kip_hub",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &ssam_hub_pm_ops,
},
};
/* -- SSAM platform/meta-hub driver. ---------------------------------------- */ /* -- SSAM platform/meta-hub driver. ---------------------------------------- */
static const struct acpi_device_id ssam_platform_hub_match[] = { static const struct acpi_device_id ssam_platform_hub_match[] = {
...@@ -673,18 +760,30 @@ static int __init ssam_device_hub_init(void) ...@@ -673,18 +760,30 @@ static int __init ssam_device_hub_init(void)
status = platform_driver_register(&ssam_platform_hub_driver); status = platform_driver_register(&ssam_platform_hub_driver);
if (status) if (status)
return status; goto err_platform;
status = ssam_device_driver_register(&ssam_base_hub_driver); status = ssam_device_driver_register(&ssam_base_hub_driver);
if (status) if (status)
platform_driver_unregister(&ssam_platform_hub_driver); goto err_base;
status = ssam_device_driver_register(&ssam_kip_hub_driver);
if (status)
goto err_kip;
return 0;
err_kip:
ssam_device_driver_unregister(&ssam_base_hub_driver);
err_base:
platform_driver_unregister(&ssam_platform_hub_driver);
err_platform:
return status; return status;
} }
module_init(ssam_device_hub_init); module_init(ssam_device_hub_init);
static void __exit ssam_device_hub_exit(void) static void __exit ssam_device_hub_exit(void)
{ {
ssam_device_driver_unregister(&ssam_kip_hub_driver);
ssam_device_driver_unregister(&ssam_base_hub_driver); ssam_device_driver_unregister(&ssam_base_hub_driver);
platform_driver_unregister(&ssam_platform_hub_driver); platform_driver_unregister(&ssam_platform_hub_driver);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment