Skip to content

L
linux
Commit d47e5382 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files
Options

Merge tag 'iio-for-4.12d' of... 

Merge tag 'iio-for-4.12d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Fourth set of IIO new device support, features and cleanups for the 4.12 cycle

New device support
* max1117, 1118 and 1119
  - new ADC driver
* max9611
  - new ADC driver
* pm8xxx hk/xoadc
  - new driver with some shared features broken out from the SPMI vadc.
* sun4i-gpadc
  - A33 thermal sensor support (with associated rework)
* stm32-dac
  - new driver and bindings
* stm32 trigger
  - enable support of quadrature encoder device and counter modes

Features
* apds9960
  - use the runtime pm for normal suspend
* stm32-adc
  - add opition to sest resolution via devicetree
* xoadc
  - augment DT bindings to deal with some weird mux cases

Cleanups
* ad5933
  - protect direct mode using claim and release helpers
* ade7759
  - S_IRUGO and friends to octal in two goes
* adis16203
  - drop unnecessary brackets
* hid-sensor
  - fix unbalanced pm_runtieme_enable error when probing after remove
* lsm6dsx
  - use actual part numbers for device name when known
  - simplify data read pin parsing
* mpu3050
  - avoid double reporting errors
parents 18125dc0 d454ae2e
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 3709 additions and 444 deletions
Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 0 → 100644
View file @ d47e5382
What: /sys/bus/iio/devices/iio:deviceX/in_power_shunt_resistor
Date: March 2017
KernelVersion: 4.12
Contact: linux-iio@vger.kernel.org
Description: The value of the shunt resistor used to compute power drain on
common input voltage pin (RS+). In Ohms.
What: /sys/bus/iio/devices/iio:deviceX/in_current_shunt_resistor
Date: March 2017
KernelVersion: 4.12
Contact: linux-iio@vger.kernel.org
Description: The value of the shunt resistor used to compute current flowing
between RS+ and RS- voltage sense inputs. In Ohms.
These attributes describe a single physical component, exposed as two distinct
attributes as it is used to calculate two different values: power load and
current flowing between RS+ and RS- inputs.
Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
View file @ d47e5382
......@@ -3,11 +3,15 @@ KernelVersion: 4.11
Contact: benjamin.gaignard@st.com
Description:
Reading returns the list possible master modes which are:
- "reset" : The UG bit from the TIMx_EGR register is used as trigger output (TRGO).
- "enable" : The Counter Enable signal CNT_EN is used as trigger output.
- "reset" : The UG bit from the TIMx_EGR register is
used as trigger output (TRGO).
- "enable" : The Counter Enable signal CNT_EN is used
as trigger output.
- "update" : The update event is selected as trigger output.
For instance a master timer can then be used as a prescaler for a slave timer.
- "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set.
For instance a master timer can then be used
as a prescaler for a slave timer.
- "compare_pulse" : The trigger output send a positive pulse
when the CC1IF flag is to be set.
- "OC1REF" : OC1REF signal is used as trigger output.
- "OC2REF" : OC2REF signal is used as trigger output.
- "OC3REF" : OC3REF signal is used as trigger output.
......@@ -27,3 +31,62 @@ Description:
Reading returns the current sampling frequency.
Writing an value different of 0 set and start sampling.
Writing 0 stop sampling.
What: /sys/bus/iio/devices/iio:deviceX/in_count0_preset
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
Description:
Reading returns the current preset value.
Writing sets the preset value.
When counting up the counter starts from 0 and fires an
event when reach preset value.
When counting down the counter start from preset value
and fire event when reach 0.
What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
Description:
Reading returns the list possible quadrature modes.
What: /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
Description:
Configure the device counter quadrature modes:
channel_A:
Encoder A input servers as the count input and B as
the UP/DOWN direction control input.
channel_B:
Encoder B input serves as the count input and A as
the UP/DOWN direction control input.
quadrature:
Encoder A and B inputs are mixed to get direction
and count with a scale of 0.25.
What: /sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
Description:
Reading returns the list possible enable modes.
What: /sys/bus/iio/devices/iio:deviceX/in_count0_enable_mode
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
Description:
Configure the device counter enable modes, in all case
counting direction is set by in_count0_count_direction
attribute and the counter is clocked by the internal clock.
always:
Counter is always ON.
gated:
Counting is enabled when connected trigger signal
level is high else counting is disabled.
triggered:
Counting is enabled on rising edge of the connected
trigger, and remains enabled for the duration of this
selected mode.
Documentation/devicetree/bindings/iio/adc/max1118.txt 0 → 100644
View file @ d47e5382
* MAX1117/MAX1118/MAX1119 8-bit, dual-channel ADCs
Required properties:
- compatible: Should be one of
* "maxim,max1117"
* "maxim,max1118"
* "maxim,max1119"
- reg: spi chip select number for the device
- (max1118 only) vref-supply: The regulator supply for ADC reference voltage
Recommended properties:
- spi-max-frequency: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
Example:
adc@0 {
compatible = "maxim,max1118";
reg = <0>;
vref-supply = <&vdd_supply>;
spi-max-frequency = <1000000>;
};
Documentation/devicetree/bindings/iio/adc/max9611.txt 0 → 100644
View file @ d47e5382
* Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface
Maxim max9611/max9612 is an high-side current sense amplifier with integrated
12-bits ADC communicating over I2c bus.
The device node for this driver shall be a child of a I2c controller.
Required properties
- compatible: Should be "maxim,max9611" or "maxim,max9612"
- reg: The 7-bits long I2c address of the device
- shunt-resistor-micro-ohms: Value, in micro Ohms, of the current sense shunt
resistor
Example:
&i2c4 {
csa: adc@7c {
compatible = "maxim,max9611";
reg = <0x7c>;
shunt-resistor-micro-ohms = <5000>;
};
};
This device node describes a current sense amplifier sitting on I2c4 bus
with address 0x7c (read address is 0xf9, write address is 0xf8).
A sense resistor of 0,005 Ohm is installed between RS+ and RS- current-sensing
inputs.
Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt
View file @ d47e5382
......@@ -19,32 +19,42 @@ Required properties:
with PMIC variant but is typically something like 2.2 or 1.8V.
The following required properties are standard for IO channels, see
iio-bindings.txt for more details:
iio-bindings.txt for more details, but notice that this particular
ADC has a special addressing scheme that require two cells for
identifying each ADC channel:
- #address-cells: should be set to <1>
- #address-cells: should be set to <2>, the first cell is the
prescaler (on PM8058) or premux (on PM8921) with two valid bits
so legal values are 0x00, 0x01 or 0x02. The second cell
is the main analog mux setting (0x00..0x0f). The combination
of prescaler/premux and analog mux uniquely addresses a hardware
channel on all systems.
- #size-cells: should be set to <0>
- #io-channel-cells: should be set to <1>
- #io-channel-cells: should be set to <2>, again the cells are
precaler or premux followed by the analog muxing line.
- interrupts: should refer to the parent PMIC interrupt controller
and reference the proper ADC interrupt.
Required subnodes:
The ADC channels are configured as subnodes of the ADC. Since some of
them are used for calibrating the ADC, these nodes are compulsory:
The ADC channels are configured as subnodes of the ADC.
Since some of them are used for calibrating the ADC, these nodes are
compulsory:
adc-channel@c {
reg = <0x0c>;
reg = <0x00 0x0c>;
};
adc-channel@d {
reg = <0x0d>;
reg = <0x00 0x0d>;
};
adc-channel@f {
reg = <0x0f>;
reg = <0x00 0x0f>;
};
These three nodes are used for absolute and ratiometric calibration
......@@ -52,13 +62,13 @@ and only need to have these reg values: they are by hardware definition
1:1 ratio converters that sample 625, 1250 and 0 milliV and create
an interpolation calibration for all other ADCs.
Optional subnodes: any channels other than channel 0x0c, 0x0d and
0x0f are optional.
Optional subnodes: any channels other than channels [0x00 0x0c],
[0x00 0x0d] and [0x00 0x0f] are optional.
Required channel node properties:
- reg: should contain the hardware channel number in the range
0 .. 0x0f (4 bits). The hardware only supports 16 channels.
0 .. 0xff (8 bits).
Optional channel node properties:
......@@ -94,56 +104,54 @@ Example:
xoadc: xoadc@197 {
compatible = "qcom,pm8058-adc";
reg = <0x197>;
interrupt-parent = <&pm8058>;
interrupts = <76 1>;
#address-cells = <1>;
interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
#address-cells = <2>;
#size-cells = <0>;
#io-channel-cells = <1>;
#io-channel-cells = <2>;
vcoin: adc-channel@0 {
reg = <0x00>;
reg = <0x00 0x00>;
};
vbat: adc-channel@1 {
reg = <0x01>;
reg = <0x00 0x01>;
};
dcin: adc-channel@2 {
reg = <0x02>;
reg = <0x00 0x02>;
};
ichg: adc-channel@3 {
reg = <0x03>;
reg = <0x00 0x03>;
};
vph_pwr: adc-channel@4 {
reg = <0x04>;
reg = <0x00 0x04>;
};
usb_vbus: adc-channel@a {
reg = <0x0a>;
reg = <0x00 0x0a>;
};
die_temp: adc-channel@b {
reg = <0x0b>;
reg = <0x00 0x0b>;
};
ref_625mv: adc-channel@c {
reg = <0x0c>;
reg = <0x00 0x0c>;
};
ref_1250mv: adc-channel@d {
reg = <0x0d>;
reg = <0x00 0x0d>;
};
ref_325mv: adc-channel@e {
reg = <0x0e>;
reg = <0x00 0x0e>;
};
ref_muxoff: adc-channel@f {
reg = <0x0f>;
reg = <0x00 0x0f>;
};
};
/* IIO client node */
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&xoadc 0x01>, /* Battery */
<&xoadc 0x02>, /* DC in (charger) */
<&xoadc 0x04>, /* VPH the main system voltage */
<&xoadc 0x0b>, /* Die temperature */
<&xoadc 0x0c>, /* Reference voltage 1.25V */
<&xoadc 0x0d>, /* Reference voltage 0.625V */
<&xoadc 0x0e>; /* Reference voltage 0.325V */
io-channels = <&xoadc 0x00 0x01>, /* Battery */
<&xoadc 0x00 0x02>, /* DC in (charger) */
<&xoadc 0x00 0x04>, /* VPH the main system voltage */
<&xoadc 0x00 0x0b>, /* Die temperature */
<&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
<&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
<&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
};
Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
View file @ d47e5382
......@@ -57,6 +57,9 @@ Optional properties:
- dmas: Phandle to dma channel for this ADC instance.
See ../../dma/dma.txt for details.
- dma-names: Must be "rx" when dmas property is being used.
- assigned-resolution-bits: Resolution (bits) to use for conversions. Must
match device available resolutions (e.g. can be 6, 8, 10 or 12 on stm32f4).
Default is maximum resolution if unset.
Example:
adc: adc@40012000 {
......@@ -84,6 +87,7 @@ Example:
st,adc-channels = <8>;
dmas = <&dma2 0 0 0x400 0x0>;
dma-names = "rx";
assigned-resolution-bits = <8>;
};
...
other adc child nodes follow...
......
Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt 0 → 100644
View file @ d47e5382
STMicroelectronics STM32 DAC
The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
may be configured in 8 or 12-bit mode. It has two output channels, each with
its own converter.
It has built-in noise and triangle waveform generator and supports external
triggers for conversions. The DAC's output buffer allows a high drive output
current.
Contents of a stm32 dac root node:
-----------------------------------
Required properties:
- compatible: Must be "st,stm32h7-dac-core".
- reg: Offset and length of the device's register set.
- clocks: Must contain an entry for pclk (which feeds the peripheral bus
interface)
- clock-names: Must be "pclk".
- vref-supply: Phandle to the vref+ input analog reference supply.
- #address-cells = <1>;
- #size-cells = <0>;
Optional properties:
- resets: Must contain the phandle to the reset controller.
- A pinctrl state named "default" for each DAC channel may be defined to set
DAC_OUTx pin in mode of operation for analog output on external pin.
Contents of a stm32 dac child node:
-----------------------------------
DAC core node should contain at least one subnode, representing a
DAC instance/channel available on the machine.
Required properties:
- compatible: Must be "st,stm32-dac".
- reg: Must be either 1 or 2, to define (single) channel in use
- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
Documentation/devicetree/bindings/iio/iio-bindings.txt
Example:
dac: dac@40007400 {
compatible = "st,stm32h7-dac-core";
reg = <0x40007400 0x400>;
clocks = <&clk>;
clock-names = "pclk";
vref-supply = <&reg_vref>;
pinctrl-names = "default";
pinctrl-0 = <&dac_out1 &dac_out2>;
#address-cells = <1>;
#size-cells = <0>;
dac1: dac@1 {
compatible = "st,stm32-dac";
#io-channels-cells = <1>;
reg = <1>;
};
dac2: dac@2 {
compatible = "st,stm32-dac";
#io-channels-cells = <1>;
reg = <2>;
};
};
drivers/iio/adc/Kconfig
View file @ d47e5382
......@@ -379,6 +379,18 @@ config MAX11100
To compile this driver as a module, choose M here: the module will be
called max11100.
config MAX1118
tristate "Maxim max1117/max1118/max1119 ADCs driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Maxim max1117/max1118/max1119
8-bit, dual-channel ADCs.
To compile this driver as a module, choose M here: the module will be
called max1118.
config MAX1363
tristate "Maxim max1363 ADC driver"
depends on I2C
......@@ -398,6 +410,16 @@ config MAX1363
To compile this driver as a module, choose M here: the module will be
called max1363.
config MAX9611
tristate "Maxim max9611/max9612 ADC driver"
depends on I2C
help
Say yes here to build support for Maxim max9611/max9612 current sense
amplifier with 12-bits ADC interface.
To compile this driver as a module, choose M here: the module will be
called max9611.
config MCP320X
tristate "Microchip Technology MCP3x01/02/04/08"
depends on SPI
......@@ -486,6 +508,20 @@ config PALMAS_GPADC
is used in smartphones and tablets and supports a 16 channel
general purpose ADC.
config QCOM_VADC_COMMON
tristate
config QCOM_PM8XXX_XOADC
tristate "Qualcomm SSBI PM8xxx PMIC XOADCs"
depends on MFD_PM8XXX
select QCOM_VADC_COMMON
help
ADC driver for the XOADC portions of the Qualcomm PM8xxx PMICs
using SSBI transport: PM8018, PM8038, PM8058, PM8921.
To compile this driver as a module, choose M here: the module
will be called qcom-pm8xxx-xoadc.
config QCOM_SPMI_IADC
tristate "Qualcomm SPMI PMIC current ADC"
depends on SPMI
......@@ -504,6 +540,7 @@ config QCOM_SPMI_VADC
tristate "Qualcomm SPMI PMIC voltage ADC"
depends on SPMI
select REGMAP_SPMI
select QCOM_VADC_COMMON
help
This is the IIO Voltage ADC driver for Qualcomm QPNP VADC Chip.
......@@ -594,7 +631,7 @@ config STX104
config SUN4I_GPADC
tristate "Support for the Allwinner SoCs GPADC"
depends on IIO
depends on MFD_SUN4I_GPADC
depends on MFD_SUN4I_GPADC || MACH_SUN8I
depends on THERMAL || !THERMAL_OF
help
Say yes here to build support for Allwinner (A10, A13 and A31) SoCs
......
drivers/iio/adc/Makefile
View file @ d47e5382
......@@ -37,7 +37,9 @@ obj-$(CONFIG_LTC2485) += ltc2485.o
obj-$(CONFIG_LTC2497) += ltc2497.o
obj-$(CONFIG_MAX1027) += max1027.o
obj-$(CONFIG_MAX11100) += max11100.o
obj-$(CONFIG_MAX1118) += max1118.o
obj-$(CONFIG_MAX1363) += max1363.o
obj-$(CONFIG_MAX9611) += max9611.o
obj-$(CONFIG_MCP320X) += mcp320x.o
obj-$(CONFIG_MCP3422) += mcp3422.o
obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
......@@ -47,7 +49,9 @@ obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
obj-$(CONFIG_NAU7802) += nau7802.o
obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
obj-$(CONFIG_QCOM_VADC_COMMON) += qcom-vadc-common.o
obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
......
drivers/iio/adc/max1118.c 0 → 100644
View file @ d47e5382
/*
* MAX1117/MAX1118/MAX1119 8-bit, dual-channel ADCs driver
*
* Copyright (c) 2017 Akinobu Mita <akinobu.mita@gmail.com>
*
* This file is subject to the terms and conditions of version 2 of
* the GNU General Public License. See the file COPYING in the main
* directory of this archive for more details.
*
* Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1117-MAX1119.pdf
*
* SPI interface connections
*
* SPI MAXIM
* Master Direction MAX1117/8/9
* ------ --------- -----------
* nCS --> CNVST
* SCK --> SCLK
* MISO <-- DOUT
* ------ --------- -----------
*/
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/regulator/consumer.h>
enum max1118_id {
max1117,
max1118,
max1119,
};
struct max1118 {
struct spi_device *spi;
struct mutex lock;
struct regulator *reg;
u8 data ____cacheline_aligned;
};
#define MAX1118_CHANNEL(ch) \
{ \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.channel = (ch), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.scan_index = ch, \
.scan_type = { \
.sign = 'u', \
.realbits = 8, \
.storagebits = 8, \
}, \
}
static const struct iio_chan_spec max1118_channels[] = {
MAX1118_CHANNEL(0),
MAX1118_CHANNEL(1),
IIO_CHAN_SOFT_TIMESTAMP(2),
};
static int max1118_read(struct spi_device *spi, int channel)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct max1118 *adc = iio_priv(indio_dev);
struct spi_transfer xfers[] = {
/*
* To select CH1 for conversion, CNVST pin must be brought high
* and low for a second time.
*/
{
.len = 0,
.delay_usecs = 1, /* > CNVST Low Time 100 ns */
.cs_change = 1,
},
/*
* The acquisition interval begins with the falling edge of
* CNVST. The total acquisition and conversion process takes
* <7.5us.
*/
{
.len = 0,
.delay_usecs = 8,
},
{
.rx_buf = &adc->data,
.len = 1,
},
};
int ret;
if (channel == 0)
ret = spi_sync_transfer(spi, xfers + 1, 2);
else
ret = spi_sync_transfer(spi, xfers, 3);
if (ret)
return ret;
return adc->data;
}
static int max1118_get_vref_mV(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct max1118 *adc = iio_priv(indio_dev);
const struct spi_device_id *id = spi_get_device_id(spi);
int vref_uV;
switch (id->driver_data) {
case max1117:
return 2048;
case max1119:
return 4096;
case max1118:
vref_uV = regulator_get_voltage(adc->reg);
if (vref_uV < 0)
return vref_uV;
return vref_uV / 1000;
}
return -ENODEV;
}
static int max1118_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct max1118 *adc = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
mutex_lock(&adc->lock);
*val = max1118_read(adc->spi, chan->channel);
mutex_unlock(&adc->lock);
if (*val < 0)
return *val;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = max1118_get_vref_mV(adc->spi);
if (*val < 0)
return *val;
*val2 = 8;
return IIO_VAL_FRACTIONAL_LOG2;
}
return -EINVAL;
}
static const struct iio_info max1118_info = {
.read_raw = max1118_read_raw,
.driver_module = THIS_MODULE,
};
static irqreturn_t max1118_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct max1118 *adc = iio_priv(indio_dev);
u8 data[16] = { }; /* 2x 8-bit ADC data + padding + 8 bytes timestamp */
int scan_index;
int i = 0;
mutex_lock(&adc->lock);
for_each_set_bit(scan_index, indio_dev->active_scan_mask,
indio_dev->masklength) {
const struct iio_chan_spec *scan_chan =
&indio_dev->channels[scan_index];
int ret = max1118_read(adc->spi, scan_chan->channel);
if (ret < 0) {
dev_warn(&adc->spi->dev,
"failed to get conversion data\n");
goto out;
}
data[i] = ret;
i++;
}
iio_push_to_buffers_with_timestamp(indio_dev, data,
iio_get_time_ns(indio_dev));
out:
mutex_unlock(&adc->lock);
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static int max1118_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
struct max1118 *adc;
const struct spi_device_id *id = spi_get_device_id(spi);
int ret;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
if (!indio_dev)
return -ENOMEM;
adc = iio_priv(indio_dev);
adc->spi = spi;
mutex_init(&adc->lock);
if (id->driver_data == max1118) {
adc->reg = devm_regulator_get(&spi->dev, "vref");
if (IS_ERR(adc->reg)) {
dev_err(&spi->dev, "failed to get vref regulator\n");
return PTR_ERR(adc->reg);
}
ret = regulator_enable(adc->reg);
if (ret)
return ret;
}
spi_set_drvdata(spi, indio_dev);
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &max1118_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = max1118_channels;
indio_dev->num_channels = ARRAY_SIZE(max1118_channels);
/*
* To reinitiate a conversion on CH0, it is necessary to allow for a
* conversion to be complete and all of the data to be read out. Once
* a conversion has been completed, the MAX1117/MAX1118/MAX1119 will go
* into AutoShutdown mode until the next conversion is initiated.
*/
max1118_read(spi, 0);
ret = iio_triggered_buffer_setup(indio_dev, NULL,
max1118_trigger_handler, NULL);
if (ret)
goto err_reg_disable;
ret = iio_device_register(indio_dev);
if (ret)
goto err_buffer_cleanup;
return 0;
err_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
err_reg_disable:
if (id->driver_data == max1118)
regulator_disable(adc->reg);
return ret;
}
static int max1118_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct max1118 *adc = iio_priv(indio_dev);
const struct spi_device_id *id = spi_get_device_id(spi);
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
if (id->driver_data == max1118)
return regulator_disable(adc->reg);
return 0;
}
static const struct spi_device_id max1118_id[] = {
{ "max1117", max1117 },
{ "max1118", max1118 },
{ "max1119", max1119 },
{}
};
MODULE_DEVICE_TABLE(spi, max1118_id);
#ifdef CONFIG_OF
static const struct of_device_id max1118_dt_ids[] = {
{ .compatible = "maxim,max1117" },
{ .compatible = "maxim,max1118" },
{ .compatible = "maxim,max1119" },
{},
};
MODULE_DEVICE_TABLE(of, max1118_dt_ids);
#endif
static struct spi_driver max1118_spi_driver = {
.driver = {
.name = "max1118",
.of_match_table = of_match_ptr(max1118_dt_ids),
},
.probe = max1118_probe,
.remove = max1118_remove,
.id_table = max1118_id,
};
module_spi_driver(max1118_spi_driver);
MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
MODULE_DESCRIPTION("MAXIM MAX1117/MAX1118/MAX1119 ADCs driver");
MODULE_LICENSE("GPL v2");
drivers/iio/adc/max9611.c 0 → 100644
View file @ d47e5382
This diff is collapsed.
drivers/iio/adc/qcom-pm8xxx-xoadc.c 0 → 100644
View file @ d47e5382
This diff is collapsed.
drivers/iio/adc/qcom-spmi-vadc.c
View file @ d47e5382
This diff is collapsed.
drivers/iio/adc/qcom-vadc-common.c 0 → 100644
View file @ d47e5382
#include <linux/bug.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/math64.h>
#include <linux/log2.h>
#include <linux/err.h>
#include "qcom-vadc-common.h"
/* Voltage to temperature */
static const struct vadc_map_pt adcmap_100k_104ef_104fb[] = {
{1758, -40},
{1742, -35},
{1719, -30},
{1691, -25},
{1654, -20},
{1608, -15},
{1551, -10},
{1483, -5},
{1404, 0},
{1315, 5},
{1218, 10},
{1114, 15},
{1007, 20},
{900, 25},
{795, 30},
{696, 35},
{605, 40},
{522, 45},
{448, 50},
{383, 55},
{327, 60},
{278, 65},
{237, 70},
{202, 75},
{172, 80},
{146, 85},
{125, 90},
{107, 95},
{92, 100},
{79, 105},
{68, 110},
{59, 115},
{51, 120},
{44, 125}
};
static int qcom_vadc_map_voltage_temp(const struct vadc_map_pt *pts,
u32 tablesize, s32 input, s64 *output)
{
bool descending = 1;
u32 i = 0;
if (!pts)
return -EINVAL;
/* Check if table is descending or ascending */
if (tablesize > 1) {
if (pts[0].x < pts[1].x)
descending = 0;
}
while (i < tablesize) {
if ((descending) && (pts[i].x < input)) {
/* table entry is less than measured*/
/* value and table is descending, stop */
break;
} else if ((!descending) &&
(pts[i].x > input)) {
/* table entry is greater than measured*/
/*value and table is ascending, stop */
break;
}
i++;
}
if (i == 0) {
*output = pts[0].y;
} else if (i == tablesize) {
*output = pts[tablesize - 1].y;
} else {
/* result is between search_index and search_index-1 */
/* interpolate linearly */
*output = (((s32)((pts[i].y - pts[i - 1].y) *
(input - pts[i - 1].x)) /
(pts[i].x - pts[i - 1].x)) +
pts[i - 1].y);
}
return 0;
}
static void qcom_vadc_scale_calib(const struct vadc_linear_graph *calib_graph,
u16 adc_code,
bool absolute,
s64 *scale_voltage)
{
*scale_voltage = (adc_code - calib_graph->gnd);
*scale_voltage *= calib_graph->dx;
*scale_voltage = div64_s64(*scale_voltage, calib_graph->dy);
if (absolute)
*scale_voltage += calib_graph->dx;
if (*scale_voltage < 0)
*scale_voltage = 0;
}
static int qcom_vadc_scale_volt(const struct vadc_linear_graph *calib_graph,
const struct vadc_prescale_ratio *prescale,
bool absolute, u16 adc_code,
int *result_uv)
{
s64 voltage = 0, result = 0;
qcom_vadc_scale_calib(calib_graph, adc_code, absolute, &voltage);
voltage = voltage * prescale->den;
result = div64_s64(voltage, prescale->num);
*result_uv = result;
return 0;
}
static int qcom_vadc_scale_therm(const struct vadc_linear_graph *calib_graph,
const struct vadc_prescale_ratio *prescale,
bool absolute, u16 adc_code,
int *result_mdec)
{
s64 voltage = 0, result = 0;
int ret;
qcom_vadc_scale_calib(calib_graph, adc_code, absolute, &voltage);
if (absolute)
voltage = div64_s64(voltage, 1000);
ret = qcom_vadc_map_voltage_temp(adcmap_100k_104ef_104fb,
ARRAY_SIZE(adcmap_100k_104ef_104fb),
voltage, &result);
if (ret)
return ret;
result *= 1000;
*result_mdec = result;
return 0;
}
static int qcom_vadc_scale_die_temp(const struct vadc_linear_graph *calib_graph,
const struct vadc_prescale_ratio *prescale,
bool absolute,
u16 adc_code, int *result_mdec)
{
s64 voltage = 0;
u64 temp; /* Temporary variable for do_div */
qcom_vadc_scale_calib(calib_graph, adc_code, absolute, &voltage);
if (voltage > 0) {
temp = voltage * prescale->den;
do_div(temp, prescale->num * 2);
voltage = temp;
} else {
voltage = 0;
}
voltage -= KELVINMIL_CELSIUSMIL;
*result_mdec = voltage;
return 0;
}
static int qcom_vadc_scale_chg_temp(const struct vadc_linear_graph *calib_graph,
const struct vadc_prescale_ratio *prescale,
bool absolute,
u16 adc_code, int *result_mdec)
{
s64 voltage = 0, result = 0;
qcom_vadc_scale_calib(calib_graph, adc_code, absolute, &voltage);
voltage = voltage * prescale->den;
voltage = div64_s64(voltage, prescale->num);
voltage = ((PMI_CHG_SCALE_1) * (voltage * 2));
voltage = (voltage + PMI_CHG_SCALE_2);
result = div64_s64(voltage, 1000000);
*result_mdec = result;
return 0;
}
int qcom_vadc_scale(enum vadc_scale_fn_type scaletype,
const struct vadc_linear_graph *calib_graph,
const struct vadc_prescale_ratio *prescale,
bool absolute,
u16 adc_code, int *result)
{
switch (scaletype) {
case SCALE_DEFAULT:
return qcom_vadc_scale_volt(calib_graph, prescale,
absolute, adc_code,
result);
case SCALE_THERM_100K_PULLUP:
case SCALE_XOTHERM:
return qcom_vadc_scale_therm(calib_graph, prescale,
absolute, adc_code,
result);
case SCALE_PMIC_THERM:
return qcom_vadc_scale_die_temp(calib_graph, prescale,
absolute, adc_code,
result);
case SCALE_PMI_CHG_TEMP:
return qcom_vadc_scale_chg_temp(calib_graph, prescale,
absolute, adc_code,
result);
default:
return -EINVAL;
}
}
EXPORT_SYMBOL(qcom_vadc_scale);
int qcom_vadc_decimation_from_dt(u32 value)
{
if (!is_power_of_2(value) || value < VADC_DECIMATION_MIN ||
value > VADC_DECIMATION_MAX)
return -EINVAL;
return __ffs64(value / VADC_DECIMATION_MIN);
}
EXPORT_SYMBOL(qcom_vadc_decimation_from_dt);
drivers/iio/adc/qcom-vadc-common.h 0 → 100644
View file @ d47e5382
/*
* Code shared between the different Qualcomm PMIC voltage ADCs
*/
#ifndef QCOM_VADC_COMMON_H
#define QCOM_VADC_COMMON_H
#define VADC_CONV_TIME_MIN_US 2000
#define VADC_CONV_TIME_MAX_US 2100
/* Min ADC code represents 0V */
#define VADC_MIN_ADC_CODE 0x6000
/* Max ADC code represents full-scale range of 1.8V */
#define VADC_MAX_ADC_CODE 0xa800
#define VADC_ABSOLUTE_RANGE_UV 625000
#define VADC_RATIOMETRIC_RANGE 1800
#define VADC_DEF_PRESCALING 0 /* 1:1 */
#define VADC_DEF_DECIMATION 0 /* 512 */
#define VADC_DEF_HW_SETTLE_TIME 0 /* 0 us */
#define VADC_DEF_AVG_SAMPLES 0 /* 1 sample */
#define VADC_DEF_CALIB_TYPE VADC_CALIB_ABSOLUTE
#define VADC_DECIMATION_MIN 512
#define VADC_DECIMATION_MAX 4096
#define VADC_HW_SETTLE_DELAY_MAX 10000
#define VADC_AVG_SAMPLES_MAX 512
#define KELVINMIL_CELSIUSMIL 273150
#define PMI_CHG_SCALE_1 -138890
#define PMI_CHG_SCALE_2 391750000000LL
/**
* struct vadc_map_pt - Map the graph representation for ADC channel
* @x: Represent the ADC digitized code.
* @y: Represent the physical data which can be temperature, voltage,
* resistance.
*/
struct vadc_map_pt {
s32 x;
s32 y;
};
/*
* VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels.
* VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for
* calibration.
*/
enum vadc_calibration {
VADC_CALIB_ABSOLUTE = 0,
VADC_CALIB_RATIOMETRIC
};
/**
* struct vadc_linear_graph - Represent ADC characteristics.
* @dy: numerator slope to calculate the gain.
* @dx: denominator slope to calculate the gain.
* @gnd: A/D word of the ground reference used for the channel.
*
* Each ADC device has different offset and gain parameters which are
* computed to calibrate the device.
*/
struct vadc_linear_graph {
s32 dy;
s32 dx;
s32 gnd;
};
/**
* struct vadc_prescale_ratio - Represent scaling ratio for ADC input.
* @num: the inverse numerator of the gain applied to the input channel.
* @den: the inverse denominator of the gain applied to the input channel.
*/
struct vadc_prescale_ratio {
u32 num;
u32 den;
};
/**
* enum vadc_scale_fn_type - Scaling function to convert ADC code to
* physical scaled units for the channel.
* SCALE_DEFAULT: Default scaling to convert raw adc code to voltage (uV).
* SCALE_THERM_100K_PULLUP: Returns temperature in millidegC.
* Uses a mapping table with 100K pullup.
* SCALE_PMIC_THERM: Returns result in milli degree's Centigrade.
* SCALE_XOTHERM: Returns XO thermistor voltage in millidegC.
* SCALE_PMI_CHG_TEMP: Conversion for PMI CHG temp
*/
enum vadc_scale_fn_type {
SCALE_DEFAULT = 0,
SCALE_THERM_100K_PULLUP,
SCALE_PMIC_THERM,
SCALE_XOTHERM,
SCALE_PMI_CHG_TEMP,
};
int qcom_vadc_scale(enum vadc_scale_fn_type scaletype,
const struct vadc_linear_graph *calib_graph,
const struct vadc_prescale_ratio *prescale,
bool absolute,
u16 adc_code, int *result_mdec);
int qcom_vadc_decimation_from_dt(u32 value);
#endif /* QCOM_VADC_COMMON_H */
drivers/iio/adc/stm32-adc.c
View file @ d47e5382
......@@ -60,6 +60,8 @@
#define STM32F4_EOC BIT(1)
/* STM32F4_ADC_CR1 - bit fields */
#define STM32F4_RES_SHIFT 24
#define STM32F4_RES_MASK GENMASK(25, 24)
#define STM32F4_SCAN BIT(8)
#define STM32F4_EOCIE BIT(5)
......@@ -141,6 +143,7 @@ struct stm32_adc_regs {
* @lock: spinlock
* @bufi: data buffer index
* @num_conv: expected number of scan conversions
* @res: data resolution (e.g. RES bitfield value)
* @trigger_polarity: external trigger polarity (e.g. exten)
* @dma_chan: dma channel
* @rx_buf: dma rx buffer cpu address
......@@ -157,6 +160,7 @@ struct stm32_adc {
spinlock_t lock; /* interrupt lock */
unsigned int bufi;
unsigned int num_conv;
u32 res;
u32 trigger_polarity;
struct dma_chan *dma_chan;
u8 *rx_buf;
......@@ -196,6 +200,11 @@ static const struct stm32_adc_chan_spec stm32f4_adc123_channels[] = {
{ IIO_VOLTAGE, 15, "in15" },
};
static const unsigned int stm32f4_adc_resolutions[] = {
/* sorted values so the index matches RES[1:0] in STM32F4_ADC_CR1 */
12, 10, 8, 6,
};
/**
* stm32f4_sq - describe regular sequence registers
* - L: sequence len (register & bit field)
......@@ -302,6 +311,14 @@ static void stm32_adc_conv_irq_disable(struct stm32_adc *adc)
stm32_adc_clr_bits(adc, STM32F4_ADC_CR1, STM32F4_EOCIE);
}
static void stm32_adc_set_res(struct stm32_adc *adc)
{
u32 val = stm32_adc_readl(adc, STM32F4_ADC_CR1);
val = (val & ~STM32F4_RES_MASK) | (adc->res << STM32F4_RES_SHIFT);
stm32_adc_writel(adc, STM32F4_ADC_CR1, val);
}
/**
* stm32_adc_start_conv() - Start conversions for regular channels.
* @adc: stm32 adc instance
......@@ -870,11 +887,37 @@ static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = {
{},
};
static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev)
{
struct device_node *node = indio_dev->dev.of_node;
struct stm32_adc *adc = iio_priv(indio_dev);
unsigned int i;
u32 res;
if (of_property_read_u32(node, "assigned-resolution-bits", &res))
res = stm32f4_adc_resolutions[0];
for (i = 0; i < ARRAY_SIZE(stm32f4_adc_resolutions); i++)
if (res == stm32f4_adc_resolutions[i])
break;
if (i >= ARRAY_SIZE(stm32f4_adc_resolutions)) {
dev_err(&indio_dev->dev, "Bad resolution: %u bits\n", res);
return -EINVAL;
}
dev_dbg(&indio_dev->dev, "Using %u bits resolution\n", res);
adc->res = i;
return 0;
}
static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
struct iio_chan_spec *chan,
const struct stm32_adc_chan_spec *channel,
int scan_index)
{
struct stm32_adc *adc = iio_priv(indio_dev);
chan->type = channel->type;
chan->channel = channel->channel;
chan->datasheet_name = channel->name;
......@@ -883,7 +926,7 @@ static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
chan->scan_type.sign = 'u';
chan->scan_type.realbits = 12;
chan->scan_type.realbits = stm32f4_adc_resolutions[adc->res];
chan->scan_type.storagebits = 16;
chan->ext_info = stm32_adc_ext_info;
}
......@@ -1022,6 +1065,11 @@ static int stm32_adc_probe(struct platform_device *pdev)
return ret;
}
ret = stm32_adc_of_get_resolution(indio_dev);
if (ret < 0)
goto err_clk_disable;
stm32_adc_set_res(adc);
ret = stm32_adc_chan_of_init(indio_dev);
if (ret < 0)
goto err_clk_disable;
......
drivers/iio/adc/sun4i-gpadc-iio.c
View file @ d47e5382
......@@ -85,6 +85,12 @@ static const struct gpadc_data sun6i_gpadc_data = {
.adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
};
static const struct gpadc_data sun8i_a33_gpadc_data = {
.temp_offset = -1662,
.temp_scale = 162,
.tp_mode_en = SUN8I_GPADC_CTRL1_CHOP_TEMP_EN,
};
struct sun4i_gpadc_iio {
struct iio_dev *indio_dev;
struct completion completion;
......@@ -96,6 +102,7 @@ struct sun4i_gpadc_iio {
unsigned int temp_data_irq;
atomic_t ignore_temp_data_irq;
const struct gpadc_data *data;
bool no_irq;
/* prevents concurrent reads of temperature and ADC */
struct mutex mutex;
};
......@@ -138,6 +145,23 @@ static const struct iio_chan_spec sun4i_gpadc_channels_no_temp[] = {
SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"),
};
static const struct iio_chan_spec sun8i_a33_gpadc_channels[] = {
{
.type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_OFFSET),
.datasheet_name = "temp_adc",
},
};
static const struct regmap_config sun4i_gpadc_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.fast_io = true,
};
static int sun4i_prepare_for_irq(struct iio_dev *indio_dev, int channel,
unsigned int irq)
{
......@@ -247,6 +271,17 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
{
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
if (info->no_irq) {
pm_runtime_get_sync(indio_dev->dev.parent);
regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);
pm_runtime_mark_last_busy(indio_dev->dev.parent);
pm_runtime_put_autosuspend(indio_dev->dev.parent);
return 0;
}
return sun4i_gpadc_read(indio_dev, 0, val, info->temp_data_irq);
}
......@@ -454,31 +489,69 @@ static int sun4i_irq_init(struct platform_device *pdev, const char *name,
return 0;
}
static int sun4i_gpadc_probe(struct platform_device *pdev)
static const struct of_device_id sun4i_gpadc_of_id[] = {
{
.compatible = "allwinner,sun8i-a33-ths",
.data = &sun8i_a33_gpadc_data,
},
{ /* sentinel */ }
};
static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
struct iio_dev *indio_dev)
{
struct sun4i_gpadc_iio *info;
struct iio_dev *indio_dev;
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
const struct of_device_id *of_dev;
struct thermal_zone_device *tzd;
struct resource *mem;
void __iomem *base;
int ret;
struct sun4i_gpadc_dev *sun4i_gpadc_dev;
sun4i_gpadc_dev = dev_get_drvdata(pdev->dev.parent);
of_dev = of_match_device(sun4i_gpadc_of_id, &pdev->dev);
if (!of_dev)
return -ENODEV;
info->no_irq = true;
info->data = (struct gpadc_data *)of_dev->data;
indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels);
indio_dev->channels = sun8i_a33_gpadc_channels;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(base))
return PTR_ERR(base);
info->regmap = devm_regmap_init_mmio(&pdev->dev, base,
&sun4i_gpadc_regmap_config);
if (IS_ERR(info->regmap)) {
ret = PTR_ERR(info->regmap);
dev_err(&pdev->dev, "failed to init regmap: %d\n", ret);
return ret;
}
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
if (!indio_dev)
return -ENOMEM;
if (!IS_ENABLED(CONFIG_THERMAL_OF))
return 0;
info = iio_priv(indio_dev);
platform_set_drvdata(pdev, indio_dev);
tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, info,
&sun4i_ts_tz_ops);
if (IS_ERR(tzd))
dev_err(&pdev->dev, "could not register thermal sensor: %ld\n",
PTR_ERR(tzd));
mutex_init(&info->mutex);
return PTR_ERR_OR_ZERO(tzd);
}
static int sun4i_gpadc_probe_mfd(struct platform_device *pdev,
struct iio_dev *indio_dev)
{
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
struct sun4i_gpadc_dev *sun4i_gpadc_dev =
dev_get_drvdata(pdev->dev.parent);
int ret;
info->no_irq = false;
info->regmap = sun4i_gpadc_dev->regmap;
info->indio_dev = indio_dev;
init_completion(&info->completion);
indio_dev->name = dev_name(&pdev->dev);
indio_dev->dev.parent = &pdev->dev;
indio_dev->dev.of_node = pdev->dev.of_node;
indio_dev->info = &sun4i_gpadc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->num_channels = ARRAY_SIZE(sun4i_gpadc_channels);
indio_dev->channels = sun4i_gpadc_channels;
......@@ -519,8 +592,7 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"could not register thermal sensor: %ld\n",
PTR_ERR(tzd));
ret = PTR_ERR(tzd);
goto err;
return PTR_ERR(tzd);
}
} else {
indio_dev->num_channels =
......@@ -528,36 +600,69 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
indio_dev->channels = sun4i_gpadc_channels_no_temp;
}
pm_runtime_set_autosuspend_delay(&pdev->dev,
SUN4I_GPADC_AUTOSUSPEND_DELAY);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_enable(&pdev->dev);
if (IS_ENABLED(CONFIG_THERMAL_OF)) {
ret = sun4i_irq_init(pdev, "TEMP_DATA_PENDING",
sun4i_gpadc_temp_data_irq_handler,
"temp_data", &info->temp_data_irq,
&info->ignore_temp_data_irq);
if (ret < 0)
goto err;
return ret;
}
ret = sun4i_irq_init(pdev, "FIFO_DATA_PENDING",
sun4i_gpadc_fifo_data_irq_handler, "fifo_data",
&info->fifo_data_irq, &info->ignore_fifo_data_irq);
if (ret < 0)
goto err;
return ret;
if (IS_ENABLED(CONFIG_THERMAL_OF)) {
ret = iio_map_array_register(indio_dev, sun4i_gpadc_hwmon_maps);
if (ret < 0) {
dev_err(&pdev->dev,
"failed to register iio map array\n");
goto err;
return ret;
}
}
return 0;
}
static int sun4i_gpadc_probe(struct platform_device *pdev)
{
struct sun4i_gpadc_iio *info;
struct iio_dev *indio_dev;
int ret;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
if (!indio_dev)
return -ENOMEM;
info = iio_priv(indio_dev);
platform_set_drvdata(pdev, indio_dev);
mutex_init(&info->mutex);
info->indio_dev = indio_dev;
init_completion(&info->completion);
indio_dev->name = dev_name(&pdev->dev);
indio_dev->dev.parent = &pdev->dev;
indio_dev->dev.of_node = pdev->dev.of_node;
indio_dev->info = &sun4i_gpadc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
if (pdev->dev.of_node)
ret = sun4i_gpadc_probe_dt(pdev, indio_dev);
else
ret = sun4i_gpadc_probe_mfd(pdev, indio_dev);
if (ret)
return ret;
pm_runtime_set_autosuspend_delay(&pdev->dev,
SUN4I_GPADC_AUTOSUSPEND_DELAY);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_enable(&pdev->dev);
ret = devm_iio_device_register(&pdev->dev, indio_dev);
if (ret < 0) {
dev_err(&pdev->dev, "could not register the device\n");
......@@ -567,10 +672,9 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
return 0;
err_map:
if (IS_ENABLED(CONFIG_THERMAL_OF))
if (!info->no_irq && IS_ENABLED(CONFIG_THERMAL_OF))
iio_map_array_unregister(indio_dev);
err:
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
......@@ -580,10 +684,11 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
static int sun4i_gpadc_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
if (IS_ENABLED(CONFIG_THERMAL_OF))
if (!info->no_irq && IS_ENABLED(CONFIG_THERMAL_OF))
iio_map_array_unregister(indio_dev);
return 0;
......@@ -599,6 +704,7 @@ static const struct platform_device_id sun4i_gpadc_id[] = {
static struct platform_driver sun4i_gpadc_driver = {
.driver = {
.name = "sun4i-gpadc-iio",
.of_match_table = sun4i_gpadc_of_id,
.pm = &sun4i_gpadc_pm_ops,
},
.id_table = sun4i_gpadc_id,
......
drivers/iio/common/hid-sensors/hid-sensor-trigger.c
View file @ d47e5382
......@@ -138,6 +138,10 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
{
pm_runtime_disable(&attrb->pdev->dev);
pm_runtime_set_suspended(&attrb->pdev->dev);
pm_runtime_put_noidle(&attrb->pdev->dev);
cancel_work_sync(&attrb->work);
iio_trigger_unregister(attrb->trigger);
iio_trigger_free(attrb->trigger);
......
drivers/iio/dac/Kconfig
View file @ d47e5382
......@@ -284,6 +284,21 @@ config MCP4922
To compile this driver as a module, choose M here: the module
will be called mcp4922.
config STM32_DAC
tristate "STMicroelectronics STM32 DAC"
depends on (ARCH_STM32 && OF) || COMPILE_TEST
depends on REGULATOR
select STM32_DAC_CORE
help
Say yes here to build support for STMicroelectronics STM32 Digital
to Analog Converter (DAC).
This driver can also be built as a module. If so, the module
will be called stm32-dac.
config STM32_DAC_CORE
tristate
config VF610_DAC
tristate "Vybrid vf610 DAC driver"
depends on OF
......
drivers/iio/dac/Makefile
View file @ d47e5382
......@@ -30,4 +30,6 @@ obj-$(CONFIG_MAX517) += max517.o
obj-$(CONFIG_MAX5821) += max5821.o
obj-$(CONFIG_MCP4725) += mcp4725.o
obj-$(CONFIG_MCP4922) += mcp4922.o
obj-$(CONFIG_STM32_DAC_CORE) += stm32-dac-core.o
obj-$(CONFIG_STM32_DAC) += stm32-dac.o
obj-$(CONFIG_VF610_DAC) += vf610_dac.o
drivers/iio/dac/stm32-dac-core.c 0 → 100644
View file @ d47e5382
/*
* This file is part of STM32 DAC driver
*
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
* Author: Fabrice Gasnier <fabrice.gasnier@st.com>.
*
* License type: GPLv2
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include "stm32-dac-core.h"
/**
* struct stm32_dac_priv - stm32 DAC core private data
* @pclk: peripheral clock common for all DACs
* @rst: peripheral reset control
* @vref: regulator reference
* @common: Common data for all DAC instances
*/
struct stm32_dac_priv {
struct clk *pclk;
struct reset_control *rst;
struct regulator *vref;
struct stm32_dac_common common;
};
static struct stm32_dac_priv *to_stm32_dac_priv(struct stm32_dac_common *com)
{
return container_of(com, struct stm32_dac_priv, common);
}
static const struct regmap_config stm32_dac_regmap_cfg = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = sizeof(u32),
.max_register = 0x3fc,
};
static int stm32_dac_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct stm32_dac_priv *priv;
struct regmap *regmap;
struct resource *res;
void __iomem *mmio;
int ret;
if (!dev->of_node)
return -ENODEV;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mmio = devm_ioremap_resource(dev, res);
if (IS_ERR(mmio))
return PTR_ERR(mmio);
regmap = devm_regmap_init_mmio(dev, mmio, &stm32_dac_regmap_cfg);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
priv->common.regmap = regmap;
priv->vref = devm_regulator_get(dev, "vref");
if (IS_ERR(priv->vref)) {
ret = PTR_ERR(priv->vref);
dev_err(dev, "vref get failed, %d\n", ret);
return ret;
}
ret = regulator_enable(priv->vref);
if (ret < 0) {
dev_err(dev, "vref enable failed\n");
return ret;
}
ret = regulator_get_voltage(priv->vref);
if (ret < 0) {
dev_err(dev, "vref get voltage failed, %d\n", ret);
goto err_vref;
}
priv->common.vref_mv = ret / 1000;
dev_dbg(dev, "vref+=%dmV\n", priv->common.vref_mv);
priv->pclk = devm_clk_get(dev, "pclk");
if (IS_ERR(priv->pclk)) {
ret = PTR_ERR(priv->pclk);
dev_err(dev, "pclk get failed\n");
goto err_vref;
}
ret = clk_prepare_enable(priv->pclk);
if (ret < 0) {
dev_err(dev, "pclk enable failed\n");
goto err_vref;
}
priv->rst = devm_reset_control_get(dev, NULL);
if (!IS_ERR(priv->rst)) {
reset_control_assert(priv->rst);
udelay(2);
reset_control_deassert(priv->rst);
}
/* When clock speed is higher than 80MHz, set HFSEL */
priv->common.hfsel = (clk_get_rate(priv->pclk) > 80000000UL);
ret = regmap_update_bits(regmap, STM32_DAC_CR, STM32H7_DAC_CR_HFSEL,
priv->common.hfsel ? STM32H7_DAC_CR_HFSEL : 0);
if (ret)
goto err_pclk;
platform_set_drvdata(pdev, &priv->common);
ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, dev);
if (ret < 0) {
dev_err(dev, "failed to populate DT children\n");
goto err_pclk;
}
return 0;
err_pclk:
clk_disable_unprepare(priv->pclk);
err_vref:
regulator_disable(priv->vref);
return ret;
}
static int stm32_dac_remove(struct platform_device *pdev)
{
struct stm32_dac_common *common = platform_get_drvdata(pdev);
struct stm32_dac_priv *priv = to_stm32_dac_priv(common);
of_platform_depopulate(&pdev->dev);
clk_disable_unprepare(priv->pclk);
regulator_disable(priv->vref);
return 0;
}
static const struct of_device_id stm32_dac_of_match[] = {
{ .compatible = "st,stm32h7-dac-core", },
{},
};
MODULE_DEVICE_TABLE(of, stm32_dac_of_match);
static struct platform_driver stm32_dac_driver = {
.probe = stm32_dac_probe,
.remove = stm32_dac_remove,
.driver = {
.name = "stm32-dac-core",
.of_match_table = stm32_dac_of_match,
},
};
module_platform_driver(stm32_dac_driver);
MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
MODULE_DESCRIPTION("STMicroelectronics STM32 DAC core driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:stm32-dac-core");
drivers/iio/dac/stm32-dac-core.h 0 → 100644
View file @ d47e5382
/*
* This file is part of STM32 DAC driver
*
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
* Author: Fabrice Gasnier <fabrice.gasnier@st.com>.
*
* License type: GPLv2
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __STM32_DAC_CORE_H
#define __STM32_DAC_CORE_H
#include <linux/regmap.h>
/* STM32 DAC registers */
#define STM32_DAC_CR 0x00
#define STM32_DAC_DHR12R1 0x08
#define STM32_DAC_DHR12R2 0x14
#define STM32_DAC_DOR1 0x2C
#define STM32_DAC_DOR2 0x30
/* STM32_DAC_CR bit fields */
#define STM32_DAC_CR_EN1 BIT(0)
#define STM32H7_DAC_CR_HFSEL BIT(15)
#define STM32_DAC_CR_EN2 BIT(16)
/**
* struct stm32_dac_common - stm32 DAC driver common data (for all instances)
* @regmap: DAC registers shared via regmap
* @vref_mv: reference voltage (mv)
* @hfsel: high speed bus clock selected
*/
struct stm32_dac_common {
struct regmap *regmap;
int vref_mv;
bool hfsel;
};
#endif
drivers/iio/dac/stm32-dac.c 0 → 100644
View file @ d47e5382
/*
* This file is part of STM32 DAC driver
*
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
* Authors: Amelie Delaunay <amelie.delaunay@st.com>
* Fabrice Gasnier <fabrice.gasnier@st.com>
*
* License type: GPLv2
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include "stm32-dac-core.h"
#define STM32_DAC_CHANNEL_1 1
#define STM32_DAC_CHANNEL_2 2
#define STM32_DAC_IS_CHAN_1(ch) ((ch) & STM32_DAC_CHANNEL_1)
/**
* struct stm32_dac - private data of DAC driver
* @common: reference to DAC common data
*/
struct stm32_dac {
struct stm32_dac_common *common;
};
static int stm32_dac_is_enabled(struct iio_dev *indio_dev, int channel)
{
struct stm32_dac *dac = iio_priv(indio_dev);
u32 en, val;
int ret;
ret = regmap_read(dac->common->regmap, STM32_DAC_CR, &val);
if (ret < 0)
return ret;
if (STM32_DAC_IS_CHAN_1(channel))
en = FIELD_GET(STM32_DAC_CR_EN1, val);
else
en = FIELD_GET(STM32_DAC_CR_EN2, val);
return !!en;
}
static int stm32_dac_set_enable_state(struct iio_dev *indio_dev, int ch,
bool enable)
{
struct stm32_dac *dac = iio_priv(indio_dev);
u32 msk = STM32_DAC_IS_CHAN_1(ch) ? STM32_DAC_CR_EN1 : STM32_DAC_CR_EN2;
u32 en = enable ? msk : 0;
int ret;
ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, msk, en);
if (ret < 0) {
dev_err(&indio_dev->dev, "%s failed\n", en ?
"Enable" : "Disable");
return ret;
}
/*
* When HFSEL is set, it is not allowed to write the DHRx register
* during 8 clock cycles after the ENx bit is set. It is not allowed
* to make software/hardware trigger during this period either.
*/
if (en && dac->common->hfsel)
udelay(1);
return 0;
}
static int stm32_dac_get_value(struct stm32_dac *dac, int channel, int *val)
{
int ret;
if (STM32_DAC_IS_CHAN_1(channel))
ret = regmap_read(dac->common->regmap, STM32_DAC_DOR1, val);
else
ret = regmap_read(dac->common->regmap, STM32_DAC_DOR2, val);
return ret ? ret : IIO_VAL_INT;
}
static int stm32_dac_set_value(struct stm32_dac *dac, int channel, int val)
{
int ret;
if (STM32_DAC_IS_CHAN_1(channel))
ret = regmap_write(dac->common->regmap, STM32_DAC_DHR12R1, val);
else
ret = regmap_write(dac->common->regmap, STM32_DAC_DHR12R2, val);
return ret;
}
static int stm32_dac_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct stm32_dac *dac = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
return stm32_dac_get_value(dac, chan->channel, val);
case IIO_CHAN_INFO_SCALE:
*val = dac->common->vref_mv;
*val2 = chan->scan_type.realbits;
return IIO_VAL_FRACTIONAL_LOG2;
default:
return -EINVAL;
}
}
static int stm32_dac_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct stm32_dac *dac = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
return stm32_dac_set_value(dac, chan->channel, val);
default:
return -EINVAL;
}
}
static int stm32_dac_debugfs_reg_access(struct iio_dev *indio_dev,
unsigned reg, unsigned writeval,
unsigned *readval)
{
struct stm32_dac *dac = iio_priv(indio_dev);
if (!readval)
return regmap_write(dac->common->regmap, reg, writeval);
else
return regmap_read(dac->common->regmap, reg, readval);
}
static const struct iio_info stm32_dac_iio_info = {
.read_raw = stm32_dac_read_raw,
.write_raw = stm32_dac_write_raw,
.debugfs_reg_access = stm32_dac_debugfs_reg_access,
.driver_module = THIS_MODULE,
};
static const char * const stm32_dac_powerdown_modes[] = {
"three_state",
};
static int stm32_dac_get_powerdown_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
{
return 0;
}
static int stm32_dac_set_powerdown_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
unsigned int type)
{
return 0;
}
static ssize_t stm32_dac_read_powerdown(struct iio_dev *indio_dev,
uintptr_t private,
const struct iio_chan_spec *chan,
char *buf)
{
int ret = stm32_dac_is_enabled(indio_dev, chan->channel);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n", ret ? 0 : 1);
}
static ssize_t stm32_dac_write_powerdown(struct iio_dev *indio_dev,
uintptr_t private,
const struct iio_chan_spec *chan,
const char *buf, size_t len)
{
bool powerdown;
int ret;
ret = strtobool(buf, &powerdown);
if (ret)
return ret;
ret = stm32_dac_set_enable_state(indio_dev, chan->channel, !powerdown);
if (ret)
return ret;
return len;
}
static const struct iio_enum stm32_dac_powerdown_mode_en = {
.items = stm32_dac_powerdown_modes,
.num_items = ARRAY_SIZE(stm32_dac_powerdown_modes),
.get = stm32_dac_get_powerdown_mode,
.set = stm32_dac_set_powerdown_mode,
};
static const struct iio_chan_spec_ext_info stm32_dac_ext_info[] = {
{
.name = "powerdown",
.read = stm32_dac_read_powerdown,
.write = stm32_dac_write_powerdown,
.shared = IIO_SEPARATE,
},
IIO_ENUM("powerdown_mode", IIO_SEPARATE, &stm32_dac_powerdown_mode_en),
IIO_ENUM_AVAILABLE("powerdown_mode", &stm32_dac_powerdown_mode_en),
{},
};
#define STM32_DAC_CHANNEL(chan, name) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.output = 1, \
.channel = chan, \
.info_mask_separate = \
BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE), \
/* scan_index is always 0 as num_channels is 1 */ \
.scan_type = { \
.sign = 'u', \
.realbits = 12, \
.storagebits = 16, \
}, \
.datasheet_name = name, \
.ext_info = stm32_dac_ext_info \
}
static const struct iio_chan_spec stm32_dac_channels[] = {
STM32_DAC_CHANNEL(STM32_DAC_CHANNEL_1, "out1"),
STM32_DAC_CHANNEL(STM32_DAC_CHANNEL_2, "out2"),
};
static int stm32_dac_chan_of_init(struct iio_dev *indio_dev)
{
struct device_node *np = indio_dev->dev.of_node;
unsigned int i;
u32 channel;
int ret;
ret = of_property_read_u32(np, "reg", &channel);
if (ret) {
dev_err(&indio_dev->dev, "Failed to read reg property\n");
return ret;
}
for (i = 0; i < ARRAY_SIZE(stm32_dac_channels); i++) {
if (stm32_dac_channels[i].channel == channel)
break;
}
if (i >= ARRAY_SIZE(stm32_dac_channels)) {
dev_err(&indio_dev->dev, "Invalid st,dac-channel\n");
return -EINVAL;
}
indio_dev->channels = &stm32_dac_channels[i];
/*
* Expose only one channel here, as they can be used independently,
* with separate trigger. Then separate IIO devices are instantiated
* to manage this.
*/
indio_dev->num_channels = 1;
return 0;
};
static int stm32_dac_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct iio_dev *indio_dev;
struct stm32_dac *dac;
int ret;
if (!np)
return -ENODEV;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*dac));
if (!indio_dev)
return -ENOMEM;
platform_set_drvdata(pdev, indio_dev);
dac = iio_priv(indio_dev);
dac->common = dev_get_drvdata(pdev->dev.parent);
indio_dev->name = dev_name(&pdev->dev);
indio_dev->dev.parent = &pdev->dev;
indio_dev->dev.of_node = pdev->dev.of_node;
indio_dev->info = &stm32_dac_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = stm32_dac_chan_of_init(indio_dev);
if (ret < 0)
return ret;
return devm_iio_device_register(&pdev->dev, indio_dev);
}
static const struct of_device_id stm32_dac_of_match[] = {
{ .compatible = "st,stm32-dac", },
{},
};
MODULE_DEVICE_TABLE(of, stm32_dac_of_match);
static struct platform_driver stm32_dac_driver = {
.probe = stm32_dac_probe,
.driver = {
.name = "stm32-dac",
.of_match_table = stm32_dac_of_match,
},
};
module_platform_driver(stm32_dac_driver);
MODULE_ALIAS("platform:stm32-dac");
MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
MODULE_DESCRIPTION("STMicroelectronics STM32 DAC driver");
MODULE_LICENSE("GPL v2");
drivers/iio/gyro/mpu3050-i2c.c
View file @ d47e5382
......@@ -70,9 +70,8 @@ static int mpu3050_i2c_probe(struct i2c_client *client,
dev_err(&client->dev, "failed to allocate I2C mux\n");
else {
mpu3050->i2cmux->priv = mpu3050;
ret = i2c_mux_add_adapter(mpu3050->i2cmux, 0, 0, 0);
if (ret)
dev_err(&client->dev, "failed to add I2C mux\n");
/* Ignore failure, not critical */
i2c_mux_add_adapter(mpu3050->i2cmux, 0, 0, 0);
}
return 0;
......
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
View file @ d47e5382
......@@ -71,6 +71,7 @@ enum st_lsm6dsx_fifo_mode {
/**
* struct st_lsm6dsx_sensor - ST IMU sensor instance
* @name: Sensor name.
* @id: Sensor identifier.
* @hw: Pointer to instance of struct st_lsm6dsx_hw.
* @gain: Configured sensor sensitivity.
......@@ -83,6 +84,7 @@ enum st_lsm6dsx_fifo_mode {
* @ts: Latest timestamp from the interrupt handler.
*/
struct st_lsm6dsx_sensor {
char name[32];
enum st_lsm6dsx_sensor_id id;
struct st_lsm6dsx_hw *hw;
......@@ -133,7 +135,7 @@ struct st_lsm6dsx_hw {
#endif /* CONFIG_SPI_MASTER */
};
int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
const struct st_lsm6dsx_transfer_function *tf_ops);
int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor);
int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor);
......
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
View file @ d47e5382
......@@ -559,19 +559,11 @@ static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
{
struct device_node *np = hw->dev->of_node;
int err;
if (!np)
return -EINVAL;
err = of_property_read_u32(np, "st,drdy-int-pin", drdy_pin);
if (err == -ENODATA) {
/* if the property has not been specified use default value */
*drdy_pin = 1;
err = 0;
}
return err;
return of_property_read_u32(np, "st,drdy-int-pin", drdy_pin);
}
static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
......@@ -642,7 +634,8 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
}
static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
enum st_lsm6dsx_sensor_id id)
enum st_lsm6dsx_sensor_id id,
const char *name)
{
struct st_lsm6dsx_sensor *sensor;
struct iio_dev *iio_dev;
......@@ -666,27 +659,30 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
case ST_LSM6DSX_ID_ACC:
iio_dev->channels = st_lsm6dsx_acc_channels;
iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_acc_channels);
iio_dev->name = "lsm6dsx_accel";
iio_dev->info = &st_lsm6dsx_acc_info;
sensor->decimator_mask = ST_LSM6DSX_REG_ACC_DEC_MASK;
scnprintf(sensor->name, sizeof(sensor->name), "%s_accel",
name);
break;
case ST_LSM6DSX_ID_GYRO:
iio_dev->channels = st_lsm6dsx_gyro_channels;
iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_gyro_channels);
iio_dev->name = "lsm6dsx_gyro";
iio_dev->info = &st_lsm6dsx_gyro_info;
sensor->decimator_mask = ST_LSM6DSX_REG_GYRO_DEC_MASK;
scnprintf(sensor->name, sizeof(sensor->name), "%s_gyro",
name);
break;
default:
return NULL;
}
iio_dev->name = sensor->name;
return iio_dev;
}
int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
const struct st_lsm6dsx_transfer_function *tf_ops)
{
struct st_lsm6dsx_hw *hw;
......@@ -710,7 +706,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
return err;
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
hw->iio_devs[i] = st_lsm6dsx_alloc_iiodev(hw, i);
hw->iio_devs[i] = st_lsm6dsx_alloc_iiodev(hw, i, name);
if (!hw->iio_devs[i])
return -ENOMEM;
}
......
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
View file @ d47e5382
......@@ -61,7 +61,7 @@ static int st_lsm6dsx_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
return st_lsm6dsx_probe(&client->dev, client->irq,
(int)id->driver_data,
(int)id->driver_data, id->name,
&st_lsm6dsx_transfer_fn);
}
......
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
View file @ d47e5382
......@@ -78,7 +78,7 @@ static int st_lsm6dsx_spi_probe(struct spi_device *spi)
const struct spi_device_id *id = spi_get_device_id(spi);
return st_lsm6dsx_probe(&spi->dev, spi->irq,
(int)id->driver_data,
(int)id->driver_data, id->name,
&st_lsm6dsx_transfer_fn);
}
......
drivers/iio/light/apds9960.c
View file @ d47e5382
......@@ -1112,6 +1112,8 @@ static int apds9960_runtime_resume(struct device *dev)
#endif
static const struct dev_pm_ops apds9960_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(apds9960_runtime_suspend,
apds9960_runtime_resume, NULL)
};
......
drivers/iio/trigger/stm32-timer-trigger.c
View file @ d47e5382
......@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#define MAX_TRIGGERS 6
#define MAX_VALIDS 5
/* List the triggers created by each timer */
static const void *triggers_table[][MAX_TRIGGERS] = {
......@@ -32,12 +33,29 @@ static const void *triggers_table[][MAX_TRIGGERS] = {
{ TIM12_TRGO, TIM12_CH1, TIM12_CH2,},
};
/* List the triggers accepted by each timer */
static const void *valids_table[][MAX_VALIDS] = {
{ TIM5_TRGO, TIM2_TRGO, TIM3_TRGO, TIM4_TRGO,},
{ TIM1_TRGO, TIM8_TRGO, TIM3_TRGO, TIM4_TRGO,},
{ TIM1_TRGO, TIM2_TRGO, TIM5_TRGO, TIM4_TRGO,},
{ TIM1_TRGO, TIM2_TRGO, TIM3_TRGO, TIM8_TRGO,},
{ TIM2_TRGO, TIM3_TRGO, TIM4_TRGO, TIM8_TRGO,},
{ }, /* timer 6 */
{ }, /* timer 7 */
{ TIM1_TRGO, TIM2_TRGO, TIM4_TRGO, TIM5_TRGO,},
{ TIM2_TRGO, TIM3_TRGO,},
{ }, /* timer 10 */
{ }, /* timer 11 */
{ TIM4_TRGO, TIM5_TRGO,},
};
struct stm32_timer_trigger {
struct device *dev;
struct regmap *regmap;
struct clk *clk;
u32 max_arr;
const void *triggers;
const void *valids;
};
static int stm32_timer_start(struct stm32_timer_trigger *priv,
......@@ -180,8 +198,7 @@ static ssize_t stm32_tt_show_master_mode(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
struct stm32_timer_trigger *priv = dev_get_drvdata(dev);
u32 cr2;
regmap_read(priv->regmap, TIM_CR2, &cr2);
......@@ -194,8 +211,7 @@ static ssize_t stm32_tt_store_master_mode(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
struct stm32_timer_trigger *priv = dev_get_drvdata(dev);
int i;
for (i = 0; i < ARRAY_SIZE(master_mode_table); i++) {
......@@ -275,6 +291,286 @@ static int stm32_setup_iio_triggers(struct stm32_timer_trigger *priv)
return 0;
}
static int stm32_counter_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
{
u32 cnt;
regmap_read(priv->regmap, TIM_CNT, &cnt);
*val = cnt;
return IIO_VAL_INT;
}
case IIO_CHAN_INFO_SCALE:
{
u32 smcr;
regmap_read(priv->regmap, TIM_SMCR, &smcr);
smcr &= TIM_SMCR_SMS;
*val = 1;
*val2 = 0;
/* in quadrature case scale = 0.25 */
if (smcr == 3)
*val2 = 2;
return IIO_VAL_FRACTIONAL_LOG2;
}
}
return -EINVAL;
}
static int stm32_counter_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
regmap_write(priv->regmap, TIM_CNT, val);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
/* fixed scale */
return -EINVAL;
}
return -EINVAL;
}
static const struct iio_info stm32_trigger_info = {
.driver_module = THIS_MODULE,
.read_raw = stm32_counter_read_raw,
.write_raw = stm32_counter_write_raw
};
static const char *const stm32_enable_modes[] = {
"always",
"gated",
"triggered",
};
static int stm32_enable_mode2sms(int mode)
{
switch (mode) {
case 0:
return 0;
case 1:
return 5;
case 2:
return 6;
}
return -EINVAL;
}
static int stm32_set_enable_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
unsigned int mode)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
int sms = stm32_enable_mode2sms(mode);
if (sms < 0)
return sms;
regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms);
return 0;
}
static int stm32_sms2enable_mode(int mode)
{
switch (mode) {
case 0:
return 0;
case 5:
return 1;
case 6:
return 2;
}
return -EINVAL;
}
static int stm32_get_enable_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
u32 smcr;
regmap_read(priv->regmap, TIM_SMCR, &smcr);
smcr &= TIM_SMCR_SMS;
return stm32_sms2enable_mode(smcr);
}
static const struct iio_enum stm32_enable_mode_enum = {
.items = stm32_enable_modes,
.num_items = ARRAY_SIZE(stm32_enable_modes),
.set = stm32_set_enable_mode,
.get = stm32_get_enable_mode
};
static const char *const stm32_quadrature_modes[] = {
"channel_A",
"channel_B",
"quadrature",
};
static int stm32_set_quadrature_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
unsigned int mode)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, mode + 1);
return 0;
}
static int stm32_get_quadrature_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
u32 smcr;
regmap_read(priv->regmap, TIM_SMCR, &smcr);
smcr &= TIM_SMCR_SMS;
return smcr - 1;
}
static const struct iio_enum stm32_quadrature_mode_enum = {
.items = stm32_quadrature_modes,
.num_items = ARRAY_SIZE(stm32_quadrature_modes),
.set = stm32_set_quadrature_mode,
.get = stm32_get_quadrature_mode
};
static const char *const stm32_count_direction_states[] = {
"up",
"down"
};
static int stm32_set_count_direction(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
unsigned int mode)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_DIR, mode);
return 0;
}
static int stm32_get_count_direction(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
u32 cr1;
regmap_read(priv->regmap, TIM_CR1, &cr1);
return (cr1 & TIM_CR1_DIR);
}
static const struct iio_enum stm32_count_direction_enum = {
.items = stm32_count_direction_states,
.num_items = ARRAY_SIZE(stm32_count_direction_states),
.set = stm32_set_count_direction,
.get = stm32_get_count_direction
};
static ssize_t stm32_count_get_preset(struct iio_dev *indio_dev,
uintptr_t private,
const struct iio_chan_spec *chan,
char *buf)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
u32 arr;
regmap_read(priv->regmap, TIM_ARR, &arr);
return snprintf(buf, PAGE_SIZE, "%u\n", arr);
}
static ssize_t stm32_count_set_preset(struct iio_dev *indio_dev,
uintptr_t private,
const struct iio_chan_spec *chan,
const char *buf, size_t len)
{
struct stm32_timer_trigger *priv = iio_priv(indio_dev);
unsigned int preset;
int ret;
ret = kstrtouint(buf, 0, &preset);
if (ret)
return ret;
regmap_write(priv->regmap, TIM_ARR, preset);
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, TIM_CR1_ARPE);
return len;
}
static const struct iio_chan_spec_ext_info stm32_trigger_count_info[] = {
{
.name = "preset",
.shared = IIO_SEPARATE,
.read = stm32_count_get_preset,
.write = stm32_count_set_preset
},
IIO_ENUM("count_direction", IIO_SEPARATE, &stm32_count_direction_enum),
IIO_ENUM_AVAILABLE("count_direction", &stm32_count_direction_enum),
IIO_ENUM("quadrature_mode", IIO_SEPARATE, &stm32_quadrature_mode_enum),
IIO_ENUM_AVAILABLE("quadrature_mode", &stm32_quadrature_mode_enum),
IIO_ENUM("enable_mode", IIO_SEPARATE, &stm32_enable_mode_enum),
IIO_ENUM_AVAILABLE("enable_mode", &stm32_enable_mode_enum),
{}
};
static const struct iio_chan_spec stm32_trigger_channel = {
.type = IIO_COUNT,
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
.ext_info = stm32_trigger_count_info,
.indexed = 1
};
static struct stm32_timer_trigger *stm32_setup_counter_device(struct device *dev)
{
struct iio_dev *indio_dev;
int ret;
indio_dev = devm_iio_device_alloc(dev,
sizeof(struct stm32_timer_trigger));
if (!indio_dev)
return NULL;
indio_dev->name = dev_name(dev);
indio_dev->dev.parent = dev;
indio_dev->info = &stm32_trigger_info;
indio_dev->num_channels = 1;
indio_dev->channels = &stm32_trigger_channel;
indio_dev->dev.of_node = dev->of_node;
ret = devm_iio_device_register(dev, indio_dev);
if (ret)
return NULL;
return iio_priv(indio_dev);
}
/**
* is_stm32_timer_trigger
* @trig: trigger to be checked
......@@ -299,10 +595,15 @@ static int stm32_timer_trigger_probe(struct platform_device *pdev)
if (of_property_read_u32(dev->of_node, "reg", &index))
return -EINVAL;
if (index >= ARRAY_SIZE(triggers_table))
if (index >= ARRAY_SIZE(triggers_table) ||
index >= ARRAY_SIZE(valids_table))
return -EINVAL;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
/* Create an IIO device only if we have triggers to be validated */
if (*valids_table[index])
priv = stm32_setup_counter_device(dev);
else
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
......@@ -312,6 +613,7 @@ static int stm32_timer_trigger_probe(struct platform_device *pdev)
priv->clk = ddata->clk;
priv->max_arr = ddata->max_arr;
priv->triggers = triggers_table[index];
priv->valids = valids_table[index];
ret = stm32_setup_iio_triggers(priv);
if (ret)
......
drivers/staging/iio/accel/adis16203.c
View file @ d47e5382
......@@ -205,9 +205,8 @@ static int adis16203_read_raw(struct iio_dev *indio_dev,
bits = 14;
addr = adis16203_addresses[chan->scan_index];
ret = adis_read_reg_16(st, addr, &val16);
if (ret) {
if (ret)
return ret;
}
val16 &= (1 << bits) - 1;
val16 = (s16)(val16 << (16 - bits)) >> (16 - bits);
*val = val16;
......
drivers/staging/iio/impedance-analyzer/ad5933.c
View file @ d47e5382
......@@ -98,6 +98,7 @@ struct ad5933_state {
struct i2c_client *client;
struct regulator *reg;
struct delayed_work work;
struct mutex lock; /* Protect sensor state */
unsigned long mclk_hz;
unsigned char ctrl_hb;
unsigned char ctrl_lb;
......@@ -306,9 +307,11 @@ static ssize_t ad5933_show_frequency(struct device *dev,
u8 d8[4];
} dat;
mutex_lock(&indio_dev->mlock);
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
ret = ad5933_i2c_read(st->client, this_attr->address, 3, &dat.d8[1]);
mutex_unlock(&indio_dev->mlock);
iio_device_release_direct_mode(indio_dev);
if (ret < 0)
return ret;
......@@ -338,9 +341,11 @@ static ssize_t ad5933_store_frequency(struct device *dev,
if (val > AD5933_MAX_OUTPUT_FREQ_Hz)
return -EINVAL;
mutex_lock(&indio_dev->mlock);
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
ret = ad5933_set_freq(st, this_attr->address, val);
mutex_unlock(&indio_dev->mlock);
iio_device_release_direct_mode(indio_dev);
return ret ? ret : len;
}
......@@ -364,7 +369,7 @@ static ssize_t ad5933_show(struct device *dev,
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
int ret = 0, len = 0;
mutex_lock(&indio_dev->mlock);
mutex_lock(&st->lock);
switch ((u32)this_attr->address) {
case AD5933_OUT_RANGE:
len = sprintf(buf, "%u\n",
......@@ -393,7 +398,7 @@ static ssize_t ad5933_show(struct device *dev,
ret = -EINVAL;
}
mutex_unlock(&indio_dev->mlock);
mutex_unlock(&st->lock);
return ret ? ret : len;
}
......@@ -415,7 +420,10 @@ static ssize_t ad5933_store(struct device *dev,
return ret;
}
mutex_lock(&indio_dev->mlock);
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
mutex_lock(&st->lock);
switch ((u32)this_attr->address) {
case AD5933_OUT_RANGE:
ret = -EINVAL;
......@@ -465,7 +473,8 @@ static ssize_t ad5933_store(struct device *dev,
ret = -EINVAL;
}
mutex_unlock(&indio_dev->mlock);
mutex_unlock(&st->lock);
iio_device_release_direct_mode(indio_dev);
return ret ? ret : len;
}
......@@ -532,11 +541,9 @@ static int ad5933_read_raw(struct iio_dev *indio_dev,
switch (m) {
case IIO_CHAN_INFO_RAW:
mutex_lock(&indio_dev->mlock);
if (iio_buffer_enabled(indio_dev)) {
ret = -EBUSY;
goto out;
}
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
ret = ad5933_cmd(st, AD5933_CTRL_MEASURE_TEMP);
if (ret < 0)
goto out;
......@@ -549,7 +556,7 @@ static int ad5933_read_raw(struct iio_dev *indio_dev,
2, (u8 *)&dat);
if (ret < 0)
goto out;
mutex_unlock(&indio_dev->mlock);
iio_device_release_direct_mode(indio_dev);
*val = sign_extend32(be16_to_cpu(dat), 13);
return IIO_VAL_INT;
......@@ -561,7 +568,7 @@ static int ad5933_read_raw(struct iio_dev *indio_dev,
return -EINVAL;
out:
mutex_unlock(&indio_dev->mlock);
iio_device_release_direct_mode(indio_dev);
return ret;
}
......@@ -657,18 +664,17 @@ static void ad5933_work(struct work_struct *work)
unsigned char status;
int ret;
mutex_lock(&indio_dev->mlock);
if (st->state == AD5933_CTRL_INIT_START_FREQ) {
/* start sweep */
ad5933_cmd(st, AD5933_CTRL_START_SWEEP);
st->state = AD5933_CTRL_START_SWEEP;
schedule_delayed_work(&st->work, st->poll_time_jiffies);
goto out;
return;
}
ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status);
if (ret)
goto out;
return;
if (status & AD5933_STAT_DATA_VALID) {
int scan_count = bitmap_weight(indio_dev->active_scan_mask,
......@@ -678,7 +684,7 @@ static void ad5933_work(struct work_struct *work)
AD5933_REG_REAL_DATA : AD5933_REG_IMAG_DATA,
scan_count * 2, (u8 *)buf);
if (ret)
goto out;
return;
if (scan_count == 2) {
val[0] = be16_to_cpu(buf[0]);
......@@ -690,7 +696,7 @@ static void ad5933_work(struct work_struct *work)
} else {
/* no data available - try again later */
schedule_delayed_work(&st->work, st->poll_time_jiffies);
goto out;
return;
}
if (status & AD5933_STAT_SWEEP_DONE) {
......@@ -703,8 +709,6 @@ static void ad5933_work(struct work_struct *work)
ad5933_cmd(st, AD5933_CTRL_INC_FREQ);
schedule_delayed_work(&st->work, st->poll_time_jiffies);
}
out:
mutex_unlock(&indio_dev->mlock);
}
static int ad5933_probe(struct i2c_client *client,
......@@ -723,6 +727,8 @@ static int ad5933_probe(struct i2c_client *client,
i2c_set_clientdata(client, indio_dev);
st->client = client;
mutex_init(&st->lock);
if (!pdata)
pdata = &ad5933_default_pdata;
......
drivers/staging/iio/meter/ade7759.c
View file @ d47e5382
......@@ -279,49 +279,49 @@ static int ade7759_reset(struct device *dev)
}
static IIO_DEV_ATTR_AENERGY(ade7759_read_40bit, ADE7759_AENERGY);
static IIO_DEV_ATTR_CFDEN(S_IWUSR | S_IRUGO,
static IIO_DEV_ATTR_CFDEN(0644,
ade7759_read_16bit,
ade7759_write_16bit,
ADE7759_CFDEN);
static IIO_DEV_ATTR_CFNUM(S_IWUSR | S_IRUGO,
static IIO_DEV_ATTR_CFNUM(0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_CFNUM);
static IIO_DEV_ATTR_CHKSUM(ade7759_read_8bit, ADE7759_CHKSUM);
static IIO_DEV_ATTR_PHCAL(S_IWUSR | S_IRUGO,
static IIO_DEV_ATTR_PHCAL(0644,
ade7759_read_16bit,
ade7759_write_16bit,
ADE7759_PHCAL);
static IIO_DEV_ATTR_APOS(S_IWUSR | S_IRUGO,
static IIO_DEV_ATTR_APOS(0644,
ade7759_read_16bit,
ade7759_write_16bit,
ADE7759_APOS);
static IIO_DEV_ATTR_SAGCYC(S_IWUSR | S_IRUGO,
static IIO_DEV_ATTR_SAGCYC(0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_SAGCYC);
static IIO_DEV_ATTR_SAGLVL(S_IWUSR | S_IRUGO,
static IIO_DEV_ATTR_SAGLVL(0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_SAGLVL);
static IIO_DEV_ATTR_LINECYC(S_IWUSR | S_IRUGO,
static IIO_DEV_ATTR_LINECYC(0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_LINECYC);
static IIO_DEV_ATTR_LENERGY(ade7759_read_40bit, ADE7759_LENERGY);
static IIO_DEV_ATTR_PGA_GAIN(S_IWUSR | S_IRUGO,
static IIO_DEV_ATTR_PGA_GAIN(0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_GAIN);
static IIO_DEV_ATTR_ACTIVE_POWER_GAIN(S_IWUSR | S_IRUGO,
static IIO_DEV_ATTR_ACTIVE_POWER_GAIN(0644,
ade7759_read_16bit,
ade7759_write_16bit,
ADE7759_APGAIN);
static IIO_DEV_ATTR_CH_OFF(1, S_IWUSR | S_IRUGO,
static IIO_DEV_ATTR_CH_OFF(1, 0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_CH1OS);
static IIO_DEV_ATTR_CH_OFF(2, S_IWUSR | S_IRUGO,
static IIO_DEV_ATTR_CH_OFF(2, 0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_CH2OS);
......@@ -458,7 +458,7 @@ static IIO_DEV_ATTR_TEMP_RAW(ade7759_read_8bit);
static IIO_CONST_ATTR(in_temp_offset, "70 C");
static IIO_CONST_ATTR(in_temp_scale, "1 C");
static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
static IIO_DEV_ATTR_SAMP_FREQ(0644,
ade7759_read_frequency,
ade7759_write_frequency);
......
include/linux/mfd/stm32-timers.h
View file @ d47e5382
......@@ -21,6 +21,7 @@
#define TIM_CCMR1 0x18 /* Capt/Comp 1 Mode Reg */
#define TIM_CCMR2 0x1C /* Capt/Comp 2 Mode Reg */
#define TIM_CCER 0x20 /* Capt/Comp Enable Reg */
#define TIM_CNT 0x24 /* Counter */
#define TIM_PSC 0x28 /* Prescaler */
#define TIM_ARR 0x2c /* Auto-Reload Register */
#define TIM_CCR1 0x34 /* Capt/Comp Register 1 */
......@@ -30,6 +31,7 @@
#define TIM_BDTR 0x44 /* Break and Dead-Time Reg */
#define TIM_CR1_CEN BIT(0) /* Counter Enable */
#define TIM_CR1_DIR BIT(4) /* Counter Direction */
#define TIM_CR1_ARPE BIT(7) /* Auto-reload Preload Ena */
#define TIM_CR2_MMS (BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */
#define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */
......
include/linux/mfd/sun4i-gpadc.h
View file @ d47e5382
......@@ -38,6 +38,10 @@
#define SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(x) (GENMASK(3, 0) & BIT(x))
#define SUN6I_GPADC_CTRL1_ADC_CHAN_MASK GENMASK(3, 0)
/* TP_CTRL1 bits for sun8i SoCs */
#define SUN8I_GPADC_CTRL1_CHOP_TEMP_EN BIT(8)
#define SUN8I_GPADC_CTRL1_GPADC_CALI_EN BIT(7)
#define SUN4I_GPADC_CTRL2 0x08
#define SUN4I_GPADC_CTRL2_TP_SENSITIVE_ADJUST(x) ((GENMASK(3, 0) & (x)) << 28)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7