brcmfmac: determine the wiphy->bands property correctly.

Use information from the device to determine the bands property
of the wiphy object. After this change the support of 80211n is
correctly presented in the bands property.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/brcm80211/brcmfmac/dhd.h

@@ -72,6 +72,7 @@
 #define BRCMF_C_SET_WSEC			134
 #define BRCMF_C_GET_PHY_NOISE			135
 #define BRCMF_C_GET_BSS_INFO			136
+#define BRCMF_C_GET_BANDLIST			140
 #define BRCMF_C_SET_SCB_TIMEOUT			158
 #define BRCMF_C_GET_PHYLIST			180
 #define BRCMF_C_SET_SCAN_CHANNEL_TIME		185
@@ -475,6 +476,11 @@ struct brcmf_sta_info_le {
 	__le32	rx_decrypt_failures;	/* # of packet decrypted failed */
 };
 
+struct brcmf_chanspec_list {
+	__le32	count;		/* # of entries */
+	__le32	element[1];	/* variable length uint32 list */
+};
+
 /*
  * WLC_E_PROBRESP_MSG
  * WLC_E_P2P_PROBREQ_MSG

drivers/net/wireless/brcm80211/include/brcmu_wifi.h

@@ -32,8 +32,9 @@
 #define CH_20MHZ_APART			4
 #define CH_10MHZ_APART			2
 #define CH_5MHZ_APART			1 /* 2G band channels are 5 Mhz apart */
+#define CH_MIN_2G_CHANNEL		1
 #define CH_MAX_2G_CHANNEL		14	/* Max channel in 2G band */
-#define BRCM_MAX_2G_CHANNEL	CH_MAX_2G_CHANNEL	/* legacy define */
+#define CH_MIN_5G_CHANNEL		34
 
 /* bandstate array indices */
 #define BAND_2G_INDEX		0	/* wlc->bandstate[x] index */
@@ -60,6 +61,7 @@
 #define WL_CHANSPEC_BW_10		0x0400
 #define WL_CHANSPEC_BW_20		0x0800
 #define WL_CHANSPEC_BW_40		0x0C00
+#define WL_CHANSPEC_BW_80		0x2000
 
 #define WL_CHANSPEC_BAND_MASK		0xf000
 #define WL_CHANSPEC_BAND_SHIFT		12
@@ -67,6 +69,25 @@
 #define WL_CHANSPEC_BAND_2G		0x2000
 #define INVCHANSPEC			255
 
+#define WL_CHAN_VALID_HW		(1 << 0) /* valid with current HW */
+#define WL_CHAN_VALID_SW		(1 << 1) /* valid with country sett. */
+#define WL_CHAN_BAND_5G			(1 << 2) /* 5GHz-band channel */
+#define WL_CHAN_RADAR			(1 << 3) /* radar sensitive  channel */
+#define WL_CHAN_INACTIVE		(1 << 4) /* inactive due to radar */
+#define WL_CHAN_PASSIVE			(1 << 5) /* channel in passive mode */
+#define WL_CHAN_RESTRICTED		(1 << 6) /* restricted use channel */
+
+/* values for band specific 40MHz capabilities  */
+#define WLC_N_BW_20ALL			0
+#define WLC_N_BW_40ALL			1
+#define WLC_N_BW_20IN2G_40IN5G		2
+
+/* band types */
+#define	WLC_BAND_AUTO			0	/* auto-select */
+#define	WLC_BAND_5G			1	/* 5 Ghz */
+#define	WLC_BAND_2G			2	/* 2.4 Ghz */
+#define	WLC_BAND_ALL			3	/* all bands */
+
 #define CHSPEC_CHANNEL(chspec)	((u8)((chspec) & WL_CHANSPEC_CHAN_MASK))
 #define CHSPEC_BAND(chspec)	((chspec) & WL_CHANSPEC_BAND_MASK)
 
@@ -79,10 +100,11 @@
 #define CHSPEC_IS20(chspec) \
 	(((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20)
 
-#ifndef CHSPEC_IS40
 #define CHSPEC_IS40(chspec) \
 	(((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40)
-#endif
+
+#define CHSPEC_IS80(chspec) \
+	(((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_80)
 
 #define CHSPEC_IS5G(chspec) \
 	(((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_5G)