Commit d49597fd authored by Thomas Gleixner's avatar Thomas Gleixner

x86/cpu: Deal with broken firmware (VMWare/XEN)

Both ACPI and MP specifications require that the APIC id in the respective
tables must be the same as the APIC id in CPUID.

The kernel retrieves the physical package id from the APIC id during the
ACPI/MP table scan and builds the physical to logical package map. The
physical package id which is used after a CPU comes up is retrieved from
CPUID. So we rely on ACPI/MP tables and CPUID agreeing in that respect.

There exist VMware and XEN implementations which violate the spec. As a
result the physical to logical package map, which relies on the ACPI/MP
tables does not work on those systems, because the CPUID initialized
physical package id does not match the firmware id. This causes system
crashes and malfunction due to invalid package mappings.

The only way to cure this is to sanitize the physical package id after the
CPUID enumeration and yell when the APIC ids are different. Fix up the
initial APIC id, which is fine as it is only used printout purposes.

If the physical package IDs differ yell and use the package information
from the ACPI/MP tables so the existing logical package map just works.

Chas provided the resulting dmesg output for his affected 4 virtual
sockets, 1 core per socket VM:

[Firmware Bug]: CPU1: APIC id mismatch. Firmware: 1 CPUID: 2
[Firmware Bug]: CPU1: Using firmware package id 1 instead of 2
....

Reported-and-tested-by: "Charles (Chas) Williams" <ciwillia@brocade.com>,
Reported-by: default avatarM. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: #4.6+ <stable@vger,kernel.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611091613540.3501@nanosSigned-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent b0b6e868
...@@ -978,6 +978,35 @@ static void x86_init_cache_qos(struct cpuinfo_x86 *c) ...@@ -978,6 +978,35 @@ static void x86_init_cache_qos(struct cpuinfo_x86 *c)
} }
} }
/*
* The physical to logical package id mapping is initialized from the
* acpi/mptables information. Make sure that CPUID actually agrees with
* that.
*/
static void sanitize_package_id(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
unsigned int pkg, apicid, cpu = smp_processor_id();
apicid = apic->cpu_present_to_apicid(cpu);
pkg = apicid >> boot_cpu_data.x86_coreid_bits;
if (apicid != c->initial_apicid) {
pr_err(FW_BUG "CPU%u: APIC id mismatch. Firmware: %x CPUID: %x\n",
cpu, apicid, c->initial_apicid);
c->initial_apicid = apicid;
}
if (pkg != c->phys_proc_id) {
pr_err(FW_BUG "CPU%u: Using firmware package id %u instead of %u\n",
cpu, pkg, c->phys_proc_id);
c->phys_proc_id = pkg;
}
c->logical_proc_id = topology_phys_to_logical_pkg(pkg);
#else
c->logical_proc_id = 0;
#endif
}
/* /*
* This does the hard work of actually picking apart the CPU stuff... * This does the hard work of actually picking apart the CPU stuff...
*/ */
...@@ -1103,8 +1132,7 @@ static void identify_cpu(struct cpuinfo_x86 *c) ...@@ -1103,8 +1132,7 @@ static void identify_cpu(struct cpuinfo_x86 *c)
#ifdef CONFIG_NUMA #ifdef CONFIG_NUMA
numa_add_cpu(smp_processor_id()); numa_add_cpu(smp_processor_id());
#endif #endif
/* The boot/hotplug time assigment got cleared, restore it */ sanitize_package_id(c);
c->logical_proc_id = topology_phys_to_logical_pkg(c->phys_proc_id);
} }
/* /*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment