phy: ti: tusb1210: Don't check for write errors when powering on

On some platforms, like Intel Merrifield, the writing values during power on
may timeout:

   tusb1210 dwc3.0.auto.ulpi: error -110 writing val 0x41 to reg 0x80
   phy phy-dwc3.0.auto.ulpi.0: phy poweron failed --> -110
   dwc3 dwc3.0.auto: error -ETIMEDOUT: failed to initialize core
   dwc3: probe of dwc3.0.auto failed with error -110

which effectively fails the probe of the USB controller.
Drop the check as it was before the culprit commit (see Fixes tag).

Fixes: 09a35126 ("phy: ti: tusb1210: Improve ulpi_read()/_write() error checking")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Link: https://lore.kernel.org/r/20220613160848.82746-1-andriy.shevchenko@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/phy/ti/phy-tusb1210.c

@@ -105,8 +105,9 @@ static int tusb1210_power_on(struct phy *phy)
 	msleep(TUSB1210_RESET_TIME_MS);
 
 	/* Restore the optional eye diagram optimization value */
-	return tusb1210_ulpi_write(tusb, TUSB1210_VENDOR_SPECIFIC2,
-				   tusb->vendor_specific2);
+	tusb1210_ulpi_write(tusb, TUSB1210_VENDOR_SPECIFIC2, tusb->vendor_specific2);
+
+	return 0;
 }
 
 static int tusb1210_power_off(struct phy *phy)