Commit d4bc99b9 authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Paul Mundt

ARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMI

Current AP4 FSI set_rate function used bogus clock process
which didn't care enable/disable and clk->usecound.
To solve this issue, this patch also modify FSI driver to call
set_rate with enough options.
This patch modify it.
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent e8ee13a8
......@@ -567,40 +567,72 @@ static struct platform_device *qhd_devices[] __initdata = {
/* FSI */
#define IRQ_FSI evt2irq(0x1840)
static int __fsi_set_rate(struct clk *clk, long rate, int enable)
{
int ret = 0;
if (rate <= 0)
return ret;
static int fsi_set_rate(int is_porta, int rate)
if (enable) {
ret = clk_set_rate(clk, clk_round_rate(clk, rate));
if (0 == ret)
ret = clk_enable(clk);
} else {
clk_disable(clk);
}
return ret;
}
static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
{
struct clk *fsib_clk;
struct clk *fdiv_clk = &sh7372_fsidivb_clk;
long fsib_rate = 0;
long fdiv_rate = 0;
int ackmd_bpfmd;
int ret;
/* set_rate is not needed if port A */
if (is_porta)
return 0;
fsib_clk = clk_get(NULL, "fsib_clk");
if (IS_ERR(fsib_clk))
return -EINVAL;
switch (rate) {
case 44100:
clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
fsib_rate = rate * 256;
ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
break;
case 48000:
clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
fsib_rate = 85428000; /* around 48kHz x 256 x 7 */
fdiv_rate = rate * 256;
ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
break;
default:
pr_err("unsupported rate in FSI2 port B\n");
ret = -EINVAL;
break;
return -EINVAL;
}
/* FSI B setting */
fsib_clk = clk_get(dev, "ickb");
if (IS_ERR(fsib_clk))
return -EIO;
ret = __fsi_set_rate(fsib_clk, fsib_rate, enable);
clk_put(fsib_clk);
if (ret < 0)
return ret;
return ret;
/* FSI DIV setting */
ret = __fsi_set_rate(fdiv_clk, fdiv_rate, enable);
if (ret < 0) {
/* disable FSI B */
if (enable)
__fsi_set_rate(fsib_clk, fsib_rate, 0);
return ret;
}
return ackmd_bpfmd;
}
static struct sh_fsi_platform_info fsi_info = {
......
......@@ -471,7 +471,7 @@ static int fsidiv_set_rate(struct clk *clk,
return -ENOENT;
__raw_writel(idx << 16, clk->mapping->base);
return fsidiv_enable(clk);
return 0;
}
static struct clk_ops fsidiv_clk_ops = {
......
......@@ -85,7 +85,9 @@
* ACK_MD (FSI2)
* CKG1 (FSI)
*
* err: return value < 0
* err : return value < 0
* no change : return value == 0
* change xMD : return value > 0
*
* 0x-00000AB
*
......@@ -111,7 +113,7 @@
struct sh_fsi_platform_info {
unsigned long porta_flags;
unsigned long portb_flags;
int (*set_rate)(int is_porta, int rate); /* for master mode */
int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
};
#endif /* __SOUND_FSI_H */
......@@ -132,6 +132,8 @@ struct fsi_priv {
struct fsi_stream playback;
struct fsi_stream capture;
long rate;
u32 mst_ctrl;
};
......@@ -854,10 +856,17 @@ static void fsi_dai_shutdown(struct snd_pcm_substream *substream,
{
struct fsi_priv *fsi = fsi_get_priv(substream);
int is_play = fsi_is_play(substream);
struct fsi_master *master = fsi_get_master(fsi);
int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
fsi_irq_disable(fsi, is_play);
fsi_clk_ctrl(fsi, 0);
set_rate = master->info->set_rate;
if (set_rate && fsi->rate)
set_rate(dai->dev, fsi_is_port_a(fsi), fsi->rate, 0);
fsi->rate = 0;
pm_runtime_put_sync(dai->dev);
}
......@@ -891,9 +900,10 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
{
struct fsi_priv *fsi = fsi_get_priv(substream);
struct fsi_master *master = fsi_get_master(fsi);
int (*set_rate)(int is_porta, int rate) = master->info->set_rate;
int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
int fsi_ver = master->core->ver;
int is_play = fsi_is_play(substream);
long rate = params_rate(params);
int ret;
/* if slave mode, set_rate is not needed */
......@@ -901,10 +911,15 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
return 0;
/* it is error if no set_rate */
set_rate = master->info->set_rate;
if (!set_rate)
return -EIO;
ret = set_rate(fsi_is_port_a(fsi), params_rate(params));
ret = set_rate(dai->dev, fsi_is_port_a(fsi), rate, 1);
if (ret < 0) /* error */
return ret;
fsi->rate = rate;
if (ret > 0) {
u32 data = 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment