Commit d4ca23b1 authored by Pierre Willenbrock's avatar Pierre Willenbrock Committed by Mauro Carvalho Chehab

V4L/DVB (5459): M920x: add support for Anubis Electronics / MSI Digi Vox Mini II

Add support for Anubis Electronics "Lifeview" (USB-ID: 0x10fd:0x1513)
Signed-off-by: default avatarPierre Willenbrock <pierre@pirsoft.de>
Signed-off-by: default avatarMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 08cdf94c
......@@ -13,6 +13,7 @@
#define USB_VID_ADSTECH 0x06e1
#define USB_VID_ALCOR_MICRO 0x058f
#define USB_VID_ANCHOR 0x0547
#define USB_VID_ANUBIS_ELECTRONIC 0x10fd
#define USB_VID_AVERMEDIA 0x07ca
#define USB_VID_COMPRO 0x185b
#define USB_VID_COMPRO_UNK 0x145f
......@@ -140,6 +141,7 @@
#define USB_PID_GENPIX_8PSK_COLD 0x0200
#define USB_PID_GENPIX_8PSK_WARM 0x0201
#define USB_PID_SIGMATEK_DVB_110 0x6610
#define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513
#endif
......@@ -14,6 +14,8 @@
#include "mt352.h"
#include "mt352_priv.h"
#include "qt1010.h"
#include "tda1004x.h"
#include "tda827x.h"
/* debug */
static int dvb_usb_m920x_debug;
......@@ -414,8 +416,40 @@ static int megasky_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
return 0;
}
static struct tda1004x_config digivox_tda10046_config = {
.demod_address = 0x08,
.invert = 0,
.invert_oclk = 0,
.ts_mode = TDA10046_TS_SERIAL,
.xtal_freq = TDA10046_XTAL_16M,
.if_freq = TDA10046_FREQ_045,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GPTRI,
.request_firmware = NULL,
};
static int digivox_tda10046_frontend_attach(struct dvb_usb_adapter *adap)
{
deb_rc("digivox_tda10046_frontend_attach!\n");
if ((adap->fe = dvb_attach(tda10046_attach, &digivox_tda10046_config,
&adap->dev->i2c_adap)) == NULL)
return -EIO;
return 0;
}
static int digivox_tda8275_tuner_attach(struct dvb_usb_adapter *adap)
{
if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap,
NULL) == NULL)
return -ENODEV;
return 0;
}
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties megasky_properties;
static struct dvb_usb_device_properties digivox_mini_ii_properties;
static int m920x_probe(struct usb_interface *intf,
const struct usb_device_id *id)
......@@ -426,7 +460,8 @@ static int m920x_probe(struct usb_interface *intf,
deb_rc("Probed!\n");
if ((ret = dvb_usb_device_init(intf, &megasky_properties, THIS_MODULE, &d)) == 0)
if (((ret = dvb_usb_device_init(intf, &megasky_properties, THIS_MODULE, &d)) == 0) ||
((ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties, THIS_MODULE, &d)) == 0))
goto found;
return ret;
......@@ -451,6 +486,8 @@ static int m920x_probe(struct usb_interface *intf,
static struct usb_device_id m920x_table [] = {
{ USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580) },
{ USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
USB_PID_MSI_DIGI_VOX_MINI_II) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, m920x_table);
......@@ -500,6 +537,50 @@ static struct dvb_usb_device_properties megasky_properties = {
{ "MSI Mega Sky 580 DVB-T USB2.0",
{ &m920x_table[0], NULL },
{ NULL },
}
}
};
static struct dvb_usb_device_properties digivox_mini_ii_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.firmware = "dvb-usb-digivox-02.fw",
.download_firmware = m9206_firmware_download,
.size_of_priv = sizeof(struct m9206_state),
.identify_state = m920x_identify_state,
.num_adapters = 1,
.adapter = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 8,
.pid_filter = m9206_pid_filter,
.pid_filter_ctrl = m9206_pid_filter_ctrl,
.frontend_attach = digivox_tda10046_frontend_attach,
.tuner_attach = digivox_tda8275_tuner_attach,
.stream = {
.type = USB_BULK,
.count = 8,
.endpoint = 0x81,
.u = {
.bulk = {
.buffersize = 0x4000,
}
}
},
}},
.i2c_algo = &m9206_i2c_algo,
.num_device_descs = 1,
.devices = {
{ "MSI DIGI VOX mini II DVB-T USB2.0",
{ &m920x_table[1], NULL },
{ NULL },
},
}
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment