Commit d4e93e8d authored by Matti Vaittinen's avatar Matti Vaittinen Committed by Mark Brown

regulator: bd71815: bd71828: bd9576: Use dev_err_probe()

The dev_err_probe() has (at least) following benefits over dev_err()
when printing an error print for a failed function call at a device
driver probe:
        - Omit error level print if error is 'EPRBE_DEFER'
        - Standardized print format for returned error
        - return the error value allowing shortening calls like:

        if (ret) {
                dev_err(...);
                return ret;
        }

        to

        if (ret)
                return dev_err_probe(...);

Convert the ROHM BD71828, ROHM BD71815 and ROHM BD9576 regulator drivers
to use the dev_err_probe() when returned error is not hard-coded constant.
Signed-off-by: default avatarMatti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/0b644da4a8f58558ffe474d2593f85c46de2f965.1669203610.git.mazziesaccount@gmail.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 44501eba
......@@ -602,12 +602,10 @@ static int bd7181x_probe(struct platform_device *pdev)
config.ena_gpiod = NULL;
rdev = devm_regulator_register(&pdev->dev, desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev,
"failed to register %s regulator\n",
desc->name);
return PTR_ERR(rdev);
}
if (IS_ERR(rdev))
return dev_err_probe(&pdev->dev, PTR_ERR(rdev),
"failed to register %s regulator\n",
desc->name);
}
return 0;
}
......
......@@ -750,23 +750,20 @@ static int bd71828_probe(struct platform_device *pdev)
rd = &bd71828_rdata[i];
rdev = devm_regulator_register(&pdev->dev,
&rd->desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev,
"failed to register %s regulator\n",
rd->desc.name);
return PTR_ERR(rdev);
}
if (IS_ERR(rdev))
return dev_err_probe(&pdev->dev, PTR_ERR(rdev),
"failed to register %s regulator\n",
rd->desc.name);
for (j = 0; j < rd->reg_init_amnt; j++) {
ret = regmap_update_bits(config.regmap,
rd->reg_inits[j].reg,
rd->reg_inits[j].mask,
rd->reg_inits[j].val);
if (ret) {
dev_err(&pdev->dev,
"regulator %s init failed\n",
rd->desc.name);
return ret;
}
if (ret)
return dev_err_probe(&pdev->dev, ret,
"regulator %s init failed\n",
rd->desc.name);
}
}
return 0;
......
......@@ -953,30 +953,28 @@ static int bd957x_probe(struct platform_device *pdev)
dev_fwnode(pdev->dev.parent),
"rohm,vout1-en", GPIOD_OUT_LOW,
"vout1-en");
if (!IS_ERR(en)) {
/* VOUT1_OPS gpio ctrl */
/*
* Regulator core prioritizes the ena_gpio over
* enable/disable/is_enabled callbacks so no need to
* clear them. We can still use same ops
*/
/* VOUT1_OPS gpio ctrl */
/*
* Regulator core prioritizes the ena_gpio over
* enable/disable/is_enabled callbacks so no need to clear them
* even if GPIO is used. So, we can still use same ops.
*
* In theory it is possible someone wants to set vout1-en LOW
* during OTP loading and set VOUT1 to be controlled by GPIO -
* but control the GPIO from some where else than this driver.
* For that to work we should unset the is_enabled callback
* here.
*
* I believe such case where rohm,vout1-en-low is set and
* vout1-en-gpios is not is likely to be a misconfiguration.
* So let's just err out for now.
*/
if (!IS_ERR(en))
config.ena_gpiod = en;
} else {
/*
* In theory it is possible someone wants to set
* vout1-en LOW during OTP loading and set VOUT1 to be
* controlled by GPIO - but control the GPIO from some
* where else than this driver. For that to work we
* should unset the is_enabled callback here.
*
* I believe such case where rohm,vout1-en-low is set
* and vout1-en-gpios is not is likely to be a
* misconfiguration. So let's just err out for now.
*/
dev_err(&pdev->dev,
"Failed to get VOUT1 control GPIO\n");
return PTR_ERR(en);
}
else
return dev_err_probe(&pdev->dev, PTR_ERR(en),
"Failed to get VOUT1 control GPIO\n");
}
/*
......@@ -1037,12 +1035,10 @@ static int bd957x_probe(struct platform_device *pdev)
r->rdev = devm_regulator_register(&pdev->dev, desc,
&config);
if (IS_ERR(r->rdev)) {
dev_err(&pdev->dev,
"failed to register %s regulator\n",
desc->name);
return PTR_ERR(r->rdev);
}
if (IS_ERR(r->rdev))
return dev_err_probe(&pdev->dev, PTR_ERR(r->rdev),
"failed to register %s regulator\n",
desc->name);
/*
* Clear the VOUT1 GPIO setting - rest of the regulators do not
* support GPIO control
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment