Commit d4f3cd49 authored by Jiri Pirko's avatar Jiri Pirko Committed by David S. Miller

net: use ethtool_cmd_speed_set helper to set ethtool speed value

Signed-off-by: default avatarJiri Pirko <jiri@resnulli.us>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 537fae01
......@@ -141,6 +141,7 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
struct e1000_sfp_flags *eth_flags = &dev_spec->eth_flags;
u32 status;
u32 speed;
status = rd32(E1000_STATUS);
if (hw->phy.media_type == e1000_media_type_copper) {
......@@ -215,13 +216,13 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
if (status & E1000_STATUS_LU) {
if ((status & E1000_STATUS_2P5_SKU) &&
!(status & E1000_STATUS_2P5_SKU_OVER)) {
ecmd->speed = SPEED_2500;
speed = SPEED_2500;
} else if (status & E1000_STATUS_SPEED_1000) {
ecmd->speed = SPEED_1000;
speed = SPEED_1000;
} else if (status & E1000_STATUS_SPEED_100) {
ecmd->speed = SPEED_100;
speed = SPEED_100;
} else {
ecmd->speed = SPEED_10;
speed = SPEED_10;
}
if ((status & E1000_STATUS_FD) ||
hw->phy.media_type != e1000_media_type_copper)
......@@ -229,9 +230,10 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
else
ecmd->duplex = DUPLEX_HALF;
} else {
ecmd->speed = SPEED_UNKNOWN;
speed = SPEED_UNKNOWN;
ecmd->duplex = DUPLEX_UNKNOWN;
}
ethtool_cmd_speed_set(ecmd, speed);
if ((hw->phy.media_type == e1000_media_type_fiber) ||
hw->mac.autoneg)
ecmd->autoneg = AUTONEG_ENABLE;
......
......@@ -298,7 +298,6 @@ static int ntb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
cmd->supported = SUPPORTED_Backplane;
cmd->advertising = ADVERTISED_Backplane;
cmd->speed = SPEED_UNKNOWN;
ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
cmd->duplex = DUPLEX_FULL;
cmd->port = PORT_OTHER;
......
......@@ -5726,6 +5726,7 @@ int qeth_core_ethtool_get_settings(struct net_device *netdev,
struct qeth_card *card = netdev->ml_priv;
enum qeth_link_types link_type;
struct carrier_info carrier_info;
u32 speed;
if ((card->info.type == QETH_CARD_TYPE_IQD) || (card->info.guestlan))
link_type = QETH_LINK_TYPE_10GBIT_ETH;
......@@ -5740,28 +5741,29 @@ int qeth_core_ethtool_get_settings(struct net_device *netdev,
case QETH_LINK_TYPE_FAST_ETH:
case QETH_LINK_TYPE_LANE_ETH100:
qeth_set_ecmd_adv_sup(ecmd, SPEED_100, PORT_TP);
ecmd->speed = SPEED_100;
speed = SPEED_100;
ecmd->port = PORT_TP;
break;
case QETH_LINK_TYPE_GBIT_ETH:
case QETH_LINK_TYPE_LANE_ETH1000:
qeth_set_ecmd_adv_sup(ecmd, SPEED_1000, PORT_FIBRE);
ecmd->speed = SPEED_1000;
speed = SPEED_1000;
ecmd->port = PORT_FIBRE;
break;
case QETH_LINK_TYPE_10GBIT_ETH:
qeth_set_ecmd_adv_sup(ecmd, SPEED_10000, PORT_FIBRE);
ecmd->speed = SPEED_10000;
speed = SPEED_10000;
ecmd->port = PORT_FIBRE;
break;
default:
qeth_set_ecmd_adv_sup(ecmd, SPEED_10, PORT_TP);
ecmd->speed = SPEED_10;
speed = SPEED_10;
ecmd->port = PORT_TP;
}
ethtool_cmd_speed_set(ecmd, speed);
/* Check if we can obtain more accurate information. */
/* If QUERY_CARD_INFO command is not supported or fails, */
......@@ -5806,18 +5808,19 @@ int qeth_core_ethtool_get_settings(struct net_device *netdev,
switch (carrier_info.port_speed) {
case CARD_INFO_PORTS_10M:
ecmd->speed = SPEED_10;
speed = SPEED_10;
break;
case CARD_INFO_PORTS_100M:
ecmd->speed = SPEED_100;
speed = SPEED_100;
break;
case CARD_INFO_PORTS_1G:
ecmd->speed = SPEED_1000;
speed = SPEED_1000;
break;
case CARD_INFO_PORTS_10G:
ecmd->speed = SPEED_10000;
speed = SPEED_10000;
break;
}
ethtool_cmd_speed_set(ecmd, speed);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment