Commit d50141d8 authored by Russell King's avatar Russell King Committed by Philipp Zabel

imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set()

We do not need to track the state of the IPU DI's clock flags by having
each display bridge calling back into imx-drm-core, and then back out
into ipuv3-crtc.c.

ipuv3-crtc can instead just scan the list of encoders to retrieve their
type, and build up a picture of which types of encoders are attached.
We can then use this information to configure the IPU DI clocking mode
without any uncertainty - if we have multiple bridges connected to the
same DI, if one of them requires a synchronous DI clock, that's what we
must use.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
parent 503f1631
......@@ -116,8 +116,7 @@ int imx_drm_panel_format_pins(struct drm_encoder *encoder,
helper = &imx_crtc->imx_drm_helper_funcs;
if (helper->set_interface_pix_fmt)
return helper->set_interface_pix_fmt(encoder->crtc,
encoder->encoder_type, interface_pix_fmt,
hsync_pin, vsync_pin);
interface_pix_fmt, hsync_pin, vsync_pin);
return 0;
}
EXPORT_SYMBOL_GPL(imx_drm_panel_format_pins);
......
......@@ -17,7 +17,7 @@ int imx_drm_crtc_id(struct imx_drm_crtc *crtc);
struct imx_drm_crtc_helper_funcs {
int (*enable_vblank)(struct drm_crtc *crtc);
void (*disable_vblank)(struct drm_crtc *crtc);
int (*set_interface_pix_fmt)(struct drm_crtc *crtc, u32 encoder_type,
int (*set_interface_pix_fmt)(struct drm_crtc *crtc,
u32 pix_fmt, int hsync_pin, int vsync_pin);
const struct drm_crtc_helper_funcs *crtc_helper_funcs;
const struct drm_crtc_funcs *crtc_funcs;
......
......@@ -46,7 +46,6 @@ struct ipu_crtc {
struct drm_framebuffer *newfb;
int irq;
u32 interface_pix_fmt;
unsigned long di_clkflags;
int di_hsync_pin;
int di_vsync_pin;
};
......@@ -141,22 +140,42 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc,
int x, int y,
struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct drm_encoder *encoder;
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
int ret;
struct ipu_di_signal_cfg sig_cfg = {};
unsigned long encoder_types = 0;
u32 out_pixel_fmt;
int ret;
dev_dbg(ipu_crtc->dev, "%s: mode->hdisplay: %d\n", __func__,
mode->hdisplay);
dev_dbg(ipu_crtc->dev, "%s: mode->vdisplay: %d\n", __func__,
mode->vdisplay);
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
if (encoder->crtc == crtc)
encoder_types |= BIT(encoder->encoder_type);
dev_dbg(ipu_crtc->dev, "%s: attached to encoder types 0x%lx\n",
__func__, encoder_types);
/*
* If we have DAC, TVDAC or LDB, then we need the IPU DI clock
* to be the same as the LDB DI clock.
*/
if (encoder_types & (BIT(DRM_MODE_ENCODER_DAC) |
BIT(DRM_MODE_ENCODER_TVDAC) |
BIT(DRM_MODE_ENCODER_LVDS)))
sig_cfg.clkflags = IPU_DI_CLKMODE_SYNC | IPU_DI_CLKMODE_EXT;
else
sig_cfg.clkflags = 0;
out_pixel_fmt = ipu_crtc->interface_pix_fmt;
sig_cfg.enable_pol = 1;
sig_cfg.clk_pol = 0;
sig_cfg.pixel_fmt = out_pixel_fmt;
sig_cfg.clkflags = ipu_crtc->di_clkflags;
sig_cfg.v_to_h_sync = 0;
sig_cfg.hsync_pin = ipu_crtc->di_hsync_pin;
sig_cfg.vsync_pin = ipu_crtc->di_vsync_pin;
......@@ -271,7 +290,7 @@ static void ipu_disable_vblank(struct drm_crtc *crtc)
ipu_crtc->newfb = NULL;
}
static int ipu_set_interface_pix_fmt(struct drm_crtc *crtc, u32 encoder_type,
static int ipu_set_interface_pix_fmt(struct drm_crtc *crtc,
u32 pixfmt, int hsync_pin, int vsync_pin)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
......@@ -280,19 +299,6 @@ static int ipu_set_interface_pix_fmt(struct drm_crtc *crtc, u32 encoder_type,
ipu_crtc->di_hsync_pin = hsync_pin;
ipu_crtc->di_vsync_pin = vsync_pin;
switch (encoder_type) {
case DRM_MODE_ENCODER_DAC:
case DRM_MODE_ENCODER_TVDAC:
case DRM_MODE_ENCODER_LVDS:
ipu_crtc->di_clkflags = IPU_DI_CLKMODE_SYNC |
IPU_DI_CLKMODE_EXT;
break;
case DRM_MODE_ENCODER_TMDS:
case DRM_MODE_ENCODER_NONE:
ipu_crtc->di_clkflags = 0;
break;
}
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment