Commit d50d7ac0 authored by Jingoo Han's avatar Jingoo Han Committed by Linus Torvalds

backlight: s6e63m0: convert s6e63m0 to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: default avatarJingoo Han <jg1.han@samsung.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 26cd2a44
......@@ -817,12 +817,12 @@ static int s6e63m0_remove(struct spi_device *spi)
return 0;
}
#if defined(CONFIG_PM)
static int s6e63m0_suspend(struct spi_device *spi, pm_message_t mesg)
#ifdef CONFIG_PM_SLEEP
static int s6e63m0_suspend(struct device *dev)
{
struct s6e63m0 *lcd = spi_get_drvdata(spi);
struct s6e63m0 *lcd = dev_get_drvdata(dev);
dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power);
dev_dbg(dev, "lcd->power = %d\n", lcd->power);
/*
* when lcd panel is suspend, lcd panel becomes off
......@@ -831,19 +831,18 @@ static int s6e63m0_suspend(struct spi_device *spi, pm_message_t mesg)
return s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
}
static int s6e63m0_resume(struct spi_device *spi)
static int s6e63m0_resume(struct device *dev)
{
struct s6e63m0 *lcd = spi_get_drvdata(spi);
struct s6e63m0 *lcd = dev_get_drvdata(dev);
lcd->power = FB_BLANK_POWERDOWN;
return s6e63m0_power(lcd, FB_BLANK_UNBLANK);
}
#else
#define s6e63m0_suspend NULL
#define s6e63m0_resume NULL
#endif
static SIMPLE_DEV_PM_OPS(s6e63m0_pm_ops, s6e63m0_suspend, s6e63m0_resume);
/* Power down all displays on reboot, poweroff or halt. */
static void s6e63m0_shutdown(struct spi_device *spi)
{
......@@ -856,12 +855,11 @@ static struct spi_driver s6e63m0_driver = {
.driver = {
.name = "s6e63m0",
.owner = THIS_MODULE,
.pm = &s6e63m0_pm_ops,
},
.probe = s6e63m0_probe,
.remove = s6e63m0_remove,
.shutdown = s6e63m0_shutdown,
.suspend = s6e63m0_suspend,
.resume = s6e63m0_resume,
};
module_spi_driver(s6e63m0_driver);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment