Commit d5158e02 authored by Niels Skou Olsen's avatar Niels Skou Olsen Committed by Jiri Kosina

HID: Ignore Jabra HID interface based on firmware version

Two Jabra speakerphone devices were added to the ignore list in 2013,
because the device HID interfaces didn't work well with kernel usbhid
driver, and could cause volume key event storm.

See the original commit:
Commit 31b9779c ("HID: ignore Jabra speakerphones HID interface")

Modify hid_lookup_quirk() to consider the firmware version of these two
devices, so that only versions older than a known good version are
ignored.
Signed-off-by: default avatarNiels Skou Olsen <nolsen@jabra.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent e04a0442
...@@ -788,8 +788,6 @@ static const struct hid_device_id hid_ignore_list[] = { ...@@ -788,8 +788,6 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006) }, { HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1007) }, { HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1007) },
{ HID_USB_DEVICE(USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA) }, { HID_USB_DEVICE(USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA) },
{ HID_USB_DEVICE(USB_VENDOR_ID_JABRA, USB_DEVICE_ID_JABRA_SPEAK_410) },
{ HID_USB_DEVICE(USB_VENDOR_ID_JABRA, USB_DEVICE_ID_JABRA_SPEAK_510) },
{ HID_USB_DEVICE(USB_VENDOR_ID_JABRA, USB_DEVICE_ID_JABRA_GN9350E) }, { HID_USB_DEVICE(USB_VENDOR_ID_JABRA, USB_DEVICE_ID_JABRA_GN9350E) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO) }, { HID_USB_DEVICE(USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) }, { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) },
...@@ -1235,6 +1233,20 @@ unsigned long hid_lookup_quirk(const struct hid_device *hdev) ...@@ -1235,6 +1233,20 @@ unsigned long hid_lookup_quirk(const struct hid_device *hdev)
hdev->product <= USB_DEVICE_ID_NCR_LAST) hdev->product <= USB_DEVICE_ID_NCR_LAST)
return HID_QUIRK_NO_INIT_REPORTS; return HID_QUIRK_NO_INIT_REPORTS;
/* These devices must be ignored if version (bcdDevice) is too old */
if (hdev->bus == BUS_USB && hdev->vendor == USB_VENDOR_ID_JABRA) {
switch (hdev->product) {
case USB_DEVICE_ID_JABRA_SPEAK_410:
if (hdev->version < 0x0111)
return HID_QUIRK_IGNORE;
break;
case USB_DEVICE_ID_JABRA_SPEAK_510:
if (hdev->version < 0x0214)
return HID_QUIRK_IGNORE;
break;
}
}
mutex_lock(&dquirks_lock); mutex_lock(&dquirks_lock);
quirk_entry = hid_exists_dquirk(hdev); quirk_entry = hid_exists_dquirk(hdev);
if (quirk_entry) if (quirk_entry)
......
...@@ -1327,6 +1327,7 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id * ...@@ -1327,6 +1327,7 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *
hid->bus = BUS_USB; hid->bus = BUS_USB;
hid->vendor = le16_to_cpu(dev->descriptor.idVendor); hid->vendor = le16_to_cpu(dev->descriptor.idVendor);
hid->product = le16_to_cpu(dev->descriptor.idProduct); hid->product = le16_to_cpu(dev->descriptor.idProduct);
hid->version = le16_to_cpu(dev->descriptor.bcdDevice);
hid->name[0] = 0; hid->name[0] = 0;
if (intf->cur_altsetting->desc.bInterfaceProtocol == if (intf->cur_altsetting->desc.bInterfaceProtocol ==
USB_INTERFACE_PROTOCOL_MOUSE) USB_INTERFACE_PROTOCOL_MOUSE)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment