powerpc/mm: Switch obsolete dssall to .long

The dssall ("Data Stream Stop All") instruction is obsolete altogether
with other Data Cache Instructions since ISA 2.03 (year 2006).

LLVM IAS does not support it but PPC970 seems to be using it.
This switches dssall to .long as there is no much point in fixing LLVM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-6-aik@ozlabs.ru

arch/powerpc/include/asm/ppc-opcode.h

@@ -249,6 +249,7 @@
 #define PPC_INST_COPY			0x7c20060c
 #define PPC_INST_DCBA			0x7c0005ec
 #define PPC_INST_DCBA_MASK		0xfc0007fe
+#define PPC_INST_DSSALL			0x7e00066c
 #define PPC_INST_ISEL			0x7c00001e
 #define PPC_INST_ISEL_MASK		0xfc00003e
 #define PPC_INST_LSWI			0x7c0004aa
@@ -577,6 +578,7 @@
 #define	PPC_DCBZL(a, b)		stringify_in_c(.long PPC_RAW_DCBZL(a, b))
 #define	PPC_DIVDE(t, a, b)	stringify_in_c(.long PPC_RAW_DIVDE(t, a, b))
 #define	PPC_DIVDEU(t, a, b)	stringify_in_c(.long PPC_RAW_DIVDEU(t, a, b))
+#define PPC_DSSALL		stringify_in_c(.long PPC_INST_DSSALL)
 #define PPC_LQARX(t, a, b, eh)	stringify_in_c(.long PPC_RAW_LQARX(t, a, b, eh))
 #define PPC_STQCX(t, a, b)	stringify_in_c(.long PPC_RAW_STQCX(t, a, b))
 #define PPC_MADDHD(t, a, b, c)	stringify_in_c(.long PPC_RAW_MADDHD(t, a, b, c))

arch/powerpc/kernel/idle.c

@@ -82,7 +82,7 @@ void power4_idle(void)
 		return;
 
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		asm volatile("DSSALL ; sync" ::: "memory");
+		asm volatile(PPC_DSSALL " ; sync" ::: "memory");
 
 	power4_idle_nap();
 

arch/powerpc/kernel/idle_6xx.S

@@ -129,7 +129,7 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
 	mtspr	SPRN_HID0,r4
 BEGIN_FTR_SECTION
-	DSSALL
+	PPC_DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	lwz	r8,TI_LOCAL_FLAGS(r2)	/* set napping bit */

arch/powerpc/kernel/l2cr_6xx.S

@@ -96,7 +96,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_L2CR)
 
 	/* Stop DST streams */
 BEGIN_FTR_SECTION
-	DSSALL
+	PPC_DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 
@@ -292,7 +292,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_L3CR)
 	isync
 
 	/* Stop DST streams */
-	DSSALL
+	PPC_DSSALL
 	sync
 
 	/* Get the current enable bit of the L3CR into r4 */
@@ -401,7 +401,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
 _GLOBAL(__flush_disable_L1)
 	/* Stop pending alitvec streams and memory accesses */
 BEGIN_FTR_SECTION
-	DSSALL
+	PPC_DSSALL
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
  	sync
 

arch/powerpc/kernel/swsusp_32.S

@@ -181,7 +181,7 @@ _GLOBAL(swsusp_arch_resume)
 #ifdef CONFIG_ALTIVEC
 	/* Stop pending alitvec streams and memory accesses */
 BEGIN_FTR_SECTION
-	DSSALL
+	PPC_DSSALL
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif
  	sync

arch/powerpc/kernel/swsusp_asm64.S

@@ -141,7 +141,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_LPAR)
 _GLOBAL(swsusp_arch_resume)
 	/* Stop pending alitvec streams and memory accesses */
 BEGIN_FTR_SECTION
-	DSSALL
+	PPC_DSSALL
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	sync
 

arch/powerpc/mm/mmu_context.c

@@ -90,7 +90,7 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 	 * context
 	 */
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		asm volatile ("dssall");
+		asm volatile (PPC_DSSALL);
 
 	if (!new_on_cpu)
 		membarrier_arch_switch_mm(prev, next, tsk);

arch/powerpc/platforms/powermac/cache.S

@@ -48,7 +48,7 @@ flush_disable_75x:
 
 	/* Stop DST streams */
 BEGIN_FTR_SECTION
-	DSSALL
+	PPC_DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 
@@ -197,7 +197,7 @@ flush_disable_745x:
 	isync
 
 	/* Stop prefetch streams */
-	DSSALL
+	PPC_DSSALL
 	sync
 
 	/* Disable L2 prefetching */