Commit d533f049 authored by Jingchang Lu's avatar Jingchang Lu Committed by Wolfram Sang

i2c: imx: use struct representing i2c clk{div, val} pair

using struct representing the i2c clk{div, val} pair would
make the i2c_clk_div array more clear.
Signed-off-by: default avatarJingchang Lu <b35083@freescale.com>
Reviewed-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent a94dd00f
......@@ -30,6 +30,8 @@
* Copyright (C) 2007 RightHand Technologies, Inc.
* Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
*
* Copyright 2013 Freescale Semiconductor, Inc.
*
*/
/** Includes *******************************************************************
......@@ -95,8 +97,12 @@
*
* Duplicated divider values removed from list
*/
struct imx_i2c_clk_pair {
u16 div;
u16 val;
};
static u16 __initdata i2c_clk_div[50][2] = {
static struct imx_i2c_clk_pair __initdata i2c_clk_div[] = {
{ 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 },
{ 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 },
{ 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 },
......@@ -274,15 +280,15 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
/* Divider value calculation */
i2c_clk_rate = clk_get_rate(i2c_imx->clk);
div = (i2c_clk_rate + rate - 1) / rate;
if (div < i2c_clk_div[0][0])
if (div < i2c_clk_div[0].div)
i = 0;
else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0])
else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1].div)
i = ARRAY_SIZE(i2c_clk_div) - 1;
else
for (i = 0; i2c_clk_div[i][0] < div; i++);
for (i = 0; i2c_clk_div[i].div < div; i++);
/* Store divider value */
i2c_imx->ifdr = i2c_clk_div[i][1];
i2c_imx->ifdr = i2c_clk_div[i].val;
/*
* There dummy delay is calculated.
......@@ -290,7 +296,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
* This delay is used in I2C bus disable function
* to fix chip hardware bug.
*/
i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0]
i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div
+ (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
/* dev_dbg() can't be used, because adapter is not yet registered */
......@@ -298,7 +304,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n",
__func__, i2c_clk_rate, div);
dev_dbg(&i2c_imx->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n",
__func__, i2c_clk_div[i][1], i2c_clk_div[i][0]);
__func__, i2c_clk_div[i].val, i2c_clk_div[i].div);
#endif
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment