ARM: dts: qcom: msm8974: rename labels for DSI nodes

Currently in board files MDSS and HDMI nodes stay apart, because labels
for HDMI nodes do not have the mdss_ prefix. It was found that grouping
all display-related notes is more useful.

To keep all display-related nodes close in the board files, change DSI
node aliases from dsi_* to mdss_dsi_*.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531011623.3808538-15-dmitry.baryshkov@linaro.org

arch/arm/boot/dts/qcom-apq8074-dragonboard.dts

@@ -71,7 +71,15 @@ eeprom: eeprom@52 {
 	};
 };
 
-&dsi0 {
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
 	vdda-supply = <&pm8941_l2>;
 	vdd-supply = <&pm8941_l22>;
 	vddio-supply = <&pm8941_l12>;
@@ -88,18 +96,18 @@ panel: panel@0 {
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
+				remote-endpoint = <&mdss_dsi0_out>;
 			};
 		};
 	};
 };
 
-&dsi0_out {
+&mdss_dsi0_out {
 	remote-endpoint = <&panel_in>;
 	data-lanes = <0 1 2 3>;
 };
 
-&dsi0_phy {
+&mdss_dsi0_phy {
 	status = "okay";
 
 	vddio-supply = <&pm8941_l12>;

arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts

@@ -230,7 +230,11 @@ bluetooth {
 	};
 };
 
-&dsi0 {
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
 	status = "okay";
 
 	vdda-supply = <&pm8941_l2>;
@@ -246,27 +250,23 @@ panel: panel@0 {
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
+				remote-endpoint = <&mdss_dsi0_out>;
 			};
 		};
 	};
 };
 
-&dsi0_out {
+&mdss_dsi0_out {
 	remote-endpoint = <&panel_in>;
 	data-lanes = <0 1 2 3>;
 };
 
-&dsi0_phy {
+&mdss_dsi0_phy {
 	status = "okay";
 
 	vddio-supply = <&pm8941_l12>;
 };
 
-&mdss {
-	status = "okay";
-};
-
 &pm8941_gpios {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio3";

arch/arm/boot/dts/qcom-msm8974.dtsi

@@ -1836,10 +1836,10 @@ mmcc: clock-controller@fd8c0000 {
 				 <&gcc GPLL0_VOTE>,
 				 <&gcc GPLL1_VOTE>,
 				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <&dsi0_phy 1>,
-				 <&dsi0_phy 0>,
-				 <&dsi1_phy 1>,
-				 <&dsi1_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>,
 				 <0>,
 				 <0>,
 				 <0>;
@@ -1904,20 +1904,20 @@ ports {
 					port@0 {
 						reg = <0>;
 						mdp5_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
 						mdp5_intf2_out: endpoint {
-							remote-endpoint = <&dsi1_in>;
+							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
 				};
 			};
 
-			dsi0: dsi@fd922800 {
+			mdss_dsi0: dsi@fd922800 {
 				compatible = "qcom,msm8974-dsi-ctrl",
 					     "qcom,mdss-dsi-ctrl";
 				reg = <0xfd922800 0x1f8>;
@@ -1927,7 +1927,7 @@ dsi0: dsi@fd922800 {
 				interrupts = <4>;
 
 				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_AHB_CLK>,
@@ -1944,7 +1944,7 @@ dsi0: dsi@fd922800 {
 					      "core",
 					      "core_mmss";
 
-				phys = <&dsi0_phy>;
+				phys = <&mdss_dsi0_phy>;
 
 				status = "disabled";
 
@@ -1957,20 +1957,20 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi0_in: endpoint {
+						mdss_dsi0_in: endpoint {
 							remote-endpoint = <&mdp5_intf1_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi0_out: endpoint {
+						mdss_dsi0_out: endpoint {
 						};
 					};
 				};
 			};
 
-			dsi0_phy: phy@fd922a00 {
+			mdss_dsi0_phy: phy@fd922a00 {
 				compatible = "qcom,dsi-phy-28nm-hpm";
 				reg = <0xfd922a00 0xd4>,
 				      <0xfd922b00 0x280>,
@@ -1988,7 +1988,7 @@ dsi0_phy: phy@fd922a00 {
 				status = "disabled";
 			};
 
-			dsi1: dsi@fd922e00 {
+			mdss_dsi1: dsi@fd922e00 {
 				compatible = "qcom,msm8974-dsi-ctrl",
 					     "qcom,mdss-dsi-ctrl";
 				reg = <0xfd922e00 0x1f8>;
@@ -1998,7 +1998,7 @@ dsi1: dsi@fd922e00 {
 				interrupts = <4>;
 
 				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_AHB_CLK>,
@@ -2015,7 +2015,7 @@ dsi1: dsi@fd922e00 {
 					      "core",
 					      "core_mmss";
 
-				phys = <&dsi1_phy>;
+				phys = <&mdss_dsi1_phy>;
 
 				status = "disabled";
 
@@ -2028,20 +2028,20 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi1_in: endpoint {
+						mdss_dsi1_in: endpoint {
 							remote-endpoint = <&mdp5_intf2_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi1_out: endpoint {
+						mdss_dsi1_out: endpoint {
 						};
 					};
 				};
 			};
 
-			dsi1_phy: phy@fd923000 {
+			mdss_dsi1_phy: phy@fd923000 {
 				compatible = "qcom,dsi-phy-28nm-hpm";
 				reg = <0xfd923000 0xd4>,
 				      <0xfd923100 0x280>,

arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts

@@ -329,7 +329,15 @@ bluetooth {
 	};
 };
 
-&dsi0 {
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
 	status = "okay";
 
 	vdda-supply = <&pma8084_l2>;
@@ -351,31 +359,23 @@ panel: panel@0 {
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
+				remote-endpoint = <&mdss_dsi0_out>;
 			};
 		};
 	};
 };
 
-&dsi0_out {
+&mdss_dsi0_out {
 	remote-endpoint = <&panel_in>;
 	data-lanes = <0 1 2 3>;
 };
 
-&dsi0_phy {
+&mdss_dsi0_phy {
 	status = "okay";
 
 	vddio-supply = <&pma8084_l12>;
 };
 
-&gpu {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
 &pma8084_gpios {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio3", "gpio5";