Commit d5a14ff0 authored by David S. Miller's avatar David S. Miller

Merge branch 'mlxsw-next'

Jiri Pirko says:

====================
mlxsw: small driver update

For details, see individual patches.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 1d005788 71fac305
......@@ -31,7 +31,7 @@ config MLXSW_PCI
config MLXSW_SWITCHX2
tristate "Mellanox Technologies SwitchX-2 support"
depends on MLXSW_CORE && NET_SWITCHDEV
depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV
default m
---help---
This driver supports Mellanox Technologies SwitchX-2 Ethernet
......@@ -42,7 +42,7 @@ config MLXSW_SWITCHX2
config MLXSW_SPECTRUM
tristate "Mellanox Technologies Spectrum support"
depends on MLXSW_CORE && NET_SWITCHDEV && VLAN_8021Q
depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV && VLAN_8021Q
default m
---help---
This driver supports Mellanox Technologies Spectrum Ethernet
......
......@@ -823,17 +823,6 @@ static struct mlxsw_driver *mlxsw_core_driver_get(const char *kind)
spin_lock(&mlxsw_core_driver_list_lock);
mlxsw_driver = __driver_find(kind);
if (!mlxsw_driver) {
spin_unlock(&mlxsw_core_driver_list_lock);
request_module(MLXSW_MODULE_ALIAS_PREFIX "%s", kind);
spin_lock(&mlxsw_core_driver_list_lock);
mlxsw_driver = __driver_find(kind);
}
if (mlxsw_driver) {
if (!try_module_get(mlxsw_driver->owner))
mlxsw_driver = NULL;
}
spin_unlock(&mlxsw_core_driver_list_lock);
return mlxsw_driver;
}
......@@ -845,9 +834,6 @@ static void mlxsw_core_driver_put(const char *kind)
spin_lock(&mlxsw_core_driver_list_lock);
mlxsw_driver = __driver_find(kind);
spin_unlock(&mlxsw_core_driver_list_lock);
if (!mlxsw_driver)
return;
module_put(mlxsw_driver->owner);
}
static int mlxsw_core_debugfs_init(struct mlxsw_core *mlxsw_core)
......
......@@ -51,13 +51,6 @@
#include "cmd.h"
#include "resources.h"
#define MLXSW_MODULE_ALIAS_PREFIX "mlxsw-driver-"
#define MODULE_MLXSW_DRIVER_ALIAS(kind) \
MODULE_ALIAS(MLXSW_MODULE_ALIAS_PREFIX kind)
#define MLXSW_DEVICE_KIND_SWITCHX2 "switchx2"
#define MLXSW_DEVICE_KIND_SPECTRUM "spectrum"
struct mlxsw_core;
struct mlxsw_driver;
struct mlxsw_bus;
......@@ -221,7 +214,6 @@ struct mlxsw_config_profile {
struct mlxsw_driver {
struct list_head list;
const char *kind;
struct module *owner;
size_t priv_size;
int (*init)(struct mlxsw_core *mlxsw_core,
const struct mlxsw_bus_info *mlxsw_bus_info);
......
......@@ -48,6 +48,7 @@
#include <linux/seq_file.h>
#include <linux/string.h>
#include "pci_hw.h"
#include "pci.h"
#include "core.h"
#include "cmd.h"
......@@ -56,26 +57,8 @@
static const char mlxsw_pci_driver_name[] = "mlxsw_pci";
static const struct pci_device_id mlxsw_pci_id_table[] = {
{PCI_VDEVICE(MELLANOX, PCI_DEVICE_ID_MELLANOX_SWITCHX2), 0},
{PCI_VDEVICE(MELLANOX, PCI_DEVICE_ID_MELLANOX_SPECTRUM), 0},
{0, }
};
static struct dentry *mlxsw_pci_dbg_root;
static const char *mlxsw_pci_device_kind_get(const struct pci_device_id *id)
{
switch (id->device) {
case PCI_DEVICE_ID_MELLANOX_SWITCHX2:
return MLXSW_DEVICE_KIND_SWITCHX2;
case PCI_DEVICE_ID_MELLANOX_SPECTRUM:
return MLXSW_DEVICE_KIND_SPECTRUM;
default:
BUG();
}
}
#define mlxsw_pci_write32(mlxsw_pci, reg, val) \
iowrite32be(val, (mlxsw_pci)->hw_addr + (MLXSW_PCI_ ## reg))
#define mlxsw_pci_read32(mlxsw_pci, reg) \
......@@ -1553,7 +1536,7 @@ static int mlxsw_pci_init(void *bus_priv, struct mlxsw_core *mlxsw_core,
err = request_irq(mlxsw_pci->msix_entry.vector,
mlxsw_pci_eq_irq_handler, 0,
mlxsw_pci_driver_name, mlxsw_pci);
mlxsw_pci->bus_info.device_kind, mlxsw_pci);
if (err) {
dev_err(&pdev->dev, "IRQ request failed\n");
goto err_request_eq_irq;
......@@ -1793,6 +1776,7 @@ static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci)
static int mlxsw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
const char *driver_name = pdev->driver->name;
struct mlxsw_pci *mlxsw_pci;
int err;
......@@ -1806,7 +1790,7 @@ static int mlxsw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err_pci_enable_device;
}
err = pci_request_regions(pdev, mlxsw_pci_driver_name);
err = pci_request_regions(pdev, driver_name);
if (err) {
dev_err(&pdev->dev, "pci_request_regions failed\n");
goto err_pci_request_regions;
......@@ -1857,7 +1841,7 @@ static int mlxsw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err_msix_init;
}
mlxsw_pci->bus_info.device_kind = mlxsw_pci_device_kind_get(id);
mlxsw_pci->bus_info.device_kind = driver_name;
mlxsw_pci->bus_info.device_name = pci_name(mlxsw_pci->pdev);
mlxsw_pci->bus_info.dev = &pdev->dev;
......@@ -1909,33 +1893,30 @@ static void mlxsw_pci_remove(struct pci_dev *pdev)
kfree(mlxsw_pci);
}
static struct pci_driver mlxsw_pci_driver = {
.name = mlxsw_pci_driver_name,
.id_table = mlxsw_pci_id_table,
.probe = mlxsw_pci_probe,
.remove = mlxsw_pci_remove,
};
int mlxsw_pci_driver_register(struct pci_driver *pci_driver)
{
pci_driver->probe = mlxsw_pci_probe;
pci_driver->remove = mlxsw_pci_remove;
return pci_register_driver(pci_driver);
}
EXPORT_SYMBOL(mlxsw_pci_driver_register);
static int __init mlxsw_pci_module_init(void)
void mlxsw_pci_driver_unregister(struct pci_driver *pci_driver)
{
int err;
pci_unregister_driver(pci_driver);
}
EXPORT_SYMBOL(mlxsw_pci_driver_unregister);
static int __init mlxsw_pci_module_init(void)
{
mlxsw_pci_dbg_root = debugfs_create_dir(mlxsw_pci_driver_name, NULL);
if (!mlxsw_pci_dbg_root)
return -ENOMEM;
err = pci_register_driver(&mlxsw_pci_driver);
if (err)
goto err_register_driver;
return 0;
err_register_driver:
debugfs_remove_recursive(mlxsw_pci_dbg_root);
return err;
}
static void __exit mlxsw_pci_module_exit(void)
{
pci_unregister_driver(&mlxsw_pci_driver);
debugfs_remove_recursive(mlxsw_pci_dbg_root);
}
......@@ -1945,4 +1926,3 @@ module_exit(mlxsw_pci_module_exit);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Jiri Pirko <jiri@mellanox.com>");
MODULE_DESCRIPTION("Mellanox switch PCI interface driver");
MODULE_DEVICE_TABLE(pci, mlxsw_pci_id_table);
/*
* drivers/net/ethernet/mellanox/mlxsw/pci.h
* Copyright (c) 2015 Mellanox Technologies. All rights reserved.
* Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
* Copyright (c) 2016 Mellanox Technologies. All rights reserved.
* Copyright (c) 2016 Jiri Pirko <jiri@mellanox.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
......@@ -35,197 +35,29 @@
#ifndef _MLXSW_PCI_H
#define _MLXSW_PCI_H
#include <linux/bitops.h>
#include <linux/pci.h>
#include "item.h"
#define PCI_DEVICE_ID_MELLANOX_SWITCHX2 0xc738
#define PCI_DEVICE_ID_MELLANOX_SPECTRUM 0xcb84
#define PCI_DEVICE_ID_MELLANOX_SWITCHX2 0xc738
#define PCI_DEVICE_ID_MELLANOX_SPECTRUM 0xcb84
#define MLXSW_PCI_BAR0_SIZE (1024 * 1024) /* 1MB */
#define MLXSW_PCI_PAGE_SIZE 4096
#if IS_ENABLED(CONFIG_MLXSW_PCI)
#define MLXSW_PCI_CIR_BASE 0x71000
#define MLXSW_PCI_CIR_IN_PARAM_HI MLXSW_PCI_CIR_BASE
#define MLXSW_PCI_CIR_IN_PARAM_LO (MLXSW_PCI_CIR_BASE + 0x04)
#define MLXSW_PCI_CIR_IN_MODIFIER (MLXSW_PCI_CIR_BASE + 0x08)
#define MLXSW_PCI_CIR_OUT_PARAM_HI (MLXSW_PCI_CIR_BASE + 0x0C)
#define MLXSW_PCI_CIR_OUT_PARAM_LO (MLXSW_PCI_CIR_BASE + 0x10)
#define MLXSW_PCI_CIR_TOKEN (MLXSW_PCI_CIR_BASE + 0x14)
#define MLXSW_PCI_CIR_CTRL (MLXSW_PCI_CIR_BASE + 0x18)
#define MLXSW_PCI_CIR_CTRL_GO_BIT BIT(23)
#define MLXSW_PCI_CIR_CTRL_EVREQ_BIT BIT(22)
#define MLXSW_PCI_CIR_CTRL_OPCODE_MOD_SHIFT 12
#define MLXSW_PCI_CIR_CTRL_STATUS_SHIFT 24
#define MLXSW_PCI_CIR_TIMEOUT_MSECS 1000
int mlxsw_pci_driver_register(struct pci_driver *pci_driver);
void mlxsw_pci_driver_unregister(struct pci_driver *pci_driver);
#define MLXSW_PCI_SW_RESET 0xF0010
#define MLXSW_PCI_SW_RESET_RST_BIT BIT(0)
#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 5000
#define MLXSW_PCI_FW_READY 0xA1844
#define MLXSW_PCI_FW_READY_MASK 0xFF
#define MLXSW_PCI_FW_READY_MAGIC 0x5E
#else
#define MLXSW_PCI_DOORBELL_SDQ_OFFSET 0x000
#define MLXSW_PCI_DOORBELL_RDQ_OFFSET 0x200
#define MLXSW_PCI_DOORBELL_CQ_OFFSET 0x400
#define MLXSW_PCI_DOORBELL_EQ_OFFSET 0x600
#define MLXSW_PCI_DOORBELL_ARM_CQ_OFFSET 0x800
#define MLXSW_PCI_DOORBELL_ARM_EQ_OFFSET 0xA00
static inline int
mlxsw_pci_driver_register(struct pci_driver *pci_driver)
{
return 0;
}
#define MLXSW_PCI_DOORBELL(offset, type_offset, num) \
((offset) + (type_offset) + (num) * 4)
static inline void
mlxsw_pci_driver_unregister(struct pci_driver *pci_driver)
{
}
#define MLXSW_PCI_CQS_MAX 96
#define MLXSW_PCI_EQS_COUNT 2
#define MLXSW_PCI_EQ_ASYNC_NUM 0
#define MLXSW_PCI_EQ_COMP_NUM 1
#define MLXSW_PCI_AQ_PAGES 8
#define MLXSW_PCI_AQ_SIZE (MLXSW_PCI_PAGE_SIZE * MLXSW_PCI_AQ_PAGES)
#define MLXSW_PCI_WQE_SIZE 32 /* 32 bytes per element */
#define MLXSW_PCI_CQE_SIZE 16 /* 16 bytes per element */
#define MLXSW_PCI_EQE_SIZE 16 /* 16 bytes per element */
#define MLXSW_PCI_WQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_WQE_SIZE)
#define MLXSW_PCI_CQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_CQE_SIZE)
#define MLXSW_PCI_EQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_EQE_SIZE)
#define MLXSW_PCI_EQE_UPDATE_COUNT 0x80
#define MLXSW_PCI_WQE_SG_ENTRIES 3
#define MLXSW_PCI_WQE_TYPE_ETHERNET 0xA
/* pci_wqe_c
* If set it indicates that a completion should be reported upon
* execution of this descriptor.
*/
MLXSW_ITEM32(pci, wqe, c, 0x00, 31, 1);
/* pci_wqe_lp
* Local Processing, set if packet should be processed by the local
* switch hardware:
* For Ethernet EMAD (Direct Route and non Direct Route) -
* must be set if packet destination is local device
* For InfiniBand CTL - must be set if packet destination is local device
* Otherwise it must be clear
* Local Process packets must not exceed the size of 2K (including payload
* and headers).
*/
MLXSW_ITEM32(pci, wqe, lp, 0x00, 30, 1);
/* pci_wqe_type
* Packet type.
*/
MLXSW_ITEM32(pci, wqe, type, 0x00, 23, 4);
/* pci_wqe_byte_count
* Size of i-th scatter/gather entry, 0 if entry is unused.
*/
MLXSW_ITEM16_INDEXED(pci, wqe, byte_count, 0x02, 0, 14, 0x02, 0x00, false);
/* pci_wqe_address
* Physical address of i-th scatter/gather entry.
* Gather Entries must be 2Byte aligned.
*/
MLXSW_ITEM64_INDEXED(pci, wqe, address, 0x08, 0, 64, 0x8, 0x0, false);
/* pci_cqe_lag
* Packet arrives from a port which is a LAG
*/
MLXSW_ITEM32(pci, cqe, lag, 0x00, 23, 1);
/* pci_cqe_system_port/lag_id
* When lag=0: System port on which the packet was received
* When lag=1:
* bits [15:4] LAG ID on which the packet was received
* bits [3:0] sub_port on which the packet was received
*/
MLXSW_ITEM32(pci, cqe, system_port, 0x00, 0, 16);
MLXSW_ITEM32(pci, cqe, lag_id, 0x00, 4, 12);
MLXSW_ITEM32(pci, cqe, lag_port_index, 0x00, 0, 4);
/* pci_cqe_wqe_counter
* WQE count of the WQEs completed on the associated dqn
*/
MLXSW_ITEM32(pci, cqe, wqe_counter, 0x04, 16, 16);
/* pci_cqe_byte_count
* Byte count of received packets including additional two
* Reserved Bytes that are append to the end of the frame.
* Reserved for Send CQE.
*/
MLXSW_ITEM32(pci, cqe, byte_count, 0x04, 0, 14);
/* pci_cqe_trap_id
* Trap ID that captured the packet.
*/
MLXSW_ITEM32(pci, cqe, trap_id, 0x08, 0, 8);
/* pci_cqe_crc
* Length include CRC. Indicates the length field includes
* the packet's CRC.
*/
MLXSW_ITEM32(pci, cqe, crc, 0x0C, 8, 1);
/* pci_cqe_e
* CQE with Error.
*/
MLXSW_ITEM32(pci, cqe, e, 0x0C, 7, 1);
/* pci_cqe_sr
* 1 - Send Queue
* 0 - Receive Queue
*/
MLXSW_ITEM32(pci, cqe, sr, 0x0C, 6, 1);
/* pci_cqe_dqn
* Descriptor Queue (DQ) Number.
*/
MLXSW_ITEM32(pci, cqe, dqn, 0x0C, 1, 5);
/* pci_cqe_owner
* Ownership bit.
*/
MLXSW_ITEM32(pci, cqe, owner, 0x0C, 0, 1);
/* pci_eqe_event_type
* Event type.
*/
MLXSW_ITEM32(pci, eqe, event_type, 0x0C, 24, 8);
#define MLXSW_PCI_EQE_EVENT_TYPE_COMP 0x00
#define MLXSW_PCI_EQE_EVENT_TYPE_CMD 0x0A
/* pci_eqe_event_sub_type
* Event type.
*/
MLXSW_ITEM32(pci, eqe, event_sub_type, 0x0C, 16, 8);
/* pci_eqe_cqn
* Completion Queue that triggeret this EQE.
*/
MLXSW_ITEM32(pci, eqe, cqn, 0x0C, 8, 7);
/* pci_eqe_owner
* Ownership bit.
*/
MLXSW_ITEM32(pci, eqe, owner, 0x0C, 0, 1);
/* pci_eqe_cmd_token
* Command completion event - token
*/
MLXSW_ITEM32(pci, eqe, cmd_token, 0x08, 16, 16);
/* pci_eqe_cmd_status
* Command completion event - status
*/
MLXSW_ITEM32(pci, eqe, cmd_status, 0x08, 0, 8);
/* pci_eqe_cmd_out_param_h
* Command completion event - output parameter - higher part
*/
MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x0C, 0, 32);
/* pci_eqe_cmd_out_param_l
* Command completion event - output parameter - lower part
*/
MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x10, 0, 32);
#endif
#endif
/*
* drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
* Copyright (c) 2015-2016 Mellanox Technologies. All rights reserved.
* Copyright (c) 2015-2016 Jiri Pirko <jiri@mellanox.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _MLXSW_PCI_HW_H
#define _MLXSW_PCI_HW_H
#include <linux/bitops.h>
#include "item.h"
#define MLXSW_PCI_BAR0_SIZE (1024 * 1024) /* 1MB */
#define MLXSW_PCI_PAGE_SIZE 4096
#define MLXSW_PCI_CIR_BASE 0x71000
#define MLXSW_PCI_CIR_IN_PARAM_HI MLXSW_PCI_CIR_BASE
#define MLXSW_PCI_CIR_IN_PARAM_LO (MLXSW_PCI_CIR_BASE + 0x04)
#define MLXSW_PCI_CIR_IN_MODIFIER (MLXSW_PCI_CIR_BASE + 0x08)
#define MLXSW_PCI_CIR_OUT_PARAM_HI (MLXSW_PCI_CIR_BASE + 0x0C)
#define MLXSW_PCI_CIR_OUT_PARAM_LO (MLXSW_PCI_CIR_BASE + 0x10)
#define MLXSW_PCI_CIR_TOKEN (MLXSW_PCI_CIR_BASE + 0x14)
#define MLXSW_PCI_CIR_CTRL (MLXSW_PCI_CIR_BASE + 0x18)
#define MLXSW_PCI_CIR_CTRL_GO_BIT BIT(23)
#define MLXSW_PCI_CIR_CTRL_EVREQ_BIT BIT(22)
#define MLXSW_PCI_CIR_CTRL_OPCODE_MOD_SHIFT 12
#define MLXSW_PCI_CIR_CTRL_STATUS_SHIFT 24
#define MLXSW_PCI_CIR_TIMEOUT_MSECS 1000
#define MLXSW_PCI_SW_RESET 0xF0010
#define MLXSW_PCI_SW_RESET_RST_BIT BIT(0)
#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 5000
#define MLXSW_PCI_FW_READY 0xA1844
#define MLXSW_PCI_FW_READY_MASK 0xFF
#define MLXSW_PCI_FW_READY_MAGIC 0x5E
#define MLXSW_PCI_DOORBELL_SDQ_OFFSET 0x000
#define MLXSW_PCI_DOORBELL_RDQ_OFFSET 0x200
#define MLXSW_PCI_DOORBELL_CQ_OFFSET 0x400
#define MLXSW_PCI_DOORBELL_EQ_OFFSET 0x600
#define MLXSW_PCI_DOORBELL_ARM_CQ_OFFSET 0x800
#define MLXSW_PCI_DOORBELL_ARM_EQ_OFFSET 0xA00
#define MLXSW_PCI_DOORBELL(offset, type_offset, num) \
((offset) + (type_offset) + (num) * 4)
#define MLXSW_PCI_CQS_MAX 96
#define MLXSW_PCI_EQS_COUNT 2
#define MLXSW_PCI_EQ_ASYNC_NUM 0
#define MLXSW_PCI_EQ_COMP_NUM 1
#define MLXSW_PCI_AQ_PAGES 8
#define MLXSW_PCI_AQ_SIZE (MLXSW_PCI_PAGE_SIZE * MLXSW_PCI_AQ_PAGES)
#define MLXSW_PCI_WQE_SIZE 32 /* 32 bytes per element */
#define MLXSW_PCI_CQE_SIZE 16 /* 16 bytes per element */
#define MLXSW_PCI_EQE_SIZE 16 /* 16 bytes per element */
#define MLXSW_PCI_WQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_WQE_SIZE)
#define MLXSW_PCI_CQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_CQE_SIZE)
#define MLXSW_PCI_EQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_EQE_SIZE)
#define MLXSW_PCI_EQE_UPDATE_COUNT 0x80
#define MLXSW_PCI_WQE_SG_ENTRIES 3
#define MLXSW_PCI_WQE_TYPE_ETHERNET 0xA
/* pci_wqe_c
* If set it indicates that a completion should be reported upon
* execution of this descriptor.
*/
MLXSW_ITEM32(pci, wqe, c, 0x00, 31, 1);
/* pci_wqe_lp
* Local Processing, set if packet should be processed by the local
* switch hardware:
* For Ethernet EMAD (Direct Route and non Direct Route) -
* must be set if packet destination is local device
* For InfiniBand CTL - must be set if packet destination is local device
* Otherwise it must be clear
* Local Process packets must not exceed the size of 2K (including payload
* and headers).
*/
MLXSW_ITEM32(pci, wqe, lp, 0x00, 30, 1);
/* pci_wqe_type
* Packet type.
*/
MLXSW_ITEM32(pci, wqe, type, 0x00, 23, 4);
/* pci_wqe_byte_count
* Size of i-th scatter/gather entry, 0 if entry is unused.
*/
MLXSW_ITEM16_INDEXED(pci, wqe, byte_count, 0x02, 0, 14, 0x02, 0x00, false);
/* pci_wqe_address
* Physical address of i-th scatter/gather entry.
* Gather Entries must be 2Byte aligned.
*/
MLXSW_ITEM64_INDEXED(pci, wqe, address, 0x08, 0, 64, 0x8, 0x0, false);
/* pci_cqe_lag
* Packet arrives from a port which is a LAG
*/
MLXSW_ITEM32(pci, cqe, lag, 0x00, 23, 1);
/* pci_cqe_system_port/lag_id
* When lag=0: System port on which the packet was received
* When lag=1:
* bits [15:4] LAG ID on which the packet was received
* bits [3:0] sub_port on which the packet was received
*/
MLXSW_ITEM32(pci, cqe, system_port, 0x00, 0, 16);
MLXSW_ITEM32(pci, cqe, lag_id, 0x00, 4, 12);
MLXSW_ITEM32(pci, cqe, lag_port_index, 0x00, 0, 4);
/* pci_cqe_wqe_counter
* WQE count of the WQEs completed on the associated dqn
*/
MLXSW_ITEM32(pci, cqe, wqe_counter, 0x04, 16, 16);
/* pci_cqe_byte_count
* Byte count of received packets including additional two
* Reserved Bytes that are append to the end of the frame.
* Reserved for Send CQE.
*/
MLXSW_ITEM32(pci, cqe, byte_count, 0x04, 0, 14);
/* pci_cqe_trap_id
* Trap ID that captured the packet.
*/
MLXSW_ITEM32(pci, cqe, trap_id, 0x08, 0, 8);
/* pci_cqe_crc
* Length include CRC. Indicates the length field includes
* the packet's CRC.
*/
MLXSW_ITEM32(pci, cqe, crc, 0x0C, 8, 1);
/* pci_cqe_e
* CQE with Error.
*/
MLXSW_ITEM32(pci, cqe, e, 0x0C, 7, 1);
/* pci_cqe_sr
* 1 - Send Queue
* 0 - Receive Queue
*/
MLXSW_ITEM32(pci, cqe, sr, 0x0C, 6, 1);
/* pci_cqe_dqn
* Descriptor Queue (DQ) Number.
*/
MLXSW_ITEM32(pci, cqe, dqn, 0x0C, 1, 5);
/* pci_cqe_owner
* Ownership bit.
*/
MLXSW_ITEM32(pci, cqe, owner, 0x0C, 0, 1);
/* pci_eqe_event_type
* Event type.
*/
MLXSW_ITEM32(pci, eqe, event_type, 0x0C, 24, 8);
#define MLXSW_PCI_EQE_EVENT_TYPE_COMP 0x00
#define MLXSW_PCI_EQE_EVENT_TYPE_CMD 0x0A
/* pci_eqe_event_sub_type
* Event type.
*/
MLXSW_ITEM32(pci, eqe, event_sub_type, 0x0C, 16, 8);
/* pci_eqe_cqn
* Completion Queue that triggeret this EQE.
*/
MLXSW_ITEM32(pci, eqe, cqn, 0x0C, 8, 7);
/* pci_eqe_owner
* Ownership bit.
*/
MLXSW_ITEM32(pci, eqe, owner, 0x0C, 0, 1);
/* pci_eqe_cmd_token
* Command completion event - token
*/
MLXSW_ITEM32(pci, eqe, cmd_token, 0x08, 16, 16);
/* pci_eqe_cmd_status
* Command completion event - status
*/
MLXSW_ITEM32(pci, eqe, cmd_status, 0x08, 0, 8);
/* pci_eqe_cmd_out_param_h
* Command completion event - output parameter - higher part
*/
MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x0C, 0, 32);
/* pci_eqe_cmd_out_param_l
* Command completion event - output parameter - lower part
*/
MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x10, 0, 32);
#endif
......@@ -37,6 +37,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
......@@ -59,6 +60,7 @@
#include <net/netevent.h>
#include "spectrum.h"
#include "pci.h"
#include "core.h"
#include "reg.h"
#include "port.h"
......@@ -2220,6 +2222,7 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
dev = alloc_etherdev(sizeof(struct mlxsw_sp_port));
if (!dev)
return -ENOMEM;
SET_NETDEV_DEV(dev, mlxsw_sp->bus_info->dev);
mlxsw_sp_port = netdev_priv(dev);
mlxsw_sp_port->dev = dev;
mlxsw_sp_port->mlxsw_sp = mlxsw_sp;
......@@ -3066,8 +3069,7 @@ static struct mlxsw_config_profile mlxsw_sp_config_profile = {
};
static struct mlxsw_driver mlxsw_sp_driver = {
.kind = MLXSW_DEVICE_KIND_SPECTRUM,
.owner = THIS_MODULE,
.kind = mlxsw_sp_driver_name,
.priv_size = sizeof(struct mlxsw_sp),
.init = mlxsw_sp_init,
.fini = mlxsw_sp_fini,
......@@ -4662,6 +4664,16 @@ static struct notifier_block mlxsw_sp_router_netevent_nb __read_mostly = {
.notifier_call = mlxsw_sp_router_netevent_event,
};
static const struct pci_device_id mlxsw_sp_pci_id_table[] = {
{PCI_VDEVICE(MELLANOX, PCI_DEVICE_ID_MELLANOX_SPECTRUM), 0},
{0, },
};
static struct pci_driver mlxsw_sp_pci_driver = {
.name = mlxsw_sp_driver_name,
.id_table = mlxsw_sp_pci_id_table,
};
static int __init mlxsw_sp_module_init(void)
{
int err;
......@@ -4673,8 +4685,15 @@ static int __init mlxsw_sp_module_init(void)
err = mlxsw_core_driver_register(&mlxsw_sp_driver);
if (err)
goto err_core_driver_register;
err = mlxsw_pci_driver_register(&mlxsw_sp_pci_driver);
if (err)
goto err_pci_driver_register;
return 0;
err_pci_driver_register:
mlxsw_core_driver_unregister(&mlxsw_sp_driver);
err_core_driver_register:
unregister_netevent_notifier(&mlxsw_sp_router_netevent_nb);
unregister_inetaddr_notifier(&mlxsw_sp_inetaddr_nb);
......@@ -4684,6 +4703,7 @@ static int __init mlxsw_sp_module_init(void)
static void __exit mlxsw_sp_module_exit(void)
{
mlxsw_pci_driver_unregister(&mlxsw_sp_pci_driver);
mlxsw_core_driver_unregister(&mlxsw_sp_driver);
unregister_netevent_notifier(&mlxsw_sp_router_netevent_nb);
unregister_inetaddr_notifier(&mlxsw_sp_inetaddr_nb);
......@@ -4696,4 +4716,4 @@ module_exit(mlxsw_sp_module_exit);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Jiri Pirko <jiri@mellanox.com>");
MODULE_DESCRIPTION("Mellanox Spectrum driver");
MODULE_MLXSW_DRIVER_ALIAS(MLXSW_DEVICE_KIND_SPECTRUM);
MODULE_DEVICE_TABLE(pci, mlxsw_sp_pci_id_table);
......@@ -1980,7 +1980,7 @@ int mlxsw_sp_router_init(struct mlxsw_sp *mlxsw_sp)
if (err)
goto err_vrs_init;
err = mlxsw_sp_neigh_init(mlxsw_sp);
err = mlxsw_sp_neigh_init(mlxsw_sp);
if (err)
goto err_neigh_init;
......
......@@ -37,6 +37,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/slab.h>
......@@ -46,6 +47,7 @@
#include <net/switchdev.h>
#include <generated/utsrelease.h>
#include "pci.h"
#include "core.h"
#include "reg.h"
#include "port.h"
......@@ -966,6 +968,7 @@ static int mlxsw_sx_port_create(struct mlxsw_sx *mlxsw_sx, u8 local_port)
dev = alloc_etherdev(sizeof(struct mlxsw_sx_port));
if (!dev)
return -ENOMEM;
SET_NETDEV_DEV(dev, mlxsw_sx->bus_info->dev);
mlxsw_sx_port = netdev_priv(dev);
mlxsw_sx_port->dev = dev;
mlxsw_sx_port->mlxsw_sx = mlxsw_sx;
......@@ -1544,8 +1547,7 @@ static struct mlxsw_config_profile mlxsw_sx_config_profile = {
};
static struct mlxsw_driver mlxsw_sx_driver = {
.kind = MLXSW_DEVICE_KIND_SWITCHX2,
.owner = THIS_MODULE,
.kind = mlxsw_sx_driver_name,
.priv_size = sizeof(struct mlxsw_sx),
.init = mlxsw_sx_init,
.fini = mlxsw_sx_fini,
......@@ -1554,13 +1556,38 @@ static struct mlxsw_driver mlxsw_sx_driver = {
.profile = &mlxsw_sx_config_profile,
};
static const struct pci_device_id mlxsw_sx_pci_id_table[] = {
{PCI_VDEVICE(MELLANOX, PCI_DEVICE_ID_MELLANOX_SWITCHX2), 0},
{0, },
};
static struct pci_driver mlxsw_sx_pci_driver = {
.name = mlxsw_sx_driver_name,
.id_table = mlxsw_sx_pci_id_table,
};
static int __init mlxsw_sx_module_init(void)
{
return mlxsw_core_driver_register(&mlxsw_sx_driver);
int err;
err = mlxsw_core_driver_register(&mlxsw_sx_driver);
if (err)
return err;
err = mlxsw_pci_driver_register(&mlxsw_sx_pci_driver);
if (err)
goto err_pci_driver_register;
return 0;
err_pci_driver_register:
mlxsw_core_driver_unregister(&mlxsw_sx_driver);
return err;
}
static void __exit mlxsw_sx_module_exit(void)
{
mlxsw_pci_driver_unregister(&mlxsw_sx_pci_driver);
mlxsw_core_driver_unregister(&mlxsw_sx_driver);
}
......@@ -1570,4 +1597,4 @@ module_exit(mlxsw_sx_module_exit);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Jiri Pirko <jiri@mellanox.com>");
MODULE_DESCRIPTION("Mellanox SwitchX-2 driver");
MODULE_MLXSW_DRIVER_ALIAS(MLXSW_DEVICE_KIND_SWITCHX2);
MODULE_DEVICE_TABLE(pci, mlxsw_sx_pci_id_table);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment