Commit d5d531cb authored by David Ahern's avatar David Ahern Committed by David S. Miller

net: ipv6: Add extack messages for route add failures

Add messages for non-obvious errors (e.g, no need to add text for malloc
failures or ENODEV failures). This mostly covers the annoying EINVAL errors
Some message strings violate the 80-columns but searchable strings need to
trump that rule.
Signed-off-by: default avatarDavid Ahern <dsahern@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 333c4301
......@@ -498,6 +498,8 @@ static struct fib6_node *fib6_add_1(struct fib6_node *root,
!ipv6_prefix_equal(&key->addr, addr, fn->fn_bit)) {
if (!allow_create) {
if (replace_required) {
NL_SET_ERR_MSG(extack,
"Can not replace route - no match found");
pr_warn("Can't replace route, no match found\n");
return ERR_PTR(-ENOENT);
}
......@@ -544,6 +546,8 @@ static struct fib6_node *fib6_add_1(struct fib6_node *root,
* That would keep IPv6 consistent with IPv4
*/
if (replace_required) {
NL_SET_ERR_MSG(extack,
"Can not replace route - no match found");
pr_warn("Can't replace route, no match found\n");
return ERR_PTR(-ENOENT);
}
......
......@@ -1857,14 +1857,25 @@ static struct rt6_info *ip6_route_info_create(struct fib6_config *cfg,
int err = -EINVAL;
/* RTF_PCPU is an internal flag; can not be set by userspace */
if (cfg->fc_flags & RTF_PCPU)
if (cfg->fc_flags & RTF_PCPU) {
NL_SET_ERR_MSG(extack, "Userspace can not set RTF_PCPU");
goto out;
}
if (cfg->fc_dst_len > 128 || cfg->fc_src_len > 128)
if (cfg->fc_dst_len > 128) {
NL_SET_ERR_MSG(extack, "Invalid prefix length");
goto out;
}
if (cfg->fc_src_len > 128) {
NL_SET_ERR_MSG(extack, "Invalid source address length");
goto out;
}
#ifndef CONFIG_IPV6_SUBTREES
if (cfg->fc_src_len)
if (cfg->fc_src_len) {
NL_SET_ERR_MSG(extack,
"Specifying source address requires IPV6_SUBTREES to be enabled");
goto out;
}
#endif
if (cfg->fc_ifindex) {
err = -ENODEV;
......@@ -2015,9 +2026,10 @@ static struct rt6_info *ip6_route_info_create(struct fib6_config *cfg,
err = -EINVAL;
if (ipv6_chk_addr_and_flags(net, gw_addr,
gwa_type & IPV6_ADDR_LINKLOCAL ?
dev : NULL, 0, 0))
dev : NULL, 0, 0)) {
NL_SET_ERR_MSG(extack, "Invalid gateway address");
goto out;
}
rt->rt6i_gateway = *gw_addr;
if (gwa_type != (IPV6_ADDR_LINKLOCAL|IPV6_ADDR_UNICAST)) {
......@@ -2033,8 +2045,11 @@ static struct rt6_info *ip6_route_info_create(struct fib6_config *cfg,
addressing
*/
if (!(gwa_type & (IPV6_ADDR_UNICAST |
IPV6_ADDR_MAPPED)))
IPV6_ADDR_MAPPED))) {
NL_SET_ERR_MSG(extack,
"Invalid gateway address");
goto out;
}
if (cfg->fc_table) {
grt = ip6_nh_lookup_table(net, cfg, gw_addr);
......@@ -2074,8 +2089,14 @@ static struct rt6_info *ip6_route_info_create(struct fib6_config *cfg,
goto out;
}
err = -EINVAL;
if (!dev || (dev->flags & IFF_LOOPBACK))
if (!dev) {
NL_SET_ERR_MSG(extack, "Egress device not specified");
goto out;
} else if (dev->flags & IFF_LOOPBACK) {
NL_SET_ERR_MSG(extack,
"Egress device can not be loopback device for this route");
goto out;
}
}
err = -ENODEV;
......@@ -2084,6 +2105,7 @@ static struct rt6_info *ip6_route_info_create(struct fib6_config *cfg,
if (!ipv6_addr_any(&cfg->fc_prefsrc)) {
if (!ipv6_chk_addr(net, &cfg->fc_prefsrc, dev, 0)) {
NL_SET_ERR_MSG(extack, "Invalid source address");
err = -EINVAL;
goto out;
}
......@@ -2234,8 +2256,10 @@ static int ip6_route_del(struct fib6_config *cfg,
int err = -ESRCH;
table = fib6_get_table(cfg->fc_nlinfo.nl_net, cfg->fc_table);
if (!table)
if (!table) {
NL_SET_ERR_MSG(extack, "FIB table does not exist");
return err;
}
read_lock_bh(&table->tb6_lock);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment