iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data()

The spi_get_device_match_data() helps to get driver data from the
firmware node or SPI ID table. Use it instead of open coding.

While at it, switch ID tables to provide an acrual pointers to
the configuration data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230102173450.29882-2-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/adc/ti-adc128s052.c

@@ -139,16 +139,11 @@ static void adc128_disable_regulator(void *reg)
 
 static int adc128_probe(struct spi_device *spi)
 {
+	const struct adc128_configuration *config;
 	struct iio_dev *indio_dev;
-	unsigned int config;
 	struct adc128 *adc;
 	int ret;
 
-	if (dev_fwnode(&spi->dev))
-		config = (unsigned long) device_get_match_data(&spi->dev);
-	else
-		config = spi_get_device_id(spi)->driver_data;
-
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -160,8 +155,10 @@ static int adc128_probe(struct spi_device *spi)
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &adc128_info;
 
-	indio_dev->channels = adc128_config[config].channels;
-	indio_dev->num_channels = adc128_config[config].num_channels;
+	config = spi_get_device_match_data(spi);
+
+	indio_dev->channels = config->channels;
+	indio_dev->num_channels = config->num_channels;
 
 	adc->reg = devm_regulator_get(&spi->dev, "vref");
 	if (IS_ERR(adc->reg))
@@ -181,32 +178,32 @@ static int adc128_probe(struct spi_device *spi)
 }
 
 static const struct of_device_id adc128_of_match[] = {
-	{ .compatible = "ti,adc128s052", .data = (void*)0L, },
-	{ .compatible = "ti,adc122s021", .data = (void*)1L, },
-	{ .compatible = "ti,adc122s051", .data = (void*)1L, },
-	{ .compatible = "ti,adc122s101", .data = (void*)1L, },
-	{ .compatible = "ti,adc124s021", .data = (void*)2L, },
-	{ .compatible = "ti,adc124s051", .data = (void*)2L, },
-	{ .compatible = "ti,adc124s101", .data = (void*)2L, },
+	{ .compatible = "ti,adc128s052", .data = &adc128_config[0] },
+	{ .compatible = "ti,adc122s021", .data = &adc128_config[1] },
+	{ .compatible = "ti,adc122s051", .data = &adc128_config[1] },
+	{ .compatible = "ti,adc122s101", .data = &adc128_config[1] },
+	{ .compatible = "ti,adc124s021", .data = &adc128_config[2] },
+	{ .compatible = "ti,adc124s051", .data = &adc128_config[2] },
+	{ .compatible = "ti,adc124s101", .data = &adc128_config[2] },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, adc128_of_match);
 
 static const struct spi_device_id adc128_id[] = {
-	{ "adc128s052", 0 },	/* index into adc128_config */
-	{ "adc122s021",	1 },
-	{ "adc122s051",	1 },
-	{ "adc122s101",	1 },
-	{ "adc124s021", 2 },
-	{ "adc124s051", 2 },
-	{ "adc124s101", 2 },
+	{ "adc128s052", (kernel_ulong_t)&adc128_config[0] },
+	{ "adc122s021",	(kernel_ulong_t)&adc128_config[1] },
+	{ "adc122s051",	(kernel_ulong_t)&adc128_config[1] },
+	{ "adc122s101",	(kernel_ulong_t)&adc128_config[1] },
+	{ "adc124s021", (kernel_ulong_t)&adc128_config[2] },
+	{ "adc124s051", (kernel_ulong_t)&adc128_config[2] },
+	{ "adc124s101", (kernel_ulong_t)&adc128_config[2] },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, adc128_id);
 
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id adc128_acpi_match[] = {
-	{ "AANT1280", 2 }, /* ADC124S021 compatible ACPI ID */
+	{ "AANT1280", (kernel_ulong_t)&adc128_config[2] },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, adc128_acpi_match);