Skip to content

L
linux
Commit d5f4ac86 authored by Bjorn Andersson's avatar Bjorn Andersson
Browse files
Options

arm64: dts: qcom: db820c: Sort all nodes 

Sort all nodes in db820c.dtsi based on address, then name.
Acked-by: default avatarVinod Koul <vkoul@kernel.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 7b494cc4
Hide whitespace changes
Inline Side-by-side
Showing with 168 additions and 168 deletions
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
View file @ d5f4ac86
......@@ -124,6 +124,18 @@ wlan_en: wlan-en-1-8v {
};
};
&blsp1_i2c2 {
/* On Low speed expansion */
label = "LS-I2C0";
status = "okay";
};
&blsp1_spi0 {
/* On Low speed expansion */
label = "LS-SPI0";
status = "okay";
};
&blsp1_uart1 {
label = "BT-UART";
status = "okay";
......@@ -141,6 +153,24 @@ bluetooth {
};
};
&blsp2_i2c0 {
/* On High speed expansion */
label = "HS-I2C2";
status = "okay";
};
&blsp2_i2c1 {
/* On Low speed expansion */
label = "LS-I2C1";
status = "okay";
};
&blsp2_spi5 {
/* On High speed expansion */
label = "HS-SPI1";
status = "okay";
};
&blsp2_uart1 {
label = "LS-UART1";
status = "okay";
......@@ -157,75 +187,49 @@ &blsp2_uart2 {
pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
};
&blsp1_i2c2 {
/* On Low speed expansion */
label = "LS-I2C0";
status = "okay";
&camss {
vdda-supply = <&pm8994_l2>;
};
&blsp2_i2c1 {
/* On Low speed expansion */
label = "LS-I2C1";
&hdmi {
status = "okay";
};
&blsp1_spi0 {
/* On Low speed expansion */
label = "LS-SPI0";
status = "okay";
};
pinctrl-names = "default", "sleep";
pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
&blsp2_i2c0 {
/* On High speed expansion */
label = "HS-I2C2";
status = "okay";
core-vdda-supply = <&pm8994_l12>;
core-vcc-supply = <&pm8994_s4>;
};
&blsp2_spi5 {
/* On High speed expansion */
label = "HS-SPI1";
&hdmi_phy {
status = "okay";
};
&camss {
vdda-supply = <&pm8994_l2>;
vddio-supply = <&pm8994_l12>;
vcca-supply = <&pm8994_l28>;
#phy-cells = <0>;
};
&sdhc2 {
/* External SD card */
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&msmgpio 38 0x1>;
vmmc-supply = <&pm8994_l21>;
vqmmc-supply = <&pm8994_l13>;
&hsusb_phy1 {
status = "okay";
vdda-pll-supply = <&pm8994_l12>;
vdda-phy-dpdm-supply = <&pm8994_l24>;
};
&ufsphy {
&hsusb_phy2 {
status = "okay";
vdda-phy-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
vdda-phy-max-microamp = <18380>;
vdda-pll-max-microamp = <9440>;
vddp-ref-clk-supply = <&pm8994_l25>;
vddp-ref-clk-max-microamp = <100>;
vddp-ref-clk-always-on;
vdda-phy-dpdm-supply = <&pm8994_l24>;
};
&ufshc {
&mdp {
status = "okay";
};
vcc-supply = <&pm8994_l20>;
vccq-supply = <&pm8994_l25>;
vccq2-supply = <&pm8994_s4>;
vcc-max-microamp = <600000>;
vccq-max-microamp = <450000>;
vccq2-max-microamp = <450000>;
&mdss {
status = "okay";
};
&msmgpio {
......@@ -382,6 +386,32 @@ &msmgpio {
"NC"; /* GPIO_149 */
};
&pcie0 {
status = "okay";
perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&wlan_en>;
vdda-supply = <&pm8994_l28>;
};
&pcie1 {
status = "okay";
perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
vdda-supply = <&pm8994_l28>;
};
&pcie2 {
status = "okay";
perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
vdda-supply = <&pm8994_l28>;
};
&pcie_phy {
status = "okay";
vdda-phy-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
};
&pm8994_gpios {
gpio-line-names =
"NC",
......@@ -434,114 +464,6 @@ &pmi8994_gpios {
"NC";
};
&pcie_phy {
status = "okay";
vdda-phy-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
};
&usb3phy {
status = "okay";
vdda-phy-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
};
&hsusb_phy1 {
status = "okay";
vdda-pll-supply = <&pm8994_l12>;
vdda-phy-dpdm-supply = <&pm8994_l24>;
};
&hsusb_phy2 {
status = "okay";
vdda-pll-supply = <&pm8994_l12>;
vdda-phy-dpdm-supply = <&pm8994_l24>;
};
&usb3 {
status = "okay";
extcon = <&usb3_id>;
dwc3@6a00000 {
extcon = <&usb3_id>;
dr_mode = "otg";
};
};
&usb2 {
status = "okay";
extcon = <&usb2_id>;
dwc3@7600000 {
extcon = <&usb2_id>;
dr_mode = "otg";
maximum-speed = "high-speed";
};
};
&pcie0 {
status = "okay";
perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&wlan_en>;
vdda-supply = <&pm8994_l28>;
};
&pcie1 {
status = "okay";
perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
vdda-supply = <&pm8994_l28>;
};
&pcie2 {
status = "okay";
perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
vdda-supply = <&pm8994_l28>;
};
&wcd9335 {
clock-names = "mclk", "slimbus";
clocks = <&div1_mclk>,
<&rpmcc RPM_SMD_BB_CLK1>;
vdd-buck-supply = <&pm8994_s4>;
vdd-buck-sido-supply = <&pm8994_s4>;
vdd-tx-supply = <&pm8994_s4>;
vdd-rx-supply = <&pm8994_s4>;
vdd-io-supply = <&pm8994_s4>;
};
&mdss {
status = "okay";
};
&mdp {
status = "okay";
};
&hdmi_phy {
status = "okay";
vddio-supply = <&pm8994_l12>;
vcca-supply = <&pm8994_l28>;
#phy-cells = <0>;
};
&hdmi {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
core-vdda-supply = <&pm8994_l12>;
core-vcc-supply = <&pm8994_s4>;
};
&rpm_requests {
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
......@@ -698,18 +620,15 @@ pm8994_l32: l32 {
};
};
&spmi_bus {
pmic@0 {
pon@800 {
resin {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_VOLUMEDOWN>;
};
};
};
&sdhc2 {
/* External SD card */
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&msmgpio 38 0x1>;
vmmc-supply = <&pm8994_l21>;
vqmmc-supply = <&pm8994_l13>;
status = "okay";
};
&sound {
......@@ -783,3 +702,84 @@ codec {
};
};
};
&spmi_bus {
pmic@0 {
pon@800 {
resin {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_VOLUMEDOWN>;
};
};
};
};
&ufsphy {
status = "okay";
vdda-phy-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
vdda-phy-max-microamp = <18380>;
vdda-pll-max-microamp = <9440>;
vddp-ref-clk-supply = <&pm8994_l25>;
vddp-ref-clk-max-microamp = <100>;
vddp-ref-clk-always-on;
};
&ufshc {
status = "okay";
vcc-supply = <&pm8994_l20>;
vccq-supply = <&pm8994_l25>;
vccq2-supply = <&pm8994_s4>;
vcc-max-microamp = <600000>;
vccq-max-microamp = <450000>;
vccq2-max-microamp = <450000>;
};
&usb2 {
status = "okay";
extcon = <&usb2_id>;
dwc3@7600000 {
extcon = <&usb2_id>;
dr_mode = "otg";
maximum-speed = "high-speed";
};
};
&usb3 {
status = "okay";
extcon = <&usb3_id>;
dwc3@6a00000 {
extcon = <&usb3_id>;
dr_mode = "otg";
};
};
&usb3phy {
status = "okay";
vdda-phy-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
};
&wcd9335 {
clock-names = "mclk", "slimbus";
clocks = <&div1_mclk>,
<&rpmcc RPM_SMD_BB_CLK1>;
vdd-buck-supply = <&pm8994_s4>;
vdd-buck-sido-supply = <&pm8994_s4>;
vdd-tx-supply = <&pm8994_s4>;
vdd-rx-supply = <&pm8994_s4>;
vdd-io-supply = <&pm8994_s4>;
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7