Commit d63f2a88 authored by Rob Herring's avatar Rob Herring Committed by Mark Brown

ASoC: mt6359: Drop ASoC mt6359 ASoC accdet jack document

This reverts commit e61c5895.

The binding document has lots of schema errors and there's been no
effort to fix them, so let's remove it.

Cc: Argus Lin <argus.lin@mediatek.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210416180118.3662904-1-robh@kernel.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent fa2f9837
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/mt6359-accdet.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek Technologies Inc. MT6359 ASoC accdet jack driver bindings
maintainers:
- Chipeng Chang <chipeng.chang@mediatek.com>
description: |
This binding describes the Mediatek Technologies MT6359 ASoC
accdet jack driver.
properties:
mediatek,accdet-name:
maxItems: 1
description: named as "mt6359-accdet" jack.
mediatek,mic-vol:
maxItems: 1
description: |
accdet micbias1 voltage.
enum:
- 0x00 # 1.7v - micbias1 volage is 1.7v.
- 0x01 # 1.8v - micbias1 volage is 1.8v.
- 0x02 # 1.9v - micbias1 volage is 1.9v.
- 0x03 # 2.0v - micbias1 volage is 2.0v.
- 0x04 # 2.1v - micbias1 volage is 2.1v.
- 0x05 # 2.5v - micbias1 volage is 2.5v.
- 0x06 # 2.6v - micbias1 volage is 2.6v.
- 0x07 # 2.7v - micbias1 volage is 2.7v.
- 0x08 # 2.8v - micbias1 volage is 2.8v.
- 0x09 # 2.85v - micbias1 volage is 2.85v.
mediatek,mic-mode:
maxItems: 1
description: |
value as 1, 2, 6 to indicate ACC/DCC mode. default is DCC mode 2.
enum:
- 0x01 # ACC - ACC mode.
- 0x02 # DCC - low cost without in bias.
- 0x06 # DCC - low cost with in bias.
mediatek,pwm-deb-setting:
maxItems: 15
description: |
headset-mode-setting : Indicates customized pwm, debounce setting
accdet pwm_width, pwm_thresh, fall_delay, rise_delay
debounce0, debounce1, debounce3, debounce4
eint pwm_width, eint pwm_thresh
eint deb(debounce0, debounce1, debounce2, debounce3), inv_debounce.
mediatek,eint-use-ap:
maxItems: 1
description: |
indicates to use ap gpio.
enum:
- 0x00 # MT6359 eint detection mode.
- 0x01 # SoC GPIO detection mode.
mediatek,eint-detect-mode:
maxItems: 1
description: |
indicates to use ap gpio.
enum:
- 0x00 # detection mode with higher detection power.
- 0x01 # detection mode with lower detection power.
- 0x02 # detection mode with sw moisture detection mode.
- 0x03 # detection mode with hw moisture detection mode1.
- 0x04 # detection mode with hw moisture detection mode2.
mediatek,eint-num:
maxItems: 1
description: |
incicates pmic eint usage.
enum:
- 0x0 # PMIC_EINT0 - use pmic eint0 to trigger plug interrupt.
- 0x1 # PMIC_EINT1 - use pmic eint1 to trigger plug interrupt.
- 0x2 # PMIC_BI_EINT - use pmic eint0/1 to trigger plug interrupt.
mediatek,eint-trig-mode:
maxItems: 1
description: |
incicates pmic eint trigger mode.
enum:
- 0x0 # PMIC_GPIO - use pmic gpio to detect plug status.
- 0x1 # PMIC_INVERTER - use pmic inverter to detect plug status.
mediatek,eint-use-ext-res:
maxItems: 1
description: |
select HP_EINT pull up resistance, default 0 use internal resistance.
enum:
- 0x0 # use internal resistor.
- 0x1 # use external resistor.
mediatek,eint-comp-vth:
maxItems: 1
description: |
indicates comparator detection voltage.
enum:
- 0x00 # 2.8v.
- 0x01 # 2.4v.
- 0x02 # 2.0v.
- 0x03 # 0.7v.
mediatek,key-mode:
maxItems: 1
description: |
incicates key mode type.
enum:
- 0x0 # THREE_KEY - support 3-key key mode.
- 0x1 # FOUR_KEY - support 4-key key mode.
- 0x2 # TRI_KEY_CDD - support 3-key google CDD key mode.
mediatek,three-key-thr:
maxItems: 4
description: |
3 key device detection threshold: 0--MD_MAX--UP_MAX--DW_MAX.
mediatek,tri-key-cdd-thr:
maxItems: 4
description: |
3 key CDD device detection threshold: 0--MD_MAX--UP_MAX--DW_MAX.
mediatek,four-key-thr:
maxItems: 4
description: |
4 key device detection threshold: 0--MD_MAX--VOICE_MAX--UP_MAX--DW_MAX.
additionalProperties: false
examples:
- |
accdet: accdet {
mediatek,accdet-name = "mt6359-accdet";
mediatek,mic-vol = <8>;
mediatek,mic-mode = <2>;
mediatek,pwm-deb-setting = <0x500 0x500 1 0x1f0
0x800 0x800 0x20 0x44
0x4 0x1
0x5 0x3 0x3 0x5 0xe>;
mediatek,eint-use-ap = <0>;
mediatek,eint-detect-mode = <4>;
mediatek,eint-num = <0>;
mediatek,eint-trig-mode = <1>;
mediatek,eint-use-ext-res = <0>;
mediatek,eint-comp-vth = <2>;
mediatek,key-mode = <0>;
mediatek,three-key-thr = <0 80 220 400>;
status = "okay";
};
...
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment