Staging: comedi: remove C99 comments in adv_pci1723.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/comedi/drivers/adv_pci1723.c

@@ -54,7 +54,7 @@ configures all channels in the same group.
 
 #define ADVANTECH_VENDOR        0x13fe	/* Advantech PCI vendor ID */
 
-// hardware types of the cards
+/* hardware types of the cards */
 #define TYPE_PCI1723 0
 
 #define IORANGE_1723  0x2A
@@ -92,7 +92,7 @@ configures all channels in the same group.
 
 #define PCI1723_SELECT_CALIBRATION 0x28	/* Select the calibration Ref_V */
 
-//static unsigned short pci_list_builded=0;     /*=1 list of card is know */
+/* static unsigned short pci_list_builded=0;      =1 list of card is know */
 
 static const struct comedi_lrange range_pci1723 = { 1, {
 			BIP_RANGE(10)
@@ -104,14 +104,14 @@ static const struct comedi_lrange range_pci1723 = { 1, {
  */
 struct pci1723_board {
 	const char *name;
-	int vendor_id;		// PCI vendor a device ID of card
+	int vendor_id;		/*  PCI vendor a device ID of card */
 	int device_id;
 	int iorange;
 	char cardtype;
-	int n_aochan;		// num of D/A chans
-	int n_diochan;		// num of DIO chans
-	int ao_maxdata;		// resolution of D/A
-	const struct comedi_lrange *rangelist_ao;	// rangelist for D/A
+	int n_aochan;		/*  num of D/A chans */
+	int n_diochan;		/*  num of DIO chans */
+	int ao_maxdata;		/*  resolution of D/A */
+	const struct comedi_lrange *rangelist_ao;	/*  rangelist for D/A */
 };
 
 static const struct pci1723_board boardtypes[] = {
@@ -157,12 +157,12 @@ static struct comedi_driver driver_pci1723 = {
 
 /* this structure is for data unique to this hardware driver. */
 struct pci1723_private {
-	int valid;		//card is usable;
+	int valid;		/* card is usable; */
 
 	struct pci_dev *pcidev;
-	unsigned char da_range[8];	// D/A output range for each channel
+	unsigned char da_range[8];	/*  D/A output range for each channel */
 
-	short ao_data[8];	// data output buffer
+	short ao_data[8];	/*  data output buffer */
 };
 
 /*the following macro to make it easy to
@@ -180,22 +180,22 @@ static int pci1723_reset(struct comedi_device * dev)
 	int i;
 	DPRINTK("adv_pci1723 EDBG: BGN: pci1723_reset(...)\n");
 
-	outw(0x01, dev->iobase + PCI1723_SYN_SET);	// set synchronous output mode
+	outw(0x01, dev->iobase + PCI1723_SYN_SET);	/*  set synchronous output mode */
 
 	for (i = 0; i < 8; i++) {
-		// set all outputs to 0V
+		/*  set all outputs to 0V */
 		devpriv->ao_data[i] = 0x8000;
 		outw(devpriv->ao_data[i], dev->iobase + PCI1723_DA(i));
-		// set all ranges to +/- 10V
+		/*  set all ranges to +/- 10V */
 		devpriv->da_range[i] = 0;
 		outw(((devpriv->da_range[i] << 4) | i),
 			PCI1723_RANGE_CALIBRATION_MODE);
 	}
 
-	outw(0, dev->iobase + PCI1723_CHANGE_CHA_OUTPUT_TYPE_STROBE);	// update ranges
-	outw(0, dev->iobase + PCI1723_SYN_STROBE);	// update outputs
+	outw(0, dev->iobase + PCI1723_CHANGE_CHA_OUTPUT_TYPE_STROBE);	/*  update ranges */
+	outw(0, dev->iobase + PCI1723_SYN_STROBE);	/*  update outputs */
 
-	// set asynchronous output mode
+	/*  set asynchronous output mode */
 	outw(0, dev->iobase + PCI1723_SYN_SET);
 
 	DPRINTK("adv_pci1723 EDBG: END: pci1723_reset(...)\n");
@@ -265,12 +265,12 @@ static int pci1723_dio_insn_config(struct comedi_device * dev, struct comedi_sub
 		return -EINVAL;
 	}
 
-	// update hardware DIO mode
-	dio_mode = 0x0000;	// low byte output, high byte output
+	/*  update hardware DIO mode */
+	dio_mode = 0x0000;	/*  low byte output, high byte output */
 	if ((s->io_bits & 0x00FF) == 0)
-		dio_mode |= 0x0001;	// low byte input
+		dio_mode |= 0x0001;	/*  low byte input */
 	if ((s->io_bits & 0xFF00) == 0)
-		dio_mode |= 0x0002;	// high byte input
+		dio_mode |= 0x0002;	/*  high byte input */
 	outw(dio_mode, dev->iobase + PCI1723_DIGITAL_IO_PORT_SET);
 	return 1;
 }
@@ -389,22 +389,22 @@ static int pci1723_attach(struct comedi_device * dev, struct comedi_devconfig *
 		s->insn_write = pci1723_ao_write_winsn;
 		s->insn_read = pci1723_insn_read_ao;
 
-		// read DIO config
+		/*  read DIO config */
 		switch (inw(dev->iobase + PCI1723_DIGITAL_IO_PORT_MODE) & 0x03) {
-		case 0x00:	// low byte output, high byte output
+		case 0x00:	/*  low byte output, high byte output */
 			s->io_bits = 0xFFFF;
 			break;
-		case 0x01:	// low byte input, high byte output
+		case 0x01:	/*  low byte input, high byte output */
 			s->io_bits = 0xFF00;
 			break;
-		case 0x02:	// low byte output, high byte input
+		case 0x02:	/*  low byte output, high byte input */
 			s->io_bits = 0x00FF;
 			break;
-		case 0x03:	// low byte input, high byte input
+		case 0x03:	/*  low byte input, high byte input */
 			s->io_bits = 0x0000;
 			break;
 		}
-		// read DIO port state
+		/*  read DIO port state */
 		s->state = inw(dev->iobase + PCI1723_READ_DIGITAL_INPUT_DATA);
 
 		subdev++;