Commit d6f087ec authored by Michael Hennerich's avatar Michael Hennerich Committed by Greg Kroah-Hartman

staging: IIO: ADC: New driver for the AD7780 / AD7781 24-bit Sigma-Delta ADC

Changes since v1:

IIO: ADC: AD7780: Apply review feedback

Abort probe() with error in case platform_data is not present.
Add comment explaining power down reset (PDRST) GPIO handling
and dual function DOUT/RDY interrupt usage.
Signed-off-by: default avatarMichael Hennerich <michael.hennerich@analog.com>
Acked-by: default avatarJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 8a789f8c
...@@ -142,6 +142,17 @@ config AD7887 ...@@ -142,6 +142,17 @@ config AD7887
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called ad7887. module will be called ad7887.
config AD7780
tristate "Analog Devices AD7780 AD7781 ADC driver"
depends on SPI
help
Say yes here to build support for Analog Devices
AD7780 and AD7781 SPI analog to digital convertors (ADC).
If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
module will be called ad7780.
config AD7745 config AD7745
tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver" tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver"
depends on I2C depends on I2C
......
...@@ -34,6 +34,7 @@ obj-$(CONFIG_AD7152) += ad7152.o ...@@ -34,6 +34,7 @@ obj-$(CONFIG_AD7152) += ad7152.o
obj-$(CONFIG_AD7291) += ad7291.o obj-$(CONFIG_AD7291) += ad7291.o
obj-$(CONFIG_AD7314) += ad7314.o obj-$(CONFIG_AD7314) += ad7314.o
obj-$(CONFIG_AD7745) += ad7745.o obj-$(CONFIG_AD7745) += ad7745.o
obj-$(CONFIG_AD7780) += ad7780.o
obj-$(CONFIG_AD7816) += ad7816.o obj-$(CONFIG_AD7816) += ad7816.o
obj-$(CONFIG_ADT75) += adt75.o obj-$(CONFIG_ADT75) += adt75.o
obj-$(CONFIG_ADT7310) += adt7310.o obj-$(CONFIG_ADT7310) += adt7310.o
......
/*
* AD7780/AD7781 SPI ADC driver
*
* Copyright 2011 Analog Devices Inc.
*
* Licensed under the GPL-2.
*/
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/list.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/gpio.h>
#include "../iio.h"
#include "../sysfs.h"
#include "../ring_generic.h"
#include "adc.h"
#include "ad7780.h"
#define AD7780_RDY (1 << 7)
#define AD7780_FILTER (1 << 6)
#define AD7780_ERR (1 << 5)
#define AD7780_ID1 (1 << 4)
#define AD7780_ID0 (1 << 3)
#define AD7780_GAIN (1 << 2)
#define AD7780_PAT1 (1 << 1)
#define AD7780_PAT0 (1 << 0)
struct ad7780_chip_info {
u8 bits;
u8 storagebits;
u8 res_shift;
};
struct ad7780_state {
struct iio_dev *indio_dev;
struct spi_device *spi;
const struct ad7780_chip_info *chip_info;
struct regulator *reg;
struct ad7780_platform_data *pdata;
wait_queue_head_t wq_data_avail;
bool done;
u16 int_vref_mv;
struct spi_transfer xfer;
struct spi_message msg;
/*
* DMA (thus cache coherency maintenance) requires the
* transfer buffers to live in their own cache lines.
*/
unsigned int data ____cacheline_aligned;
};
enum ad7780_supported_device_ids {
ID_AD7780,
ID_AD7781,
};
static int ad7780_read(struct ad7780_state *st, int *val)
{
int ret;
spi_bus_lock(st->spi->master);
enable_irq(st->spi->irq);
st->done = false;
gpio_set_value(st->pdata->gpio_pdrst, 1);
ret = wait_event_interruptible(st->wq_data_avail, st->done);
disable_irq_nosync(st->spi->irq);
if (ret)
goto out;
ret = spi_sync_locked(st->spi, &st->msg);
*val = be32_to_cpu(st->data);
out:
gpio_set_value(st->pdata->gpio_pdrst, 0);
spi_bus_unlock(st->spi->master);
return ret;
}
static ssize_t ad7780_scan(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev *dev_info = dev_get_drvdata(dev);
struct ad7780_state *st = dev_info->dev_data;
int ret, val, smpl;
mutex_lock(&dev_info->mlock);
ret = ad7780_read(st, &smpl);
mutex_unlock(&dev_info->mlock);
if (ret < 0)
return ret;
if ((smpl & AD7780_ERR) ||
!((smpl & AD7780_PAT0) && !(smpl & AD7780_PAT1)))
return -EIO;
val = (smpl >> st->chip_info->res_shift) &
((1 << (st->chip_info->bits)) - 1);
val -= (1 << (st->chip_info->bits - 1));
if (!(smpl & AD7780_GAIN))
val *= 128;
return sprintf(buf, "%d\n", val);
}
static IIO_DEV_ATTR_IN_RAW(0, ad7780_scan, 0);
static ssize_t ad7780_show_scale(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev *dev_info = dev_get_drvdata(dev);
struct ad7780_state *st = iio_dev_get_devdata(dev_info);
/* Corresponds to Vref / 2^(bits-1) */
unsigned int scale = (st->int_vref_mv * 100000) >>
(st->chip_info->bits - 1);
return sprintf(buf, "%d.%05d\n", scale / 100000, scale % 100000);
}
static IIO_DEVICE_ATTR(in_scale, S_IRUGO, ad7780_show_scale, NULL, 0);
static ssize_t ad7780_show_name(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev *dev_info = dev_get_drvdata(dev);
struct ad7780_state *st = iio_dev_get_devdata(dev_info);
return sprintf(buf, "%s\n", spi_get_device_id(st->spi)->name);
}
static IIO_DEVICE_ATTR(name, S_IRUGO, ad7780_show_name, NULL, 0);
static struct attribute *ad7780_attributes[] = {
&iio_dev_attr_in0_raw.dev_attr.attr,
&iio_dev_attr_in_scale.dev_attr.attr,
&iio_dev_attr_name.dev_attr.attr,
NULL,
};
static const struct attribute_group ad7780_attribute_group = {
.attrs = ad7780_attributes,
};
static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
[ID_AD7780] = {
.bits = 24,
.storagebits = 32,
.res_shift = 8,
},
[ID_AD7781] = {
.bits = 20,
.storagebits = 32,
.res_shift = 12,
},
};
/**
* Interrupt handler
*/
static irqreturn_t ad7780_interrupt(int irq, void *dev_id)
{
struct ad7780_state *st = dev_id;
st->done = true;
wake_up_interruptible(&st->wq_data_avail);
return IRQ_HANDLED;
};
static int __devinit ad7780_probe(struct spi_device *spi)
{
struct ad7780_platform_data *pdata = spi->dev.platform_data;
struct ad7780_state *st;
int ret, voltage_uv = 0;
if (!pdata) {
dev_dbg(&spi->dev, "no platform data?\n");
return -ENODEV;
}
st = kzalloc(sizeof(*st), GFP_KERNEL);
if (st == NULL) {
ret = -ENOMEM;
goto error_ret;
}
st->reg = regulator_get(&spi->dev, "vcc");
if (!IS_ERR(st->reg)) {
ret = regulator_enable(st->reg);
if (ret)
goto error_put_reg;
voltage_uv = regulator_get_voltage(st->reg);
}
st->chip_info =
&ad7780_chip_info_tbl[spi_get_device_id(spi)->driver_data];
st->pdata = pdata;
if (pdata && pdata->vref_mv)
st->int_vref_mv = pdata->vref_mv;
else if (voltage_uv)
st->int_vref_mv = voltage_uv / 1000;
else
dev_warn(&spi->dev, "reference voltage unspecified\n");
spi_set_drvdata(spi, st);
st->spi = spi;
st->indio_dev = iio_allocate_device();
if (st->indio_dev == NULL) {
ret = -ENOMEM;
goto error_disable_reg;
}
/* Establish that the iio_dev is a child of the spi device */
st->indio_dev->dev.parent = &spi->dev;
st->indio_dev->attrs = &ad7780_attribute_group;
st->indio_dev->dev_data = (void *)(st);
st->indio_dev->driver_module = THIS_MODULE;
st->indio_dev->modes = INDIO_DIRECT_MODE;
init_waitqueue_head(&st->wq_data_avail);
/* Setup default message */
st->xfer.rx_buf = &st->data;
st->xfer.len = st->chip_info->storagebits / 8;
spi_message_init(&st->msg);
spi_message_add_tail(&st->xfer, &st->msg);
ret = gpio_request_one(st->pdata->gpio_pdrst, GPIOF_OUT_INIT_LOW,
"AD7877 /PDRST");
if (ret) {
dev_err(&spi->dev, "failed to request GPIO PDRST\n");
goto error_free_device;
}
ret = request_irq(spi->irq, ad7780_interrupt,
IRQF_TRIGGER_FALLING, spi_get_device_id(spi)->name, st);
if (ret)
goto error_free_device;
disable_irq(spi->irq);
ret = iio_device_register(st->indio_dev);
if (ret)
goto error_free_irq;
return 0;
error_free_irq:
free_irq(spi->irq, st);
error_free_device:
iio_free_device(st->indio_dev);
error_disable_reg:
if (!IS_ERR(st->reg))
regulator_disable(st->reg);
error_put_reg:
if (!IS_ERR(st->reg))
regulator_put(st->reg);
kfree(st);
error_ret:
return ret;
}
static int ad7780_remove(struct spi_device *spi)
{
struct ad7780_state *st = spi_get_drvdata(spi);
struct iio_dev *indio_dev = st->indio_dev;
free_irq(spi->irq, st);
gpio_free(st->pdata->gpio_pdrst);
iio_device_unregister(indio_dev);
if (!IS_ERR(st->reg)) {
regulator_disable(st->reg);
regulator_put(st->reg);
}
kfree(st);
return 0;
}
static const struct spi_device_id ad7780_id[] = {
{"ad7780", ID_AD7780},
{"ad7781", ID_AD7781},
{}
};
static struct spi_driver ad7780_driver = {
.driver = {
.name = "ad7780",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = ad7780_probe,
.remove = __devexit_p(ad7780_remove),
.id_table = ad7780_id,
};
static int __init ad7780_init(void)
{
return spi_register_driver(&ad7780_driver);
}
module_init(ad7780_init);
static void __exit ad7780_exit(void)
{
spi_unregister_driver(&ad7780_driver);
}
module_exit(ad7780_exit);
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("Analog Devices AD7780/1 ADC");
MODULE_LICENSE("GPL v2");
/*
* AD7780/AD7781 SPI ADC driver
*
* Copyright 2011 Analog Devices Inc.
*
* Licensed under the GPL-2.
*/
#ifndef IIO_ADC_AD7780_H_
#define IIO_ADC_AD7780_H_
/*
* TODO: struct ad7780_platform_data needs to go into include/linux/iio
*/
/* NOTE:
* The AD7780 doesn't feature a dedicated SPI chip select, in addition it
* features a dual use data out ready DOUT/RDY output.
* In order to avoid contentions on the SPI bus, it's therefore necessary
* to use spi bus locking combined with a dedicated GPIO to control the
* power down reset signal of the AD7780.
*
* The DOUT/RDY output must also be wired to an interrupt capable GPIO.
*/
struct ad7780_platform_data {
u16 vref_mv;
int gpio_pdrst;
};
#endif /* IIO_ADC_AD7780_H_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment