Merge tag 'v4.3-rockchip32-soc1' of...

Merge tag 'v4.3-rockchip32-soc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc

Merge "Rockchip soc changes for 4.3, part1" from Heiko Stuebner:

Some suspend improvements enabling the possibility to wakeup
from usbphy events and a rework of how cpu cores are brought
up and down, as it was possible to produce lockups when
hammering the cpu hotplug functions.

* tag 'v4.3-rockchip32-soc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: rockchip: fix broken build
  ARM: rockchip: remove some useless macro in pm.h
  ARM: rockchip: add support holding 24Mhz osc during suspend
  ARM: rockchip: fix the SMP code style
  ARM: rockchip: ensure CPU to enter WFI/WFE state
  ARM: rockchip: fix the CPU soft reset
  ARM: rockchip: restore dapswjdp after suspend
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-rockchip/platsmp.c

@@ -72,29 +72,22 @@ static struct reset_control *rockchip_get_core_reset(int cpu)
 static int pmu_set_power_domain(int pd, bool on)
 {
 	u32 val = (on) ? 0 : BIT(pd);
+	struct reset_control *rstc = rockchip_get_core_reset(pd);
 	int ret;
 
+	if (IS_ERR(rstc) && read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
+		pr_err("%s: could not get reset control for core %d\n",
+		       __func__, pd);
+		return PTR_ERR(rstc);
+	}
+
 	/*
 	 * We need to soft reset the cpu when we turn off the cpu power domain,
 	 * or else the active processors might be stalled when the individual
 	 * processor is powered down.
 	 */
-	if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
-		struct reset_control *rstc = rockchip_get_core_reset(pd);
-
-		if (IS_ERR(rstc)) {
-			pr_err("%s: could not get reset control for core %d\n",
-			       __func__, pd);
-			return PTR_ERR(rstc);
-		}
-
-		if (on)
-			reset_control_deassert(rstc);
-		else
-			reset_control_assert(rstc);
-
-		reset_control_put(rstc);
-	}
+	if (!IS_ERR(rstc) && !on)
+		reset_control_assert(rstc);
 
 	ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
 	if (ret < 0) {
@@ -107,11 +100,17 @@ static int pmu_set_power_domain(int pd, bool on)
 		ret = pmu_power_domain_is_on(pd);
 		if (ret < 0) {
 			pr_err("%s: could not read power domain state\n",
-				 __func__);
+			       __func__);
 			return ret;
 		}
 	}
 
+	if (!IS_ERR(rstc)) {
+		if (on)
+			reset_control_deassert(rstc);
+		reset_control_put(rstc);
+	}
+
 	return 0;
 }
 
@@ -130,7 +129,7 @@ static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 	if (cpu >= ncores) {
 		pr_err("%s: cpu %d outside maximum number of cpus %d\n",
-							__func__, cpu, ncores);
+		       __func__, cpu, ncores);
 		return -ENXIO;
 	}
 
@@ -140,14 +139,19 @@ static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		return ret;
 
 	if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
-		/* We communicate with the bootrom to active the cpus other
+		/*
+		 * We communicate with the bootrom to active the cpus other
 		 * than cpu0, after a blob of initialize code, they will
 		 * stay at wfe state, once they are actived, they will check
 		 * the mailbox:
 		 * sram_base_addr + 4: 0xdeadbeaf
 		 * sram_base_addr + 8: start address for pc
-		 * */
-		udelay(10);
+		 * The cpu0 need to wait the other cpus other than cpu0 entering
+		 * the wfe state.The wait time is affected by many aspects.
+		 * (e.g: cpu frequency, bootrom frequency, sram frequency, ...)
+		 */
+		mdelay(1); /* ensure the cpus other than cpu0 to startup */
+
 		writel(virt_to_phys(secondary_startup), sram_base_addr + 8);
 		writel(0xDEADBEAF, sram_base_addr + 4);
 		dsb_sev();
@@ -317,6 +321,13 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 #ifdef CONFIG_HOTPLUG_CPU
 static int rockchip_cpu_kill(unsigned int cpu)
 {
+	/*
+	 * We need a delay here to ensure that the dying CPU can finish
+	 * executing v7_coherency_exit() and reach the WFI/WFE state
+	 * prior to having the power domain disabled.
+	 */
+	mdelay(1);
+
 	pmu_set_power_domain(0 + cpu, false);
 	return 1;
 }
@@ -324,7 +335,7 @@ static int rockchip_cpu_kill(unsigned int cpu)
 static void rockchip_cpu_die(unsigned int cpu)
 {
 	v7_exit_coherency_flush(louis);
-	while(1)
+	while (1)
 		cpu_do_idle();
 }
 #endif
@@ -337,4 +348,5 @@ static struct smp_operations rockchip_smp_ops __initdata = {
 	.cpu_die		= rockchip_cpu_die,
 #endif
 };
+
 CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops);

arch/arm/mach-rockchip/pm.c

@@ -45,9 +45,11 @@ static phys_addr_t rk3288_bootram_phy;
 
 static struct regmap *pmu_regmap;
 static struct regmap *sgrf_regmap;
+static struct regmap *grf_regmap;
 
 static u32 rk3288_pmu_pwr_mode_con;
 static u32 rk3288_sgrf_soc_con0;
+static u32 rk3288_sgrf_cpu_con0;
 
 static inline u32 rk3288_l2_config(void)
 {
@@ -66,10 +68,37 @@ static void rk3288_config_bootdata(void)
 	rkpm_bootdata_l2ctlr = rk3288_l2_config();
 }
 
+#define GRF_UOC0_CON0			0x320
+#define GRF_UOC1_CON0			0x334
+#define GRF_UOC2_CON0			0x348
+#define GRF_SIDDQ			BIT(13)
+
+static bool rk3288_slp_disable_osc(void)
+{
+	static const u32 reg_offset[] = { GRF_UOC0_CON0, GRF_UOC1_CON0,
+					  GRF_UOC2_CON0 };
+	u32 reg, i;
+
+	/*
+	 * if any usb phy is still on(GRF_SIDDQ==0), that means we need the
+	 * function of usb wakeup, so do not switch to 32khz, since the usb phy
+	 * clk does not connect to 32khz osc
+	 */
+	for (i = 0; i < ARRAY_SIZE(reg_offset); i++) {
+		regmap_read(grf_regmap, reg_offset[i], &reg);
+		if (!(reg & GRF_SIDDQ))
+			return false;
+	}
+
+	return true;
+}
+
 static void rk3288_slp_mode_set(int level)
 {
 	u32 mode_set, mode_set1;
+	bool osc_switch_to_32k = rk3288_slp_disable_osc();
 
+	regmap_read(sgrf_regmap, RK3288_SGRF_CPU_CON0, &rk3288_sgrf_cpu_con0);
 	regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
 
 	regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
@@ -107,11 +136,13 @@ static void rk3288_slp_mode_set(int level)
 
 	if (level == ROCKCHIP_ARM_OFF_LOGIC_DEEP) {
 		/* arm off, logic deep sleep */
-		mode_set |= BIT(PMU_BUS_PD_EN) |
+		mode_set |= BIT(PMU_BUS_PD_EN) | BIT(PMU_PMU_USE_LF) |
 			    BIT(PMU_DDR1IO_RET_EN) | BIT(PMU_DDR0IO_RET_EN) |
-			    BIT(PMU_OSC_24M_DIS) | BIT(PMU_PMU_USE_LF) |
 			    BIT(PMU_ALIVE_USE_LF) | BIT(PMU_PLL_PD_EN);
 
+		if (osc_switch_to_32k)
+			mode_set |= BIT(PMU_OSC_24M_DIS);
+
 		mode_set1 |= BIT(PMU_CLR_ALIVE) | BIT(PMU_CLR_BUS) |
 			     BIT(PMU_CLR_PERI) | BIT(PMU_CLR_DMA);
 	} else {
@@ -129,6 +160,9 @@ static void rk3288_slp_mode_set(int level)
 
 static void rk3288_slp_mode_set_resume(void)
 {
+	regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0,
+		     rk3288_sgrf_cpu_con0 | SGRF_DAPDEVICEEN_WRITE);
+
 	regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON,
 		     rk3288_pmu_pwr_mode_con);
 
@@ -193,6 +227,13 @@ static int rk3288_suspend_init(struct device_node *np)
 		return PTR_ERR(pmu_regmap);
 	}
 
+	grf_regmap = syscon_regmap_lookup_by_compatible(
+				"rockchip,rk3288-grf");
+	if (IS_ERR(grf_regmap)) {
+		pr_err("%s: could not find grf regmap\n", __func__);
+		return PTR_ERR(pmu_regmap);
+	}
+
 	sram_np = of_find_compatible_node(NULL, NULL,
 					  "rockchip,rk3288-pmu-sram");
 	if (!sram_np) {

arch/arm/mach-rockchip/pm.h

@@ -59,13 +59,6 @@ static inline void rockchip_suspend_init(void)
 #define SGRF_DAPDEVICEEN		BIT(0)
 #define SGRF_DAPDEVICEEN_WRITE		BIT(16)
 
-#define RK3288_CRU_MODE_CON		0x50
-#define RK3288_CRU_SEL0_CON		0x60
-#define RK3288_CRU_SEL1_CON		0x64
-#define RK3288_CRU_SEL10_CON		0x88
-#define RK3288_CRU_SEL33_CON		0xe4
-#define RK3288_CRU_SEL37_CON		0xf4
-
 /* PMU_WAKEUP_CFG1 bits */
 #define PMU_ARMINT_WAKEUP_EN		BIT(0)