Commit d70a2ffe authored by Przemo Firszt's avatar Przemo Firszt Committed by Jiri Kosina

HID: wacom: Unify speed setting

This patch unifies speed setting for both supported tablets. Functionality
of "wacom_poke" (used only by Graphire) is now in "wacom_set_features".
Reporting speed for both tablets can be changed by somethinkg like:

echo 1 > /sys/class/bluetooth/hci0/hci0:1/{device No}/speed

Accepted values:
0 - low speed,
1 - high speed.

The way of changing reporting speed is the same for Graphire and Intuos4 WL.
Signed-off-by: default avatarPrzemo Firszt <przemo@firszt.eu>
Acked-by: default avatarPing Cheng <pingc@wacom.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent be4925b0
......@@ -229,47 +229,14 @@ static int wacom_ac_get_property(struct power_supply *psy,
}
static void wacom_set_features(struct hid_device *hdev, u8 speed)
{
struct wacom_data *wdata = hid_get_drvdata(hdev);
int ret;
__u8 rep_data[2];
if (speed == 1)
wdata->features &= ~0x20;
else
wdata->features |= 0x20;
rep_data[0] = 0x03;
rep_data[1] = wdata->features;
ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
HID_FEATURE_REPORT);
if (ret >= 0)
wdata->high_speed = speed;
return;
}
static void wacom_poke(struct hid_device *hdev, u8 speed)
{
struct wacom_data *wdata = hid_get_drvdata(hdev);
int limit, ret;
char rep_data[2];
rep_data[0] = 0x03 ; rep_data[1] = 0x00;
limit = 3;
do {
ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
HID_FEATURE_REPORT);
} while (ret < 0 && limit-- > 0);
if (ret >= 0) {
if (speed == 0)
rep_data[0] = 0x05;
else
rep_data[0] = 0x06;
__u8 rep_data[2];
rep_data[1] = 0x00;
switch (hdev->product) {
case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH:
rep_data[0] = 0x03 ; rep_data[1] = 0x00;
limit = 3;
do {
ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
......@@ -277,17 +244,47 @@ static void wacom_poke(struct hid_device *hdev, u8 speed)
} while (ret < 0 && limit-- > 0);
if (ret >= 0) {
wdata->high_speed = speed;
return;
if (speed == 0)
rep_data[0] = 0x05;
else
rep_data[0] = 0x06;
rep_data[1] = 0x00;
limit = 3;
do {
ret = hdev->hid_output_raw_report(hdev,
rep_data, 2, HID_FEATURE_REPORT);
} while (ret < 0 && limit-- > 0);
if (ret >= 0) {
wdata->high_speed = speed;
return;
}
}
/*
* Note that if the raw queries fail, it's not a hard failure
* and it is safe to continue
*/
hid_warn(hdev, "failed to poke device, command %d, err %d\n",
rep_data[0], ret);
break;
case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
if (speed == 1)
wdata->features &= ~0x20;
else
wdata->features |= 0x20;
rep_data[0] = 0x03;
rep_data[1] = wdata->features;
ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
HID_FEATURE_REPORT);
if (ret >= 0)
wdata->high_speed = speed;
break;
}
/*
* Note that if the raw queries fail, it's not a hard failure and it
* is safe to continue
*/
hid_warn(hdev, "failed to poke device, command %d, err %d\n",
rep_data[0], ret);
return;
}
......@@ -311,7 +308,7 @@ static ssize_t wacom_store_speed(struct device *dev,
return -EINVAL;
if (new_speed == 0 || new_speed == 1) {
wacom_poke(hdev, new_speed);
wacom_set_features(hdev, new_speed);
return strnlen(buf, PAGE_SIZE);
} else
return -EINVAL;
......@@ -720,22 +717,17 @@ static int wacom_probe(struct hid_device *hdev,
hid_warn(hdev,
"can't create sysfs speed attribute err: %d\n", ret);
switch (hdev->product) {
case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH:
/* Set Wacom mode 2 with high reporting speed */
wacom_poke(hdev, 1);
break;
case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
wdata->features = 0;
wacom_set_features(hdev, 1);
if (hdev->product == USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) {
sprintf(hdev->name, "%s", "Wacom Intuos4 WL");
wdata->features = 0;
wacom_set_features(hdev, 1);
ret = wacom_initialize_leds(hdev);
if (ret) {
hid_warn(hdev,
"can't create led attribute, err: %d\n", ret);
goto destroy_leds;
}
break;
}
wdata->battery.properties = wacom_battery_props;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment