rtlwifi: btcoex: add routine to set default port id

Tell wifi and BT firmware the default port ID to set multiports' state
properly, but only 8822be needs this function currently.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c

@@ -1039,6 +1039,28 @@ static void halbtc_fill_h2c_cmd(void *bt_context, u8 element_id,
 					cmd_len, cmd_buf);
 }
 
+void halbtc_send_wifi_port_id_cmd(void *bt_context)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	u8 cmd_buf[1] = {0};	/* port id [2:0] = 0 */
+
+	rtlpriv->cfg->ops->fill_h2c_cmd(rtlpriv->mac80211.hw, H2C_BT_PORT_ID,
+					1, cmd_buf);
+}
+
+void halbtc_set_default_port_id_cmd(void *bt_context)
+{
+	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
+	struct rtl_priv *rtlpriv = btcoexist->adapter;
+	struct ieee80211_hw *hw = rtlpriv->mac80211.hw;
+
+	if (!rtlpriv->cfg->ops->set_default_port_id_cmd)
+		return;
+
+	rtlpriv->cfg->ops->set_default_port_id_cmd(hw);
+}
+
 static
 void halbtc_set_bt_reg(void *btc_context, u8 reg_type, u32 offset, u32 set_val)
 {

drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h

@@ -691,6 +691,8 @@ void exhalbtc_lps_leave(struct btc_coexist *btcoexist);
 void exhalbtc_low_wifi_traffic_notify(struct btc_coexist *btcoexist);
 void exhalbtc_set_single_ant_path(struct btc_coexist *btcoexist,
 				  u8 single_ant_path);
+void halbtc_send_wifi_port_id_cmd(void *bt_context);
+void halbtc_set_default_port_id_cmd(void *bt_context);
 
 /* The following are used by wifi_only case */
 enum wifionly_chip_interface {

drivers/net/wireless/realtek/rtlwifi/wifi.h

@@ -154,6 +154,10 @@ enum rtl8192c_h2c_cmd {
 	MAX_H2CCMD
 };
 
+enum {
+	H2C_BT_PORT_ID = 0x71,
+};
+
 #define GET_TX_REPORT_SN_V1(c2h)	(c2h[6])
 #define GET_TX_REPORT_ST_V1(c2h)	(c2h[0] & 0xC0)
 #define GET_TX_REPORT_RETRY_V1(c2h)	(c2h[2] & 0x3F)
@@ -2257,6 +2261,7 @@ struct rtl_hal_ops {
 	void (*bt_coex_off_before_lps) (struct ieee80211_hw *hw);
 	void (*fill_h2c_cmd) (struct ieee80211_hw *hw, u8 element_id,
 			      u32 cmd_len, u8 *p_cmdbuffer);
+	void (*set_default_port_id_cmd)(struct ieee80211_hw *hw);
 	bool (*get_btc_status) (void);
 	bool (*is_fw_header)(struct rtlwifi_firmware_header *hdr);
 	u32 (*rx_command_packet)(struct ieee80211_hw *hw,