Skip to content

L
linux
Commit d7301c4a authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge branch 'oxnas=dwmac-removal' 

Neil Armstrong says:

====================
net: ethernet: dwmac: oxnas glue removal

With [1] removing MPCore SMP support, this makes the OX820 barely usable,
associated with a clear lack of maintainance, development and migration to
dt-schema it's clear that Linux support for OX810 and OX820 should be removed.

In addition, the OX810 hasn't been booted for years and isn't even present
in an ARM config file.

For the OX820, lack of USB and SATA support makes the platform not usable
in the current Linux support and relies on off-tree drivers hacked from the
vendor (defunct for years) sources.

The last users are in the OpenWRT distribution, and today's removal means
support will still be in stable 6.1 LTS kernel until end of 2026.

If someone wants to take over the development even with lack of SMP, I'll
be happy to hand off maintainance.

It has been a fun time adding support for this architecture, but it's time
to get over!

This patchset only removes net changes, and is derived from:
https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-0-fb6ab3dea87c@linaro.org

---
Changes in v3:
- Removed applied changes
- Added Andy's tags
- Reduced for net
- Link to v2: https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-0-fb6ab3dea87c@linaro.org

Changes in v2:
- s/maintainance/maintenance/
- added acked/review tags
- dropped already applied patches
- drop RFC
- Link to v1: https://lore.kernel.org/r/20230331-topic-oxnas-upstream-remove-v1-0-5bd58fd1dd1f@linaro.org
====================
Signed-off-by: default avatarNeil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 0a368a5c 6d7d66ac
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 297 deletions
Documentation/devicetree/bindings/net/oxnas-dwmac.txt deleted 100644 → 0
View file @ 0a368a5c
* Oxford Semiconductor OXNAS DWMAC Ethernet controller
The device inherits all the properties of the dwmac/stmmac devices
described in the file stmmac.txt in the current directory with the
following changes.
Required properties on all platforms:
- compatible: For the OX820 SoC, it should be :
- "oxsemi,ox820-dwmac" to select glue
- "snps,dwmac-3.512" to select IP version.
For the OX810SE SoC, it should be :
- "oxsemi,ox810se-dwmac" to select glue
- "snps,dwmac-3.512" to select IP version.
- clocks: Should contain phandles to the following clocks
- clock-names: Should contain the following:
- "stmmaceth" for the host clock - see stmmac.txt
- "gmac" for the peripheral gate clock
- oxsemi,sys-ctrl: a phandle to the system controller syscon node
Example :
etha: ethernet@40400000 {
compatible = "oxsemi,ox820-dwmac", "snps,dwmac-3.512";
reg = <0x40400000 0x2000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_wake_irq";
mac-address = [000000000000]; /* Filled in by U-Boot */
phy-mode = "rgmii";
clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
clock-names = "gmac", "stmmaceth";
resets = <&reset RESET_MAC>;
/* Regmap for sys registers */
oxsemi,sys-ctrl = <&sys>;
};
drivers/net/ethernet/stmicro/stmmac/Kconfig
View file @ d7301c4a
......@@ -121,17 +121,6 @@ config DWMAC_MESON
the stmmac device driver. This driver is used for Meson6,
Meson8, Meson8b and GXBB SoCs.
config DWMAC_OXNAS
tristate "Oxford Semiconductor OXNAS dwmac support"
default ARCH_OXNAS
depends on OF && COMMON_CLK && (ARCH_OXNAS || COMPILE_TEST)
select MFD_SYSCON
help
Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs.
This selects the Oxford Semiconductor OXNASSoC glue layer support for
the stmmac device driver. This driver is used for OX820.
config DWMAC_QCOM_ETHQOS
tristate "Qualcomm ETHQOS support"
default ARCH_QCOM
......
drivers/net/ethernet/stmicro/stmmac/Makefile
View file @ d7301c4a
......@@ -19,7 +19,6 @@ obj-$(CONFIG_DWMAC_IPQ806X) += dwmac-ipq806x.o
obj-$(CONFIG_DWMAC_LPC18XX) += dwmac-lpc18xx.o
obj-$(CONFIG_DWMAC_MEDIATEK) += dwmac-mediatek.o
obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o dwmac-meson8b.o
obj-$(CONFIG_DWMAC_OXNAS) += dwmac-oxnas.o
obj-$(CONFIG_DWMAC_QCOM_ETHQOS) += dwmac-qcom-ethqos.o
obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o
obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o
......
drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c deleted 100644 → 0
View file @ 0a368a5c
// SPDX-License-Identifier: GPL-2.0-only
/*
* Oxford Semiconductor OXNAS DWMAC glue layer
*
* Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
* Copyright (C) 2014 Daniel Golle <daniel@makrotopia.org>
* Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
* Copyright (C) 2012 John Crispin <blogic@openwrt.org>
*/
#include <linux/device.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/stmmac.h>
#include "stmmac_platform.h"
/* System Control regmap offsets */
#define OXNAS_DWMAC_CTRL_REGOFFSET 0x78
#define OXNAS_DWMAC_DELAY_REGOFFSET 0x100
/* Control Register */
#define DWMAC_CKEN_RX_IN 14
#define DWMAC_CKEN_RXN_OUT 13
#define DWMAC_CKEN_RX_OUT 12
#define DWMAC_CKEN_TX_IN 10
#define DWMAC_CKEN_TXN_OUT 9
#define DWMAC_CKEN_TX_OUT 8
#define DWMAC_RX_SOURCE 7
#define DWMAC_TX_SOURCE 6
#define DWMAC_LOW_TX_SOURCE 4
#define DWMAC_AUTO_TX_SOURCE 3
#define DWMAC_RGMII 2
#define DWMAC_SIMPLE_MUX 1
#define DWMAC_CKEN_GTX 0
/* Delay register */
#define DWMAC_TX_VARDELAY_SHIFT 0
#define DWMAC_TXN_VARDELAY_SHIFT 8
#define DWMAC_RX_VARDELAY_SHIFT 16
#define DWMAC_RXN_VARDELAY_SHIFT 24
#define DWMAC_TX_VARDELAY(d) ((d) << DWMAC_TX_VARDELAY_SHIFT)
#define DWMAC_TXN_VARDELAY(d) ((d) << DWMAC_TXN_VARDELAY_SHIFT)
#define DWMAC_RX_VARDELAY(d) ((d) << DWMAC_RX_VARDELAY_SHIFT)
#define DWMAC_RXN_VARDELAY(d) ((d) << DWMAC_RXN_VARDELAY_SHIFT)
struct oxnas_dwmac;
struct oxnas_dwmac_data {
int (*setup)(struct oxnas_dwmac *dwmac);
};
struct oxnas_dwmac {
struct device *dev;
struct clk *clk;
struct regmap *regmap;
const struct oxnas_dwmac_data *data;
};
static int oxnas_dwmac_setup_ox810se(struct oxnas_dwmac *dwmac)
{
unsigned int value;
int ret;
ret = regmap_read(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, &value);
if (ret < 0)
return ret;
/* Enable GMII_GTXCLK to follow GMII_REFCLK, required for gigabit PHY */
value |= BIT(DWMAC_CKEN_GTX) |
/* Use simple mux for 25/125 Mhz clock switching */
BIT(DWMAC_SIMPLE_MUX);
regmap_write(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, value);
return 0;
}
static int oxnas_dwmac_setup_ox820(struct oxnas_dwmac *dwmac)
{
unsigned int value;
int ret;
ret = regmap_read(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, &value);
if (ret < 0)
return ret;
/* Enable GMII_GTXCLK to follow GMII_REFCLK, required for gigabit PHY */
value |= BIT(DWMAC_CKEN_GTX) |
/* Use simple mux for 25/125 Mhz clock switching */
BIT(DWMAC_SIMPLE_MUX) |
/* set auto switch tx clock source */
BIT(DWMAC_AUTO_TX_SOURCE) |
/* enable tx & rx vardelay */
BIT(DWMAC_CKEN_TX_OUT) |
BIT(DWMAC_CKEN_TXN_OUT) |
BIT(DWMAC_CKEN_TX_IN) |
BIT(DWMAC_CKEN_RX_OUT) |
BIT(DWMAC_CKEN_RXN_OUT) |
BIT(DWMAC_CKEN_RX_IN);
regmap_write(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, value);
/* set tx & rx vardelay */
value = DWMAC_TX_VARDELAY(4) |
DWMAC_TXN_VARDELAY(2) |
DWMAC_RX_VARDELAY(10) |
DWMAC_RXN_VARDELAY(8);
regmap_write(dwmac->regmap, OXNAS_DWMAC_DELAY_REGOFFSET, value);
return 0;
}
static int oxnas_dwmac_init(struct platform_device *pdev, void *priv)
{
struct oxnas_dwmac *dwmac = priv;
int ret;
/* Reset HW here before changing the glue configuration */
ret = device_reset(dwmac->dev);
if (ret)
return ret;
ret = clk_prepare_enable(dwmac->clk);
if (ret)
return ret;
ret = dwmac->data->setup(dwmac);
if (ret)
clk_disable_unprepare(dwmac->clk);
return ret;
}
static void oxnas_dwmac_exit(struct platform_device *pdev, void *priv)
{
struct oxnas_dwmac *dwmac = priv;
clk_disable_unprepare(dwmac->clk);
}
static int oxnas_dwmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
struct oxnas_dwmac *dwmac;
int ret;
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
return ret;
plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
if (IS_ERR(plat_dat))
return PTR_ERR(plat_dat);
dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
if (!dwmac) {
ret = -ENOMEM;
goto err_remove_config_dt;
}
dwmac->data = (const struct oxnas_dwmac_data *)of_device_get_match_data(&pdev->dev);
if (!dwmac->data) {
ret = -EINVAL;
goto err_remove_config_dt;
}
dwmac->dev = &pdev->dev;
plat_dat->bsp_priv = dwmac;
plat_dat->init = oxnas_dwmac_init;
plat_dat->exit = oxnas_dwmac_exit;
dwmac->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
"oxsemi,sys-ctrl");
if (IS_ERR(dwmac->regmap)) {
dev_err(&pdev->dev, "failed to have sysctrl regmap\n");
ret = PTR_ERR(dwmac->regmap);
goto err_remove_config_dt;
}
dwmac->clk = devm_clk_get(&pdev->dev, "gmac");
if (IS_ERR(dwmac->clk)) {
ret = PTR_ERR(dwmac->clk);
goto err_remove_config_dt;
}
ret = oxnas_dwmac_init(pdev, plat_dat->bsp_priv);
if (ret)
goto err_remove_config_dt;
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
if (ret)
goto err_dwmac_exit;
return 0;
err_dwmac_exit:
oxnas_dwmac_exit(pdev, plat_dat->bsp_priv);
err_remove_config_dt:
stmmac_remove_config_dt(pdev, plat_dat);
return ret;
}
static const struct oxnas_dwmac_data ox810se_dwmac_data = {
.setup = oxnas_dwmac_setup_ox810se,
};
static const struct oxnas_dwmac_data ox820_dwmac_data = {
.setup = oxnas_dwmac_setup_ox820,
};
static const struct of_device_id oxnas_dwmac_match[] = {
{
.compatible = "oxsemi,ox810se-dwmac",
.data = &ox810se_dwmac_data,
},
{
.compatible = "oxsemi,ox820-dwmac",
.data = &ox820_dwmac_data,
},
{ }
};
MODULE_DEVICE_TABLE(of, oxnas_dwmac_match);
static struct platform_driver oxnas_dwmac_driver = {
.probe = oxnas_dwmac_probe,
.remove_new = stmmac_pltfr_remove,
.driver = {
.name = "oxnas-dwmac",
.pm = &stmmac_pltfr_pm_ops,
.of_match_table = oxnas_dwmac_match,
},
};
module_platform_driver(oxnas_dwmac_driver);
MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
MODULE_DESCRIPTION("Oxford Semiconductor OXNAS DWMAC glue layer");
MODULE_LICENSE("GPL v2");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7