[ARM] 4383/1: iop: fix usage of '__init' and 'inline' in iop files

WARNING: arch/arm/mach-iop13xx/built-in.o - Section mismatch: reference to
.init.text:iop13xx_pcie_map_irq from .text between 'iop13xx_pci_setup' (at
offset 0x7fc) and 'iop13xx_map_pci_memory'

While fixing this warning I also recalled Adrian Bunk's recommendation to
not use inline in .c files, as 'iop13xx_map_pci_memory' is needlessly
inlined.

Removing 'inline' uncovered some dead code so that is cleaned up as well.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-iop13xx/irq.c

@@ -30,77 +30,65 @@
 
 /* INTCTL0 CP6 R0 Page 4
  */
-static inline u32 read_intctl_0(void)
+static u32 read_intctl_0(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c0, c4, 0":"=r" (val));
 	return val;
 }
-static inline void write_intctl_0(u32 val)
+static void write_intctl_0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c4, 0"::"r" (val));
 }
 
 /* INTCTL1 CP6 R1 Page 4
  */
-static inline u32 read_intctl_1(void)
+static u32 read_intctl_1(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c1, c4, 0":"=r" (val));
 	return val;
 }
-static inline void write_intctl_1(u32 val)
+static void write_intctl_1(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c1, c4, 0"::"r" (val));
 }
 
 /* INTCTL2 CP6 R2 Page 4
  */
-static inline u32 read_intctl_2(void)
+static u32 read_intctl_2(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c2, c4, 0":"=r" (val));
 	return val;
 }
-static inline void write_intctl_2(u32 val)
+static void write_intctl_2(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c2, c4, 0"::"r" (val));
 }
 
 /* INTCTL3 CP6 R3 Page 4
  */
-static inline u32 read_intctl_3(void)
+static u32 read_intctl_3(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c3, c4, 0":"=r" (val));
 	return val;
 }
-static inline void write_intctl_3(u32 val)
+static void write_intctl_3(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c3, c4, 0"::"r" (val));
 }
 
 /* INTSTR0 CP6 R0 Page 5
  */
-static inline u32 read_intstr_0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c5, 0":"=r" (val));
-	return val;
-}
-static inline void write_intstr_0(u32 val)
+static void write_intstr_0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c5, 0"::"r" (val));
 }
 
 /* INTSTR1 CP6 R1 Page 5
  */
-static inline u32 read_intstr_1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c1, c5, 0":"=r" (val));
-	return val;
-}
 static void write_intstr_1(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c1, c5, 0"::"r" (val));
@@ -108,12 +96,6 @@ static void write_intstr_1(u32 val)
 
 /* INTSTR2 CP6 R2 Page 5
  */
-static inline u32 read_intstr_2(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c5, 0":"=r" (val));
-	return val;
-}
 static void write_intstr_2(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c2, c5, 0"::"r" (val));
@@ -121,12 +103,6 @@ static void write_intstr_2(u32 val)
 
 /* INTSTR3 CP6 R3 Page 5
  */
-static inline u32 read_intstr_3(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c5, 0":"=r" (val));
-	return val;
-}
 static void write_intstr_3(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c3, c5, 0"::"r" (val));
@@ -134,12 +110,6 @@ static void write_intstr_3(u32 val)
 
 /* INTBASE CP6 R0 Page 2
  */
-static inline u32 read_intbase(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c2, 0":"=r" (val));
-	return val;
-}
 static void write_intbase(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c2, 0"::"r" (val));
@@ -147,12 +117,6 @@ static void write_intbase(u32 val)
 
 /* INTSIZE CP6 R2 Page 2
  */
-static inline u32 read_intsize(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c2, 0":"=r" (val));
-	return val;
-}
 static void write_intsize(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c2, c2, 0"::"r" (val));

arch/arm/mach-iop13xx/msi.c

@@ -30,52 +30,52 @@ static DECLARE_BITMAP(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
 
 /* IMIPR0 CP6 R8 Page 1
  */
-static inline u32 read_imipr_0(void)
+static u32 read_imipr_0(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c8, c1, 0":"=r" (val));
 	return val;
 }
-static inline void write_imipr_0(u32 val)
+static void write_imipr_0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c8, c1, 0"::"r" (val));
 }
 
 /* IMIPR1 CP6 R9 Page 1
  */
-static inline u32 read_imipr_1(void)
+static u32 read_imipr_1(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c9, c1, 0":"=r" (val));
 	return val;
 }
-static inline void write_imipr_1(u32 val)
+static void write_imipr_1(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c9, c1, 0"::"r" (val));
 }
 
 /* IMIPR2 CP6 R10 Page 1
  */
-static inline u32 read_imipr_2(void)
+static u32 read_imipr_2(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c10, c1, 0":"=r" (val));
 	return val;
 }
-static inline void write_imipr_2(u32 val)
+static void write_imipr_2(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c10, c1, 0"::"r" (val));
 }
 
 /* IMIPR3 CP6 R11 Page 1
  */
-static inline u32 read_imipr_3(void)
+static u32 read_imipr_3(void)
 {
 	u32 val;
 	asm volatile("mrc p6, 0, %0, c11, c1, 0":"=r" (val));
 	return val;
 }
-static inline void write_imipr_3(u32 val)
+static void write_imipr_3(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c11, c1, 0"::"r" (val));
 }

arch/arm/mach-iop13xx/pci.c

@@ -144,7 +144,7 @@ void iop13xx_map_pci_memory(void)
 	}
 }
 
-static inline int iop13xx_atu_function(int atu)
+static int iop13xx_atu_function(int atu)
 {
 	int func = 0;
 	/* the function number depends on the value of the
@@ -259,7 +259,7 @@ static int iop13xx_atux_pci_status(int clear)
  * data.  Note that the data dependency on %0 encourages an abort
  * to be detected before we return.
  */
-static inline u32 iop13xx_atux_read(unsigned long addr)
+static u32 iop13xx_atux_read(unsigned long addr)
 {
 	u32 val;
 
@@ -387,7 +387,7 @@ static int iop13xx_atue_pci_status(int clear)
 	return err;
 }
 
-static inline int __init
+static int
 iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 {
 	WARN_ON(idsel != 0);
@@ -401,7 +401,7 @@ iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 	}
 }
 
-static inline u32 iop13xx_atue_read(unsigned long addr)
+static u32 iop13xx_atue_read(unsigned long addr)
 {
 	u32 val;
 

arch/arm/mach-iop32x/glantank.c

@@ -75,7 +75,7 @@ void __init glantank_map_io(void)
 #define INTC	IRQ_IOP32X_XINT2
 #define INTD	IRQ_IOP32X_XINT3
 
-static inline int __init
+static int __init
 glantank_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	static int pci_irq_table[][4] = {

arch/arm/mach-iop32x/iq31244.c

@@ -104,7 +104,7 @@ void __init iq31244_map_io(void)
 /*
  * EP80219/IQ31244 PCI.
  */
-static inline int __init
+static int __init
 ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
@@ -140,7 +140,7 @@ static struct hw_pci ep80219_pci __initdata = {
 	.map_irq	= ep80219_pci_map_irq,
 };
 
-static inline int __init
+static int __init
 iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;

arch/arm/mach-iop32x/iq80321.c

@@ -72,7 +72,7 @@ void __init iq80321_map_io(void)
 /*
  * IQ80321 PCI.
  */
-static inline int __init
+static int __init
 iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;

arch/arm/mach-iop32x/irq.c

@@ -21,12 +21,12 @@
 
 static u32 iop32x_mask;
 
-static inline void intctl_write(u32 val)
+static void intctl_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
 }
 
-static inline void intstr_write(u32 val)
+static void intstr_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
 }

arch/arm/mach-iop32x/n2100.c

@@ -76,7 +76,7 @@ void __init n2100_map_io(void)
 /*
  * N2100 PCI.
  */
-static inline int __init
+static int __init
 n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;

arch/arm/mach-iop33x/iq80331.c

@@ -55,7 +55,7 @@ static struct sys_timer iq80331_timer = {
 /*
  * IQ80331 PCI.
  */
-static inline int __init
+static int __init
 iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;

arch/arm/mach-iop33x/iq80332.c

@@ -55,7 +55,7 @@ static struct sys_timer iq80332_timer = {
 /*
  * IQ80332 PCI.
  */
-static inline int __init
+static int __init
 iq80332_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;

arch/arm/mach-iop33x/irq.c

@@ -22,32 +22,32 @@
 static u32 iop33x_mask0;
 static u32 iop33x_mask1;
 
-static inline void intctl0_write(u32 val)
+static void intctl0_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
 }
 
-static inline void intctl1_write(u32 val)
+static void intctl1_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val));
 }
 
-static inline void intstr0_write(u32 val)
+static void intstr0_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val));
 }
 
-static inline void intstr1_write(u32 val)
+static void intstr1_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val));
 }
 
-static inline void intbase_write(u32 val)
+static void intbase_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c12, c0, 0" : : "r" (val));
 }
 
-static inline void intsize_write(u32 val)
+static void intsize_write(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c13, c0, 0" : : "r" (val));
 }

arch/arm/plat-iop/pci.c

@@ -88,7 +88,7 @@ static int iop3xx_pci_status(void)
  * data.  Note that the 4 nop's ensure that we are able to handle
  * a delayed abort (in theory.)
  */
-static inline u32 iop3xx_read(unsigned long addr)
+static u32 iop3xx_read(unsigned long addr)
 {
 	u32 val;
 
@@ -321,7 +321,7 @@ void __init iop3xx_atu_disable(void)
 /* Flag to determine whether the ATU is initialized and the PCI bus scanned */
 int init_atu;
 
-void iop3xx_pci_preinit(void)
+void __init iop3xx_pci_preinit(void)
 {
 	if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
 		iop3xx_atu_disable();