arm64: dts: librem5-devkit: Move headphone detection to sound card

This allows for automatic output source switching in userspace. Enable
the pullup on the GPIO to actually make it trigger and mark it as
active-high since detection is reversed otherwise.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts

@@ -50,13 +50,6 @@ btn2 {
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		hp-det {
-			label = "HP_DET";
-			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_HP>;
-		};
-
 		wwan-wake {
 			label = "WWAN_WAKE";
 			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
@@ -173,22 +166,25 @@ mic_mux: mic-mux {
 
 	sound {
 		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hpdet>;
 		simple-audio-card,aux-devs = <&speaker_amp>, <&mic_mux>;
 		simple-audio-card,name = "Librem 5 Devkit";
 		simple-audio-card,format = "i2s";
 		simple-audio-card,widgets =
 			"Microphone", "Builtin Microphone",
 			"Microphone", "Headset Microphone",
-			"Headphone", "Headphone Jack",
+			"Headphone", "Headphones",
 			"Speaker", "Builtin Speaker";
 		simple-audio-card,routing =
 			"MIC_IN", "Mic Mux OUT",
 			"Mic Mux IN1", "Headset Microphone",
 			"Mic Mux IN2", "Builtin Microphone",
 			"Mic Mux OUT", "Mic Bias",
-			"Headphone Jack", "HP_OUT",
+			"Headphones", "HP_OUT",
 			"Builtin Speaker", "Speaker Amp OUTR",
 			"Speaker Amp INR", "LINE_OUT";
+		simple-audio-card,hp-det-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai2>;
@@ -629,7 +625,6 @@ pinctrl_gpio_keys: gpiokeygrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x16
 			MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22	0x16
-			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20	0x180  /* HP_DET */
 			MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8	0x80   /* nWoWWAN */
 		>;
 	};
@@ -640,6 +635,12 @@ MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4		0xc6   /* nHAPTIC */
 		>;
 	};
 
+	pinctrl_hpdet: hpdetgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20	0xC0   /* HP_DET */
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL		0x4000001f