Commit d79acb59 authored by zain wang's avatar zain wang Committed by Andrzej Hajda

drm/bridge: analogix_dp: Set PD_INC_BG first when powering up edp phy

Following the correct power up sequence:
dp_pd=ff => dp_pd=7f => wait 10us => dp_pd=00

Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: default avatarzain wang <wzz@rock-chips.com>
Signed-off-by: default avatarSean Paul <seanpaul@chromium.org>
Signed-off-by: default avatarThierry Escande <thierry.escande@collabora.com>
Signed-off-by: default avatarEnric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: default avatarArchit Taneja <architt@codeaurora.org>
Signed-off-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-7-enric.balletbo@collabora.com
parent 7f641414
......@@ -321,10 +321,16 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
break;
case POWER_ALL:
if (enable) {
reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
CH1_PD | CH0_PD;
reg = DP_ALL_PD;
writel(reg, dp->reg_base + phy_pd_addr);
} else {
reg = DP_ALL_PD;
writel(reg, dp->reg_base + phy_pd_addr);
usleep_range(10, 15);
reg &= ~DP_INC_BG;
writel(reg, dp->reg_base + phy_pd_addr);
usleep_range(10, 15);
writel(0x00, dp->reg_base + phy_pd_addr);
}
break;
......
......@@ -342,12 +342,15 @@
#define DP_PLL_REF_BIT_1_2500V (0x7 << 0)
/* ANALOGIX_DP_PHY_PD */
#define DP_INC_BG (0x1 << 7)
#define DP_EXP_BG (0x1 << 6)
#define DP_PHY_PD (0x1 << 5)
#define AUX_PD (0x1 << 4)
#define CH3_PD (0x1 << 3)
#define CH2_PD (0x1 << 2)
#define CH1_PD (0x1 << 1)
#define CH0_PD (0x1 << 0)
#define DP_ALL_PD (0xff)
/* ANALOGIX_DP_PHY_TEST */
#define MACRO_RST (0x1 << 5)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment