amd-xgbe: Enable IRQs only if napi_complete_done() is true

Depending on the hardware, the amd-xgbe driver may use disable_irq_nosync()
and enable_irq() when an interrupt is received to process Rx packets. If
the napi_complete_done() return value isn't checked an unbalanced enable
for the IRQ could result, generating a warning stack trace.

Update the driver to only enable interrupts if napi_complete_done() returns
true.
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/amd/xgbe/xgbe-drv.c

@@ -2272,10 +2272,7 @@ static int xgbe_one_poll(struct napi_struct *napi, int budget)
 	processed = xgbe_rx_poll(channel, budget);
 
 	/* If we processed everything, we are done */
-	if (processed < budget) {
-		/* Turn off polling */
-		napi_complete_done(napi, processed);
-
+	if ((processed < budget) && napi_complete_done(napi, processed)) {
 		/* Enable Tx and Rx interrupts */
 		if (pdata->channel_irq_mode)
 			xgbe_enable_rx_tx_int(pdata, channel);
@@ -2317,10 +2314,7 @@ static int xgbe_all_poll(struct napi_struct *napi, int budget)
 	} while ((processed < budget) && (processed != last_processed));
 
 	/* If we processed everything, we are done */
-	if (processed < budget) {
-		/* Turn off polling */
-		napi_complete_done(napi, processed);
-
+	if ((processed < budget) && napi_complete_done(napi, processed)) {
 		/* Enable Tx and Rx interrupts */
 		xgbe_enable_rx_tx_ints(pdata);
 	}