Skip to content

L
linux
Commit d7b9beb8 authored by Kunihiko Hayashi's avatar Kunihiko Hayashi Committed by Masahiro Yamada
Browse files
Options

arm64: dts: uniphier: Add USB3 controller nodes 

Add USB3 controller nodes including usb-core, resets, regulator, ss-phy
and hs-phy. This supports for LD20, PXs3 and the boards. This includes
additional efuse nodes for obtaining PHY trimming values.
Signed-off-by: default avatarKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
parent 8bb2f532
Hide whitespace changes
Inline Side-by-side
Showing with 450 additions and 0 deletions
arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
View file @ d7b9beb8
......@@ -148,3 +148,7 @@ ethphy: ethphy@1 {
&nand {
status = "okay";
};
&usb {
status = "okay";
};
arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
View file @ d7b9beb8
......@@ -75,3 +75,7 @@ tx {
drive-strength = <9>;
};
};
&usb {
status = "okay";
};
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
View file @ d7b9beb8
......@@ -611,6 +611,50 @@ efuse@100 {
efuse@200 {
compatible = "socionext,uniphier-efuse";
reg = <0x200 0x68>;
#address-cells = <1>;
#size-cells = <1>;
/* USB cells */
usb_rterm0: trim@54,4 {
reg = <0x54 1>;
bits = <4 2>;
};
usb_rterm1: trim@55,4 {
reg = <0x55 1>;
bits = <4 2>;
};
usb_rterm2: trim@58,4 {
reg = <0x58 1>;
bits = <4 2>;
};
usb_rterm3: trim@59,4 {
reg = <0x59 1>;
bits = <4 2>;
};
usb_sel_t0: trim@54,0 {
reg = <0x54 1>;
bits = <0 4>;
};
usb_sel_t1: trim@55,0 {
reg = <0x55 1>;
bits = <0 4>;
};
usb_sel_t2: trim@58,0 {
reg = <0x58 1>;
bits = <0 4>;
};
usb_sel_t3: trim@59,0 {
reg = <0x59 1>;
bits = <0 4>;
};
usb_hs_i0: trim@56,0 {
reg = <0x56 1>;
bits = <0 4>;
};
usb_hs_i2: trim@5a,0 {
reg = <0x5a 1>;
bits = <0 4>;
};
};
};
......@@ -678,6 +722,156 @@ mdio: mdio {
};
};
usb: usb@65a00000 {
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
status = "disabled";
reg = <0x65a00000 0xcd00>;
interrupt-names = "host";
interrupts = <0 134 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
<&pinctrl_usb2>, <&pinctrl_usb3>;
clock-names = "ref", "bus_early", "suspend";
clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
resets = <&usb_rst 15>;
phys = <&usb_hsphy0>, <&usb_hsphy1>,
<&usb_hsphy2>, <&usb_hsphy3>,
<&usb_ssphy0>, <&usb_ssphy1>;
dr_mode = "host";
};
usb-glue@65b00000 {
compatible = "socionext,uniphier-ld20-dwc3-glue",
"simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x65b00000 0x400>;
usb_rst: reset@0 {
compatible = "socionext,uniphier-ld20-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
clock-names = "link";
clocks = <&sys_clk 14>;
reset-names = "link";
resets = <&sys_rst 14>;
};
usb_vbus0: regulator@100 {
compatible = "socionext,uniphier-ld20-usb3-regulator";
reg = <0x100 0x10>;
clock-names = "link";
clocks = <&sys_clk 14>;
reset-names = "link";
resets = <&sys_rst 14>;
};
usb_vbus1: regulator@110 {
compatible = "socionext,uniphier-ld20-usb3-regulator";
reg = <0x110 0x10>;
clock-names = "link";
clocks = <&sys_clk 14>;
reset-names = "link";
resets = <&sys_rst 14>;
};
usb_vbus2: regulator@120 {
compatible = "socionext,uniphier-ld20-usb3-regulator";
reg = <0x120 0x10>;
clock-names = "link";
clocks = <&sys_clk 14>;
reset-names = "link";
resets = <&sys_rst 14>;
};
usb_vbus3: regulator@130 {
compatible = "socionext,uniphier-ld20-usb3-regulator";
reg = <0x130 0x10>;
clock-names = "link";
clocks = <&sys_clk 14>;
reset-names = "link";
resets = <&sys_rst 14>;
};
usb_hsphy0: hs-phy@200 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 14>, <&sys_clk 16>;
reset-names = "link", "phy";
resets = <&sys_rst 14>, <&sys_rst 16>;
vbus-supply = <&usb_vbus0>;
nvmem-cell-names = "rterm", "sel_t", "hs_i";
nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
<&usb_hs_i0>;
};
usb_hsphy1: hs-phy@210 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x210 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 14>, <&sys_clk 16>;
reset-names = "link", "phy";
resets = <&sys_rst 14>, <&sys_rst 16>;
vbus-supply = <&usb_vbus1>;
nvmem-cell-names = "rterm", "sel_t", "hs_i";
nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
<&usb_hs_i0>;
};
usb_hsphy2: hs-phy@220 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x220 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 14>, <&sys_clk 17>;
reset-names = "link", "phy";
resets = <&sys_rst 14>, <&sys_rst 17>;
vbus-supply = <&usb_vbus2>;
nvmem-cell-names = "rterm", "sel_t", "hs_i";
nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
<&usb_hs_i2>;
};
usb_hsphy3: hs-phy@230 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x230 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 14>, <&sys_clk 17>;
reset-names = "link", "phy";
resets = <&sys_rst 14>, <&sys_rst 17>;
vbus-supply = <&usb_vbus3>;
nvmem-cell-names = "rterm", "sel_t", "hs_i";
nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
<&usb_hs_i2>;
};
usb_ssphy0: ss-phy@300 {
compatible = "socionext,uniphier-ld20-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 14>, <&sys_clk 18>;
reset-names = "link", "phy";
resets = <&sys_rst 14>, <&sys_rst 18>;
vbus-supply = <&usb_vbus0>;
};
usb_ssphy1: ss-phy@310 {
compatible = "socionext,uniphier-ld20-usb3-ssphy";
reg = <0x310 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 14>, <&sys_clk 19>;
reset-names = "link", "phy";
resets = <&sys_rst 14>, <&sys_rst 19>;
vbus-supply = <&usb_vbus1>;
};
};
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
......
arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
View file @ d7b9beb8
......@@ -104,3 +104,11 @@ ethphy1: ethphy@0 {
&nand {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
View file @ d7b9beb8
......@@ -406,6 +406,50 @@ efuse@100 {
efuse@200 {
compatible = "socionext,uniphier-efuse";
reg = <0x200 0x68>;
#address-cells = <1>;
#size-cells = <1>;
/* USB cells */
usb_rterm0: trim@54,4 {
reg = <0x54 1>;
bits = <4 2>;
};
usb_rterm1: trim@55,4 {
reg = <0x55 1>;
bits = <4 2>;
};
usb_rterm2: trim@58,4 {
reg = <0x58 1>;
bits = <4 2>;
};
usb_rterm3: trim@59,4 {
reg = <0x59 1>;
bits = <4 2>;
};
usb_sel_t0: trim@54,0 {
reg = <0x54 1>;
bits = <0 4>;
};
usb_sel_t1: trim@55,0 {
reg = <0x55 1>;
bits = <0 4>;
};
usb_sel_t2: trim@58,0 {
reg = <0x58 1>;
bits = <0 4>;
};
usb_sel_t3: trim@59,0 {
reg = <0x59 1>;
bits = <0 4>;
};
usb_hs_i0: trim@56,0 {
reg = <0x56 1>;
bits = <0 4>;
};
usb_hs_i2: trim@5a,0 {
reg = <0x5a 1>;
bits = <0 4>;
};
};
};
......@@ -487,6 +531,202 @@ mdio1: mdio {
};
};
usb0: usb@65a00000 {
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
status = "disabled";
reg = <0x65a00000 0xcd00>;
interrupt-names = "host", "peripheral";
interrupts = <0 134 4>, <0 135 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
clock-names = "ref", "bus_early", "suspend";
clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
resets = <&usb0_rst 15>;
phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
<&usb0_ssphy0>, <&usb0_ssphy1>;
dr_mode = "host";
};
usb-glue@65b00000 {
compatible = "socionext,uniphier-pxs3-dwc3-glue",
"simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x65b00000 0x400>;
usb0_rst: reset@0 {
compatible = "socionext,uniphier-pxs3-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
clock-names = "link";
clocks = <&sys_clk 12>;
reset-names = "link";
resets = <&sys_rst 12>;
};
usb0_vbus0: regulator@100 {
compatible = "socionext,uniphier-pxs3-usb3-regulator";
reg = <0x100 0x10>;
clock-names = "link";
clocks = <&sys_clk 12>;
reset-names = "link";
resets = <&sys_rst 12>;
};
usb0_vbus1: regulator@110 {
compatible = "socionext,uniphier-pxs3-usb3-regulator";
reg = <0x110 0x10>;
clock-names = "link";
clocks = <&sys_clk 12>;
reset-names = "link";
resets = <&sys_rst 12>;
};
usb0_hsphy0: hs-phy@200 {
compatible = "socionext,uniphier-pxs3-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 12>, <&sys_clk 16>;
reset-names = "link", "phy";
resets = <&sys_rst 12>, <&sys_rst 16>;
vbus-supply = <&usb0_vbus0>;
nvmem-cell-names = "rterm", "sel_t", "hs_i";
nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
<&usb_hs_i0>;
};
usb0_hsphy1: hs-phy@210 {
compatible = "socionext,uniphier-pxs3-usb3-hsphy";
reg = <0x210 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 12>, <&sys_clk 16>;
reset-names = "link", "phy";
resets = <&sys_rst 12>, <&sys_rst 16>;
vbus-supply = <&usb0_vbus1>;
nvmem-cell-names = "rterm", "sel_t", "hs_i";
nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
<&usb_hs_i0>;
};
usb0_ssphy0: ss-phy@300 {
compatible = "socionext,uniphier-pxs3-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 12>, <&sys_clk 17>;
reset-names = "link", "phy";
resets = <&sys_rst 12>, <&sys_rst 17>;
vbus-supply = <&usb0_vbus0>;
};
usb0_ssphy1: ss-phy@310 {
compatible = "socionext,uniphier-pxs3-usb3-ssphy";
reg = <0x310 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 12>, <&sys_clk 18>;
reset-names = "link", "phy";
resets = <&sys_rst 12>, <&sys_rst 18>;
vbus-supply = <&usb0_vbus1>;
};
};
usb1: usb@65c00000 {
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
status = "disabled";
reg = <0x65c00000 0xcd00>;
interrupt-names = "host", "peripheral";
interrupts = <0 137 4>, <0 138 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
clock-names = "ref", "bus_early", "suspend";
clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>;
resets = <&usb1_rst 15>;
phys = <&usb1_hsphy0>, <&usb1_hsphy1>,
<&usb1_ssphy0>;
dr_mode = "host";
};
usb-glue@65d00000 {
compatible = "socionext,uniphier-pxs3-dwc3-glue",
"simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x65d00000 0x400>;
usb1_rst: reset@0 {
compatible = "socionext,uniphier-pxs3-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
clock-names = "link";
clocks = <&sys_clk 13>;
reset-names = "link";
resets = <&sys_rst 13>;
};
usb1_vbus0: regulator@100 {
compatible = "socionext,uniphier-pxs3-usb3-regulator";
reg = <0x100 0x10>;
clock-names = "link";
clocks = <&sys_clk 13>;
reset-names = "link";
resets = <&sys_rst 13>;
};
usb1_vbus1: regulator@110 {
compatible = "socionext,uniphier-pxs3-usb3-regulator";
reg = <0x110 0x10>;
clock-names = "link";
clocks = <&sys_clk 13>;
reset-names = "link";
resets = <&sys_rst 13>;
};
usb1_hsphy0: hs-phy@200 {
compatible = "socionext,uniphier-pxs3-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy", "phy-ext";
clocks = <&sys_clk 13>, <&sys_clk 20>,
<&sys_clk 14>;
reset-names = "link", "phy";
resets = <&sys_rst 13>, <&sys_rst 20>;
vbus-supply = <&usb1_vbus0>;
nvmem-cell-names = "rterm", "sel_t", "hs_i";
nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
<&usb_hs_i2>;
};
usb1_hsphy1: hs-phy@210 {
compatible = "socionext,uniphier-pxs3-usb3-hsphy";
reg = <0x210 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy", "phy-ext";
clocks = <&sys_clk 13>, <&sys_clk 20>,
<&sys_clk 14>;
reset-names = "link", "phy";
resets = <&sys_rst 13>, <&sys_rst 20>;
vbus-supply = <&usb1_vbus1>;
nvmem-cell-names = "rterm", "sel_t", "hs_i";
nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
<&usb_hs_i2>;
};
usb1_ssphy0: ss-phy@300 {
compatible = "socionext,uniphier-pxs3-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy", "phy-ext";
clocks = <&sys_clk 13>, <&sys_clk 21>,
<&sys_clk 14>;
reset-names = "link", "phy";
resets = <&sys_rst 13>, <&sys_rst 21>;
vbus-supply = <&usb1_vbus0>;
};
};
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7