Merge tag 'drm-msm-fixes-2022-08-27' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

Fixes for v6.0

- Fix for inconsistent indenting in function msm_dsi_dphy_timing_calc_v3.
  This fixes a smatch warning reported by kbot
- Fix to make eDP the first connector in the connected list. This was
  mainly done to address a screen corruption issue we were seeing on
  sc7280 boards which have eDP as the primary display. The corruption
  itself is from usermode but we decided to fix it this way because
  things work correct with the primary display as the first one for
  usermode
- Fix to populate intf_cfg correctly before calling reset_intf_cfg().
  Without this, the display pipeline is not torn down correctly for
  writeback
- Specify the correct number of DSI regulators for SDM660. It should
  have been 1 but 2 was mentioned
- Specify the correct number of DSI regulators for MSM8996. It should
  have been 3 but 2 was mentioned
- Fix for removing DP_RECOVERED_CLOCK_OUT_EN bit for tps4 link training
  for DP. This was causing link training failures and hence no display
  for a specific DP to HDMI cable on chromebooks
- Fix probe-deferral crash in gpu devfreq
- Fix gpu debugfs deadlock
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuY=jd44itwTkLXVqhnoKgY0BswPTrxDTxCiPG3WbmLA@mail.gmail.com

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c

@@ -2061,6 +2061,12 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
 
 	intf_cfg.stream_sel = 0; /* Don't care value for video mode */
 	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+
+	if (phys_enc->hw_intf)
+		intf_cfg.intf = phys_enc->hw_intf->idx;
+	if (phys_enc->hw_wb)
+		intf_cfg.wb = phys_enc->hw_wb->idx;
+
 	if (phys_enc->hw_pp->merge_3d)
 		intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;
 

drivers/gpu/drm/msm/dp/dp_ctrl.c

@@ -1214,7 +1214,7 @@ static int dp_ctrl_link_train_2(struct dp_ctrl_private *ctrl,
 	if (ret)
 		return ret;
 
-	dp_ctrl_train_pattern_set(ctrl, pattern | DP_RECOVERED_CLOCK_OUT_EN);
+	dp_ctrl_train_pattern_set(ctrl, pattern);
 
 	for (tries = 0; tries <= maximum_retries; tries++) {
 		drm_dp_link_train_channel_eq_delay(ctrl->aux, ctrl->panel->dpcd);

drivers/gpu/drm/msm/dsi/dsi_cfg.c

@@ -109,7 +109,7 @@ static const char * const dsi_8996_bus_clk_names[] = {
 static const struct msm_dsi_config msm8996_dsi_cfg = {
 	.io_offset = DSI_6G_REG_SHIFT,
 	.reg_cfg = {
-		.num = 2,
+		.num = 3,
 		.regs = {
 			{"vdda", 18160, 1 },	/* 1.25 V */
 			{"vcca", 17000, 32 },	/* 0.925 V */
@@ -148,7 +148,7 @@ static const char * const dsi_sdm660_bus_clk_names[] = {
 static const struct msm_dsi_config sdm660_dsi_cfg = {
 	.io_offset = DSI_6G_REG_SHIFT,
 	.reg_cfg = {
-		.num = 2,
+		.num = 1,
 		.regs = {
 			{"vdda", 12560, 4 },	/* 1.2 V */
 		},

drivers/gpu/drm/msm/dsi/phy/dsi_phy.c

@@ -347,7 +347,7 @@ int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
 	} else {
 		timing->shared_timings.clk_pre =
 			linear_inter(tmax, tmin, pcnt2, 0, false);
-			timing->shared_timings.clk_pre_inc_by_2 = 0;
+		timing->shared_timings.clk_pre_inc_by_2 = 0;
 	}
 
 	timing->ta_go = 3;

drivers/gpu/drm/msm/msm_drv.c

@@ -469,6 +469,8 @@ static int msm_drm_init(struct device *dev, const struct drm_driver *drv)
 		}
 	}
 
+	drm_helper_move_panel_connectors_to_head(ddev);
+
 	ddev->mode_config.funcs = &mode_config_funcs;
 	ddev->mode_config.helper_private = &mode_config_helper_funcs;
 

drivers/gpu/drm/msm/msm_gpu_devfreq.c

@@ -213,6 +213,8 @@ void msm_devfreq_init(struct msm_gpu *gpu)
 
 	if (IS_ERR(df->devfreq)) {
 		DRM_DEV_ERROR(&gpu->pdev->dev, "Couldn't initialize GPU devfreq\n");
+		dev_pm_qos_remove_request(&df->idle_freq);
+		dev_pm_qos_remove_request(&df->boost_freq);
 		df->devfreq = NULL;
 		return;
 	}

drivers/gpu/drm/msm/msm_rd.c

@@ -196,6 +196,9 @@ static int rd_open(struct inode *inode, struct file *file)
 	file->private_data = rd;
 	rd->open = true;
 
+	/* Reset fifo to clear any previously unread data: */
+	rd->fifo.head = rd->fifo.tail = 0;
+
 	/* the parsing tools need to know gpu-id to know which
 	 * register database to load.
 	 *