m68k: add ColdFire mcf5441x eDMA platform support

This patch adds support for ColdFire eDMA platform driver.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>

arch/m68k/coldfire/device.c

@@ -14,11 +14,14 @@
 #include <linux/spi/spi.h>
 #include <linux/gpio.h>
 #include <linux/fec.h>
+#include <linux/dmaengine.h>
 #include <asm/traps.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
 #include <asm/mcfqspi.h>
+#include <linux/platform_data/edma.h>
+#include <linux/platform_data/dma-mcf-edma.h>
 
 /*
  *	All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.
@@ -476,6 +479,81 @@ static struct platform_device mcf_i2c5 = {
 #endif /* MCFI2C_BASE5 */
 #endif /* IS_ENABLED(CONFIG_I2C_IMX) */
 
+#if IS_ENABLED(CONFIG_MCF_EDMA)
+
+static const struct dma_slave_map mcf_edma_map[] = {
+	{ "dreq0", "rx-tx", MCF_EDMA_FILTER_PARAM(0) },
+	{ "dreq1", "rx-tx", MCF_EDMA_FILTER_PARAM(1) },
+	{ "uart.0", "rx", MCF_EDMA_FILTER_PARAM(2) },
+	{ "uart.0", "tx", MCF_EDMA_FILTER_PARAM(3) },
+	{ "uart.1", "rx", MCF_EDMA_FILTER_PARAM(4) },
+	{ "uart.1", "tx", MCF_EDMA_FILTER_PARAM(5) },
+	{ "uart.2", "rx", MCF_EDMA_FILTER_PARAM(6) },
+	{ "uart.2", "tx", MCF_EDMA_FILTER_PARAM(7) },
+	{ "timer0", "rx-tx", MCF_EDMA_FILTER_PARAM(8) },
+	{ "timer1", "rx-tx", MCF_EDMA_FILTER_PARAM(9) },
+	{ "timer2", "rx-tx", MCF_EDMA_FILTER_PARAM(10) },
+	{ "timer3", "rx-tx", MCF_EDMA_FILTER_PARAM(11) },
+	{ "fsl-dspi.0", "rx", MCF_EDMA_FILTER_PARAM(12) },
+	{ "fsl-dspi.0", "tx", MCF_EDMA_FILTER_PARAM(13) },
+	{ "fsl-dspi.1", "rx", MCF_EDMA_FILTER_PARAM(14) },
+	{ "fsl-dspi.1", "tx", MCF_EDMA_FILTER_PARAM(15) },
+};
+
+static struct mcf_edma_platform_data mcf_edma_data = {
+	.dma_channels		= 64,
+	.slave_map		= mcf_edma_map,
+	.slavecnt		= ARRAY_SIZE(mcf_edma_map),
+};
+
+static struct resource mcf_edma_resources[] = {
+	{
+		.start		= MCFEDMA_BASE,
+		.end		= MCFEDMA_BASE + MCFEDMA_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFEDMA_IRQ_INTR0,
+		.end		= MCFEDMA_IRQ_INTR0 + 15,
+		.flags		= IORESOURCE_IRQ,
+		.name		= "edma-tx-00-15",
+	},
+	{
+		.start		= MCFEDMA_IRQ_INTR16,
+		.end		= MCFEDMA_IRQ_INTR16 + 39,
+		.flags		= IORESOURCE_IRQ,
+		.name		= "edma-tx-16-55",
+	},
+	{
+		.start		= MCFEDMA_IRQ_INTR56,
+		.end		= MCFEDMA_IRQ_INTR56,
+		.flags		= IORESOURCE_IRQ,
+		.name		= "edma-tx-56-63",
+	},
+	{
+		.start		= MCFEDMA_IRQ_ERR,
+		.end		= MCFEDMA_IRQ_ERR,
+		.flags		= IORESOURCE_IRQ,
+		.name		= "edma-err",
+	},
+};
+
+static u64 mcf_edma_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device mcf_edma = {
+	.name			= "mcf-edma",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(mcf_edma_resources),
+	.resource		= mcf_edma_resources,
+	.dev = {
+		.dma_mask = &mcf_edma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &mcf_edma_data,
+	}
+};
+
+#endif /* IS_ENABLED(CONFIG_MCF_EDMA) */
+
 static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_uart,
 #if IS_ENABLED(CONFIG_FEC)
@@ -505,6 +583,9 @@ static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_i2c5,
 #endif
 #endif
+#if IS_ENABLED(CONFIG_MCF_EDMA)
+	&mcf_edma,
+#endif
 };
 
 /*

arch/m68k/coldfire/m5441x.c

@@ -137,6 +137,8 @@ struct clk *mcf_clks[] = {
 
 static struct clk * const enable_clks[] __initconst = {
 	/* make sure these clocks are enabled */
+	&__clk_0_15, /* dspi.1 */
+	&__clk_0_17, /* eDMA */
 	&__clk_0_18, /* intc0 */
 	&__clk_0_19, /* intc0 */
 	&__clk_0_20, /* intc0 */
@@ -157,8 +159,6 @@ static struct clk * const disable_clks[] __initconst = {
 	&__clk_0_8, /* can.0 */
 	&__clk_0_9, /* can.1 */
 	&__clk_0_14, /* i2c.1 */
-	&__clk_0_15, /* dspi.1 */
-	&__clk_0_17, /* eDMA */
 	&__clk_0_22, /* i2c.0 */
 	&__clk_0_23, /* dspi.0 */
 	&__clk_0_28, /* tmr.1 */

arch/m68k/include/asm/m5441xsim.h

@@ -282,6 +282,21 @@
  *  DSPI module.
  */
 #define MCFDSPI_BASE0		0xfc05c000
+#define MCFDSPI_BASE1		0xfC03c000
 #define MCF_IRQ_DSPI0		(MCFINT0_VECBASE + MCFINT0_DSPI0)
+#define MCF_IRQ_DSPI1		(MCFINT1_VECBASE + MCFINT1_DSPI1)
+/*
+ *  eDMA module.
+ */
+#define MCFEDMA_BASE		0xfc044000
+#define MCFEDMA_SIZE		0x4000
+#define MCFINT0_EDMA_INTR0	8
+#define MCFINT0_EDMA_ERR	24
+#define MCFEDMA_EDMA_INTR16	8
+#define MCFEDMA_EDMA_INTR56	0
+#define MCFEDMA_IRQ_INTR0	(MCFINT0_VECBASE + MCFINT0_EDMA_INTR0)
+#define MCFEDMA_IRQ_INTR16	(MCFINT1_VECBASE + MCFEDMA_EDMA_INTR16)
+#define MCFEDMA_IRQ_INTR56	(MCFINT2_VECBASE + MCFEDMA_EDMA_INTR56)
+#define MCFEDMA_IRQ_ERR	(MCFINT0_VECBASE + MCFINT0_EDMA_ERR)
 
 #endif /* m5441xsim_h */