arm64: dts: keembay: Add device tree for Keem Bay EVM board

Add initial device tree for Keem Bay EVM board. With this minimal device
tree the board boots fine using an initramfs image.

Link: https://lore.kernel.org/r/20200717090414.313530-6-daniele.alessandrelli@linux.intel.comReviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

MAINTAINERS

@@ -1959,6 +1959,7 @@ M:	Paul J. Murphy <paul.j.murphy@intel.com>
 M:	Daniele Alessandrelli <daniele.alessandrelli@intel.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/arm/intel,keembay.yaml
+F:	arch/arm64/boot/dts/intel/keembay-evm.dts
 F:	arch/arm64/boot/dts/intel/keembay-soc.dtsi
 
 ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT

arch/arm64/boot/dts/intel/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
 dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
 			     socfpga_agilex_socdk_nand.dtb
+dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb

arch/arm64/boot/dts/intel/keembay-evm.dts

+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation
+ *
+ * Device tree describing Keem Bay EVM board.
+ */
+
+/dts-v1/;
+
+#include "keembay-soc.dtsi"
+
+/ {
+	model = "Keem Bay EVM";
+	compatible = "intel,keembay-evm", "intel,keembay";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2GB of DDR memory. */
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+};
+
+&uart3 {
+	status = "okay";
+};