[PATCH] 2.5.21 IDE 87

 - Sync with 2.5.21

 - Don't call put_device inside idedisk_cleanup(). This is apparently triggering
   some bug inside the handling of device trees. Or we don't register the device
   properly within the tree. Check this later.

 - Further work on the channel register file access locking.  Push the locking
   out from __ide_end_request to ide_end_request.  Rename those functions to
   respective __ata_end_request() and ata_end_request().

 - Move ide_wait_status to device.c rename it to ata_status_poll().

 - Further work on locking scope issues.

 - devfs showed us once again that it changed the policy from agnostic numbers
   to unpleasant string names.

drivers/ide/device.c

@@ -79,8 +79,30 @@ void ata_mask(struct ata_device *drive)
 		ch->maskproc(drive);
 }
 
+/*
+ * Spin until the drive is no longer busy.
+ *
+ * Not exported, since it's not used within any modules.
+ */
+int ata_busy_poll(struct ata_device *drive, unsigned long timeout)
+{
+	/* spec allows drive 400ns to assert "BUSY" */
+	udelay(1);
+	if (!ata_status(drive, 0, BUSY_STAT)) {
+		timeout += jiffies;
+		while (!ata_status(drive, 0, BUSY_STAT)) {
+			if (time_after(jiffies, timeout))
+				return 1;
+		}
+	}
+
+	return 0;
+}
+
 /*
  * Check the state of the status register.
+ *
+ * FIXME: Channel lock should be held.
  */
 int ata_status(struct ata_device *drive, u8 good, u8 bad)
 {
@@ -93,6 +115,57 @@ int ata_status(struct ata_device *drive, u8 good, u8 bad)
 
 EXPORT_SYMBOL(ata_status);
 
+/*
+ * Busy-wait for the drive status to be not "busy".  Check then the status for
+ * all of the "good" bits and none of the "bad" bits, and if all is okay it
+ * returns 0.  All other cases return 1 after invoking error handler -- caller
+ * should just return.
+ *
+ * This routine should get fixed to not hog the cpu during extra long waits..
+ * That could be done by busy-waiting for the first jiffy or two, and then
+ * setting a timer to wake up at half second intervals thereafter, until
+ * timeout is achieved, before timing out.
+ *
+ * FIXME: Channel lock should be held.
+ */
+
+int ata_status_poll(struct ata_device *drive, u8 good, u8 bad,
+		unsigned long timeout,
+		struct request *rq, ide_startstop_t *startstop)
+{
+	int i;
+
+	/* bail early if we've exceeded max_failures */
+	if (drive->max_failures && (drive->failures > drive->max_failures)) {
+		*startstop = ide_stopped;
+
+		return 1;
+	}
+
+	if (ata_busy_poll(drive, timeout)) {
+		*startstop = ata_error(drive, rq, "status timeout");
+
+		return 1;
+	}
+
+	/*
+	 * Allow status to settle, then read it again.  A few rare drives
+	 * vastly violate the 400ns spec here, so we'll wait up to 10usec for a
+	 * "good" status rather than expensively fail things immediately.  This
+	 * fix courtesy of Matthew Faupel & Niccolo Rigacci.
+	 */
+	for (i = 0; i < 10; i++) {
+		udelay(1);
+		if (ata_status(drive, good, bad))
+			return 0;
+	}
+	*startstop = ata_error(drive, rq, "status error");
+
+	return 1;
+}
+
+EXPORT_SYMBOL(ata_status_poll);
+
 /*
  * Handle the nIEN - negated Interrupt ENable of the drive.
  * This is controlling whatever the drive will acnowlenge commands
@@ -160,7 +233,7 @@ void ata_out_regfile(struct ata_device *drive, struct hd_drive_task_hdr *rf)
 }
 
 /*
- * Output a complete register file.
+ * Input a complete register file.
  */
 void ata_in_regfile(struct ata_device *drive, struct hd_drive_task_hdr *rf)
 {

drivers/ide/ide-cd.c

@@ -556,7 +556,7 @@ static void cdrom_end_request(struct ata_device *drive, struct request *rq, int
 	if ((rq->flags & REQ_CMD) && !rq->current_nr_sectors)
 		uptodate = 1;
 
-	ide_end_request(drive, rq, uptodate);
+	ata_end_request(drive, rq, uptodate);
 }
 
 
@@ -734,7 +734,7 @@ static ide_startstop_t cdrom_start_packet_command(struct ata_device *drive,
 	struct cdrom_info *info = drive->driver_data;
 
 	/* Wait for the controller to be idle. */
-	if (ide_wait_stat(&startstop, drive, rq, 0, BUSY_STAT, WAIT_READY))
+	if (ata_status_poll(drive, 0, BUSY_STAT, WAIT_READY, rq, &startstop))
 		return startstop;
 
 	spin_lock_irqsave(ch->lock, flags);
@@ -798,7 +798,8 @@ static ide_startstop_t cdrom_transfer_packet_command(struct ata_device *drive,
 			return startstop;
 	} else {
 		/* Otherwise, we must wait for DRQ to get set. */
-		if (ide_wait_stat(&startstop, drive, rq, DRQ_STAT, BUSY_STAT, WAIT_READY))
+		if (ata_status_poll(drive, DRQ_STAT, BUSY_STAT,
+					WAIT_READY, rq, &startstop))
 			return startstop;
 	}
 
@@ -926,7 +927,14 @@ static ide_startstop_t cdrom_read_intr(struct ata_device *drive, struct request
 
 	if (dma) {
 		if (!dma_error) {
-			__ide_end_request(drive, rq, 1, rq->nr_sectors);
+			/* FIXME: this locking should encompass the above register
+			 * file access too.
+			 */
+
+			spin_lock_irqsave(ch->lock, flags);
+			__ata_end_request(drive, rq, 1, rq->nr_sectors);
+			spin_unlock_irqrestore(ch->lock, flags);
+
 			return ide_stopped;
 		} else
 			return ata_error(drive, rq, "dma error");
@@ -1518,7 +1526,14 @@ static ide_startstop_t cdrom_write_intr(struct ata_device *drive, struct request
 		if (dma_error)
 			return ata_error(drive, rq, "dma error");
 
-		__ide_end_request(drive, rq, 1, rq->nr_sectors);
+		/* FIXME: this locking should encompass the above register
+		 * file access too.
+		 */
+
+		spin_lock_irqsave(ch->lock, flags);
+		__ata_end_request(drive, rq, 1, rq->nr_sectors);
+		spin_unlock_irqrestore(ch->lock, flags);
+
 		return ide_stopped;
 	}
 

drivers/ide/ide-floppy.c

@@ -608,7 +608,7 @@ typedef struct {
 /*
  *	idefloppy_end_request is used to finish servicing a request.
  *
- *	For read/write requests, we will call ide_end_request to pass to the
+ *	For read/write requests, we will call ata_end_request to pass to the
  *	next buffer.
  */
 static int idefloppy_end_request(struct ata_device *drive, struct request *rq, int uptodate)
@@ -632,7 +632,7 @@ static int idefloppy_end_request(struct ata_device *drive, struct request *rq, i
 		return 0;
 
 	if (!(rq->flags & REQ_SPECIAL)) {
-		ide_end_request(drive, rq, uptodate);
+		ata_end_request(drive, rq, uptodate);
 		return 0;
 	}
 
@@ -956,9 +956,12 @@ static ide_startstop_t idefloppy_transfer_pc(struct ata_device *drive, struct re
 	ide_startstop_t startstop;
 	idefloppy_floppy_t *floppy = drive->driver_data;
 	idefloppy_ireason_reg_t ireason;
+	int ret;
 
-	if (ide_wait_stat (&startstop, drive, rq, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+	if (ata_status_poll(drive, DRQ_STAT, BUSY_STAT,
+				WAIT_READY, rq, &startstop)) {
 		printk (KERN_ERR "ide-floppy: Strange, packet command initiated yet DRQ isn't asserted\n");
+
 		return startstop;
 	}
 
@@ -968,18 +971,18 @@ static ide_startstop_t idefloppy_transfer_pc(struct ata_device *drive, struct re
 
 	spin_lock_irqsave(ch->lock, flags);
 	ireason.all=IN_BYTE (IDE_IREASON_REG);
-	if (!ireason.b.cod || ireason.b.io) {
-		spin_unlock_irqrestore(ch->lock, flags);
 
+	if (!ireason.b.cod || ireason.b.io) {
 		printk (KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while issuing a packet command\n");
-		return ide_stopped;
+		ret = ide_stopped;
+	} else {
+		ata_set_handler (drive, idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);	/* Set the interrupt routine */
+		atapi_write(drive, floppy->pc->c, 12); /* Send the actual packet */
+		ret = ide_started;
 	}
-
-	ata_set_handler (drive, idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);	/* Set the interrupt routine */
-	atapi_write(drive, floppy->pc->c, 12); /* Send the actual packet */
 	spin_unlock_irqrestore(ch->lock, flags);
 
-	return ide_started;
+	return ret;
 }
 
 
@@ -1010,39 +1013,43 @@ static ide_startstop_t idefloppy_transfer_pc1(struct ata_device *drive, struct r
 	idefloppy_floppy_t *floppy = drive->driver_data;
 	ide_startstop_t startstop;
 	idefloppy_ireason_reg_t ireason;
+	int ret;
 
-	if (ide_wait_stat(&startstop, drive, rq, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+	if (ata_status_poll(drive, DRQ_STAT, BUSY_STAT,
+				WAIT_READY, rq, &startstop)) {
 		printk (KERN_ERR "ide-floppy: Strange, packet command initiated yet DRQ isn't asserted\n");
+
 		return startstop;
 	}
+
 	/* FIXME: this locking should encompass the above register
 	 * file access too.
 	 */
 
 	spin_lock_irqsave(ch->lock, flags);
-	ireason.all=IN_BYTE (IDE_IREASON_REG);
+	ireason.all=IN_BYTE(IDE_IREASON_REG);
 	if (!ireason.b.cod || ireason.b.io) {
-		spin_unlock_irqrestore(ch->lock, flags);
-
 		printk (KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while issuing a packet command\n");
-		return ide_stopped;
-	}
+		ret = ide_stopped;
+	} else {
 
-	/*
-	 * The following delay solves a problem with ATAPI Zip 100 drives where
-	 * the Busy flag was apparently being deasserted before the unit was
-	 * ready to receive data. This was happening on a 1200 MHz Athlon
-	 * system. 10/26/01 25msec is too short, 40 and 50msec work well.
-	 * idefloppy_pc_intr will not be actually used until after the packet
-	 * is moved in about 50 msec.
-	 */
-	ata_set_handler(drive,
-			idefloppy_pc_intr,	/* service routine for packet command */
-			floppy->ticks,		/* wait this long before "failing" */
-			idefloppy_transfer_pc2);	/* fail == transfer_pc2 */
+		/*
+		 * The following delay solves a problem with ATAPI Zip 100 drives where
+		 * the Busy flag was apparently being deasserted before the unit was
+		 * ready to receive data. This was happening on a 1200 MHz Athlon
+		 * system. 10/26/01 25msec is too short, 40 and 50msec work well.
+		 * idefloppy_pc_intr will not be actually used until after the packet
+		 * is moved in about 50 msec.
+		 */
+		ata_set_handler(drive,
+				idefloppy_pc_intr,	/* service routine for packet command */
+				floppy->ticks,		/* wait this long before "failing" */
+				idefloppy_transfer_pc2);	/* fail == transfer_pc2 */
+		ret = ide_started;
+	}
 	spin_unlock_irqrestore(ch->lock, flags);
 
-	return ide_started;
+	return ret;
 }
 
 /*

drivers/ide/ide-tape.c

@@ -2196,9 +2196,12 @@ static ide_startstop_t idetape_transfer_pc(struct ata_device *drive, struct requ
 	idetape_ireason_reg_t ireason;
 	int retries = 100;
 	ide_startstop_t startstop;
+	int ret;
 
-	if (ide_wait_stat(&startstop, drive, rq, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+	if (ata_status_poll(drive, DRQ_STAT, BUSY_STAT,
+				WAIT_READY, rq, &startstop)) {
 		printk (KERN_ERR "ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n");
+
 		return startstop;
 	}
 
@@ -2220,16 +2223,16 @@ static ide_startstop_t idetape_transfer_pc(struct ata_device *drive, struct requ
 	}
 	if (!ireason.b.cod || ireason.b.io) {
 		printk (KERN_ERR "ide-tape: (IO,CoD) != (0,1) while issuing a packet command\n");
-		spin_unlock_irqrestore(ch->lock, flags);
-
-		return ide_stopped;
+		ret = ide_stopped;
+	} else {
+		tape->cmd_start_time = jiffies;
+		ata_set_handler(drive, idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);	/* Set the interrupt routine */
+		atapi_write(drive,pc->c,12);	/* Send the actual packet */
+		ret = ide_started;
 	}
-	tape->cmd_start_time = jiffies;
-	ata_set_handler(drive, idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);	/* Set the interrupt routine */
-	atapi_write(drive,pc->c,12);	/* Send the actual packet */
 	spin_unlock_irqrestore(ch->lock, flags);
 
-	return ide_started;
+	return ret;
 }
 
 static ide_startstop_t idetape_issue_packet_command(struct ata_device *drive,
@@ -2618,7 +2621,7 @@ static ide_startstop_t idetape_do_request(struct ata_device *drive, struct reque
 		 *	We do not support buffer cache originated requests.
 		 */
 		printk (KERN_NOTICE "ide-tape: %s: Unsupported command in request queue (%ld)\n", drive->name, rq->flags);
-		ide_end_request(drive, rq, 0);			/* Let the common code handle it */
+		ata_end_request(drive, rq, 0);			/* Let the common code handle it */
 		return ide_stopped;
 	}
 

drivers/ide/ide-taskfile.c

@@ -233,7 +233,8 @@ ide_startstop_t ata_taskfile(struct ata_device *drive,
 		    ar->cmd == WIN_MULTWRITE_EXT) {
 			ide_startstop_t startstop;
 
-			if (ide_wait_stat(&startstop, drive, rq, DATA_READY, drive->bad_wstat, WAIT_DRQ)) {
+			if (ata_status_poll(drive, DATA_READY, drive->bad_wstat,
+						WAIT_DRQ, rq, &startstop)) {
 				printk(KERN_ERR "%s: no DRQ after issuing %s\n",
 						drive->name, drive->mult_count ? "MULTWRITE" : "WRITE");
 				return startstop;

drivers/ide/main.c

@@ -430,7 +430,7 @@ void ide_unregister(struct ata_channel *ch)
 		struct ata_device *drive = &ch->drives[i];
 
 		if (drive->de) {
-			devfs_unregister (drive->de);
+			devfs_unregister(drive->de);
 			drive->de = NULL;
 		}
 		if (!drive->present)
@@ -1246,7 +1246,7 @@ static int ata_sys_notify(struct notifier_block *this, unsigned long event, void
 			return NOTIFY_DONE;
 	}
 
-	printk("flushing ide devices: ");
+	printk(KERN_INFO "flushing ATA/ATAPI devices: ");
 
 	for (i = 0; i < MAX_HWIFS; i++) {
 		int unit;
@@ -1264,9 +1264,10 @@ static int ata_sys_notify(struct notifier_block *this, unsigned long event, void
 			/* set the drive to standby */
 			printk("%s ", drive->name);
 			if (ata_ops(drive)) {
-				if (event != SYS_RESTART)
+				if (event != SYS_RESTART) {
 					if (ata_ops(drive)->standby && ata_ops(drive)->standby(drive))
 						continue;
+				}
 
 				if (ata_ops(drive)->cleanup)
 					ata_ops(drive)->cleanup(drive);
@@ -1290,8 +1291,7 @@ static int __init ata_module_init(void)
 {
 	printk(KERN_INFO "ATA/ATAPI device driver v" VERSION "\n");
 
-	ide_devfs_handle = devfs_mk_dir(NULL, "ata", NULL);
-	devfs_mk_symlink(NULL, "ide", DEVFS_FL_DEFAULT, "ata", NULL, NULL);
+	ide_devfs_handle = devfs_mk_dir(NULL, "ide", NULL);
 
 	/*
 	 * Because most of the ATA adapters represent the timings in unit of

drivers/ide/pcidma.c

@@ -44,7 +44,17 @@ ide_startstop_t ide_dma_intr(struct ata_device *drive, struct request *rq)
 
 	if (ata_status(drive, DRIVE_READY, drive->bad_wstat | DRQ_STAT)) {
 		if (!dma_stat) {
-			__ide_end_request(drive, rq, 1, rq->nr_sectors);
+			unsigned long flags;
+			struct ata_channel *ch = drive->channel;
+
+			/* FIXME: this locking should encompass the above register
+			 * file access too.
+			 */
+
+			spin_lock_irqsave(ch->lock, flags);
+			__ata_end_request(drive, rq, 1, rq->nr_sectors);
+			spin_unlock_irqrestore(ch->lock, flags);
+
 			return ide_stopped;
 		}
 		printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n",

drivers/ide/pdc4030.c

@@ -247,7 +247,8 @@ int __init setup_pdc4030(struct ata_channel *hwif)
 	if (pdc4030_cmd(drive, PROMISE_GET_CONFIG)) {
 		return 0;
 	}
-	if (ide_wait_stat(&startstop, drive, NULL, DATA_READY,BAD_W_STAT,WAIT_DRQ)) {
+	if (ata_status_poll(drive, DATA_READY, BAD_W_STAT,
+				WAIT_DRQ, NULL, &startstop)) {
 		printk(KERN_INFO
 			"%s: Failed Promise read config!\n",hwif->name);
 		return 0;
@@ -407,7 +408,8 @@ static ide_startstop_t promise_read_intr(struct ata_device *drive, struct reques
 	rq->nr_sectors -= nsect;
 	total_remaining = rq->nr_sectors;
 	if ((rq->current_nr_sectors -= nsect) <= 0) {
-		ide_end_request(drive, rq, 1);
+		/* FIXME: no queue locking above! */
+		ata_end_request(drive, rq, 1);
 	}
 
 	/*
@@ -461,13 +463,11 @@ static ide_startstop_t promise_read_intr(struct ata_device *drive, struct reques
  */
 static ide_startstop_t promise_complete_pollfunc(struct ata_device *drive, struct request *rq)
 {
+	unsigned long flags;
 	struct ata_channel *ch = drive->channel;
 
 	if (!ata_status(drive, 0, BUSY_STAT)) {
 		if (time_before(jiffies, ch->poll_timeout)) {
-			unsigned long flags;
-			struct ata_channel *ch = drive->channel;
-
 			/* FIXME: this locking should encompass the above
 			 * register file access too.
 			 */
@@ -488,7 +488,13 @@ static ide_startstop_t promise_complete_pollfunc(struct ata_device *drive, struc
 #ifdef DEBUG_WRITE
 	printk(KERN_DEBUG "%s: Write complete - end_request\n", drive->name);
 #endif
-	__ide_end_request(drive, rq, 1, rq->nr_sectors);
+	/* FIXME: this locking should encompass the above
+	 * register file access too.
+	 */
+
+	spin_lock_irqsave(ch->lock, flags);
+	__ata_end_request(drive, rq, 1, rq->nr_sectors);
+	spin_unlock_irqrestore(ch->lock, flags);
 
 	return ide_stopped;
 }
@@ -653,7 +659,7 @@ ide_startstop_t do_pdc4030_io(struct ata_device *drive, struct ata_taskfile *arg
 	/* Check that it's a regular command. If not, bomb out early. */
 	if (!(rq->flags & REQ_CMD)) {
 		blk_dump_rq_flags(rq, "pdc4030 bad flags");
-		ide_end_request(drive, rq, 0);
+		ata_end_request(drive, rq, 0);
 
 		return ide_stopped;
 	}
@@ -721,7 +727,8 @@ ide_startstop_t do_pdc4030_io(struct ata_device *drive, struct ata_taskfile *arg
  *	call the promise_write function to deal with writing the data out
  * NOTE: No interrupts are generated on writes. Write completion must be polled
  */
-		if (ide_wait_stat(&startstop, drive, rq, DATA_READY, drive->bad_wstat, WAIT_DRQ)) {
+		if (ata_status_poll(drive, DATA_READY, drive->bad_wstat,
+					WAIT_DRQ, rq, &startstop )) {
 			printk(KERN_ERR "%s: no DRQ after issuing "
 			       "PROMISE_WRITE\n", drive->name);
 			return startstop;
@@ -733,7 +740,8 @@ ide_startstop_t do_pdc4030_io(struct ata_device *drive, struct ata_taskfile *arg
 
 	default:
 		printk(KERN_ERR "pdc4030: command not READ or WRITE! Huh?\n");
-		ide_end_request(drive, rq, 0);
+		/* FIXME: This should already run under the lock. */
+		ata_end_request(drive, rq, 0);
 		return ide_stopped;
 	}
 }

drivers/ide/probe.c

@@ -307,16 +307,7 @@ byte eighty_ninty_three(struct ata_device *drive)
 		(drive->id->hw_config & 0x6000)) ? 1 : 0);
 }
 
-/*
- * Similar to ide_wait_stat(), except it never calls ata_error internally.
- * This is a kludge to handle the new ide_config_drive_speed() function,
- * and should not otherwise be used anywhere.  Eventually, the tuneproc's
- * should be updated to return ide_startstop_t, in which case we can get
- * rid of this abomination again.  :)   -ml
- *
- * It is gone..........
- *
- * const char *msg == consider adding for verbose errors.
+/* FIXME: Channel lock should be held.
  */
 int ide_config_drive_speed(struct ata_device *drive, byte speed)
 {
@@ -329,12 +320,10 @@ int ide_config_drive_speed(struct ata_device *drive, byte speed)
 	outb(inb(ch->dma_base + 2) & ~(1 << (5 + unit)), ch->dma_base + 2);
 #endif
 
-	/*
-	 * Don't use ide_wait_cmd here - it will attempt to set_geometry and
+	/* Don't use ide_wait_cmd here - it will attempt to set_geometry and
 	 * recalibrate, but for some reason these don't work at this point
 	 * (lost interrupt).
-	 */
-        /*
+         *
          * Select the drive, and issue the SETFEATURES command
          */
 	disable_irq(ch->irq);	/* disable_irq_nosync ?? */
@@ -350,20 +339,7 @@ int ide_config_drive_speed(struct ata_device *drive, byte speed)
 		ata_irq_enable(drive, 1);
 	udelay(1);
 
-	/*
-	 * Wait for drive to become non-BUSY
-	 */
-	if (!ata_status(drive, 0, BUSY_STAT)) {
-		unsigned long flags, timeout;
-		__save_flags(flags);	/* local CPU only */
-		ide__sti();		/* local CPU only -- for jiffies */
-		timeout = jiffies + WAIT_CMD;
-		while (!ata_status(drive, 0, BUSY_STAT)) {
-			if (time_after(jiffies, timeout))
-				break;
-		}
-		__restore_flags(flags); /* local CPU only */
-	}
+	ata_busy_poll(drive, WAIT_CMD);
 
 	/*
 	 * Allow status to settle, then read it again.

drivers/ide/tcq.c

@@ -327,6 +327,8 @@ static ide_startstop_t check_service(struct ata_device *drive, struct request *r
 
 static ide_startstop_t dmaq_complete(struct ata_device *drive, struct request *rq)
 {
+	unsigned long flags;
+	struct ata_channel *ch = drive->channel;
 	u8 dma_stat;
 
 	/*
@@ -348,7 +350,14 @@ static ide_startstop_t dmaq_complete(struct ata_device *drive, struct request *r
 		printk("%s: bad DMA status (dma_stat=%x)\n", drive->name, dma_stat);
 
 	TCQ_PRINTK("%s: ending %p, tag %d\n", __FUNCTION__, rq, rq->tag);
-	__ide_end_request(drive, rq, !dma_stat, rq->nr_sectors);
+
+	/* FIXME: this locking should encompass the above register
+	 * file access too.
+	 */
+
+	spin_lock_irqsave(ch->lock, flags);
+	__ata_end_request(drive, rq, !dma_stat, rq->nr_sectors);
+	spin_unlock_irqrestore(ch->lock, flags);
 
 	/*
 	 * we completed this command, check if we can service a new command

drivers/scsi/ide-scsi.c

@@ -244,7 +244,7 @@ static int idescsi_end_request(struct ata_device *drive, struct request *rq, int
 	unsigned long flags;
 
 	if (!(rq->flags & REQ_PC)) {
-		ide_end_request(drive, rq, uptodate);
+		ata_end_request(drive, rq, uptodate);
 		return 0;
 	}
 
@@ -399,29 +399,33 @@ static ide_startstop_t idescsi_transfer_pc(struct ata_device *drive, struct requ
 	struct Scsi_Host *host = drive->driver_data;
 	idescsi_scsi_t *scsi = idescsi_private(host);
 	struct atapi_packet_command *pc = scsi->pc;
-	byte ireason;
+	u8 ireason;
 	ide_startstop_t startstop;
+	int ret;
 
-	if (ide_wait_stat(&startstop, drive, rq, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+	if (ata_status_poll(drive, DRQ_STAT, BUSY_STAT,
+				WAIT_READY, rq, &startstop)) {
 		printk (KERN_ERR "ide-scsi: Strange, packet command initiated yet DRQ isn't asserted\n");
 		return startstop;
 	}
-	ireason = IN_BYTE (IDE_IREASON_REG);
-	if ((ireason & (IDESCSI_IREASON_IO | IDESCSI_IREASON_COD)) != IDESCSI_IREASON_COD) {
-		printk (KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while issuing a packet command\n");
-		return ide_stopped;
-	}
 
 	/* FIXME: this locking should encompass the above register
 	 * file access too.
 	 */
-
 	spin_lock_irqsave(ch->lock, flags);
-	ata_set_handler(drive, idescsi_pc_intr, get_timeout(pc), NULL);	/* Set the interrupt routine */
+	ireason = IN_BYTE(IDE_IREASON_REG);
+
+	if ((ireason & (IDESCSI_IREASON_IO | IDESCSI_IREASON_COD)) != IDESCSI_IREASON_COD) {
+		printk (KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while issuing a packet command\n");
+		ret = ide_stopped;
+	} else {
+		ata_set_handler(drive, idescsi_pc_intr, get_timeout(pc), NULL);
+		atapi_write(drive, scsi->pc->c, 12);
+		ret = ide_started;
+	}
 	spin_unlock_irqrestore(ch->lock, flags);
 
-	atapi_write(drive, scsi->pc->c, 12);			/* Send the actual packet */
-	return ide_started;
+	return ret;
 }
 
 /*

include/linux/ide.h

@@ -601,8 +601,9 @@ extern int noautodma;
 #define LOCAL_END_REQUEST	/* Don't generate end_request in blk.h */
 #include <linux/blk.h>
 
-extern int __ide_end_request(struct ata_device *, struct request *, int, unsigned int);
-extern int ide_end_request(struct ata_device *drive, struct request *, int);
+/* Not locking and locking variant: */
+extern int __ata_end_request(struct ata_device *, struct request *, int, unsigned int);
+extern int ata_end_request(struct ata_device *drive, struct request *, int);
 
 extern void ata_set_handler(struct ata_device *drive, ata_handler_t handler,
 		unsigned long timeout, ata_expiry_t expiry);
@@ -611,11 +612,6 @@ extern u8 ata_dump(struct ata_device *, struct request *, const char *);
 extern ide_startstop_t ata_error(struct ata_device *, struct request *rq, const char *);
 
 extern void ide_fixstring(char *s, const int bytecount, const int byteswap);
-
-extern int ide_wait_stat(ide_startstop_t *,
-		struct ata_device *, struct request *rq,
-		byte, byte, unsigned long);
-
 extern int ide_wait_noerr(struct ata_device *, byte, byte, unsigned long);
 
 /*
@@ -831,7 +827,11 @@ extern int drive_is_ready(struct ata_device *drive);
 
 extern void ata_select(struct ata_device *, unsigned long);
 extern void ata_mask(struct ata_device *);
+extern int ata_busy_poll(struct ata_device *, unsigned long);
 extern int ata_status(struct ata_device *, u8, u8);
+extern int ata_status_poll( struct ata_device *, u8, u8,
+		unsigned long, struct request *rq, ide_startstop_t *);
+
 extern int ata_irq_enable(struct ata_device *, int);
 extern void ata_reset(struct ata_channel *);
 extern void ata_out_regfile(struct ata_device *, struct hd_drive_task_hdr *);